Re: aptitude-Fehler nach Filesystem-Error
On Sun, Oct 22, 2006 at 02:44:25AM +0200, David Haller wrote:
> 'grep' => qr/\0{10,}/,
> Sollte Dateien mit 10 oder mehr NULs in Folge finden. Aber viele
> Binaries koennen das enthalten. Also nachpruefen.
Muss ich da ansetzen, um den Betrag höherzusetzen?
> Und? Ausgabe von 'smartctl -A'? Speziell Reallocated_Sector_Ct,
> Reallocated_Event_Count, Current_Pending_Sector und
> Offline_Uncorrectable?
Aktuelle von jetzt:
:~# smartctl -A /dev/hda
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 062 054 006 Pre-fail Always - 28104177
3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 845
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 256941002
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4956
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 854
194 Temperature_Celsius 0x0022 036 046 000 Old_age Always - 36
195 Hardware_ECC_Recovered 0x001a 062 054 000 Old_age Always - 28104177
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age Always - 1
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
Bis auf den UDMA_CRC_Error_Count kann ich nix beunruhigendes erkennen,
oder täusche ich mich da?
ciao, Dirk
--
| Akkuschrauber and AEG GSM stuff |
| The "Ruhrgebiet", best place to live in Germany! |
| Visit my homepage: http://www.nutrimatic.ping.de/ |
Reply to: