Re: specific kernel configuration for graphic card driver
There is a
Segmentation fault
when I used some other software, so I removed the fglrx-* temporarily.
when do you want to re-install let me know.
4] removal log
The following pThe following packages will be REMOVED:
fglrx-atieventsd* fglrx-control* fglrx-driver* fglrx-glx* fglrx-glx-ia32
fglrx-modules-dkms*
0 upgraded, 0 newly installed, 6 to remove and 0 not upgraded.
Removing fglrx-atieventsd ...
Stopping atieventsd: done.
Purging configuration files for fglrx-atieventsd ...
Removing fglrx-control ...
Purging configuration files for fglrx-control ...
Removing fglrx-glx-ia32 ...
Removing 'diversion of /usr/lib32/libGL.so.1.2 to
/usr/lib32/fglrx/diversions/libGL.so.1.2 by fglrx-glx-ia32'
Removing 'diversion of /usr/lib32/libGL.so.1 to
/usr/lib32/fglrx/diversions/libGL.so.1 by fglrx-glx-ia32
Removing fglrx-glx ...
Removing 'diversion of /usr/lib/libGL.so.1.2 to
/usr/lib/fglrx/diversions/libGL.so.1.2 by fglrx-glx'
Removing 'diversion of /usr/lib/libGL.so.1 to
/usr/lib/fglrx/diversions/libGL.so.1 by fglrx-glx'
Purging configuration files for fglrx-glx ...
No diversion 'diversion of /usr/lib/libGL.so.1.2 by fglrx-glx', none removed.
No diversion 'diversion of /usr/lib/libGL.so.1 by fglrx-glx', none removed.
Removing fglrx-modules-dkms ...
-------- Uninstall Beginning --------
Module: fglrx
Version: 11-3
Kernel: 2.6.38-mbp82-nhg (x86_64)
-------------------------------------
Status: Before uninstall, this module version was ACTIVE on this kernel.
fglrx.ko:
- Uninstallation
- Deleting from: /lib/modules/2.6.38-mbp82-nhg/updates/dkms/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
depmod.......
DKMS: uninstall Completed.
------------------------------
Deleting module version: 11-3
completely from the DKMS tree.
------------------------------
Done.
Removing fglrx-driver ...
Removing 'diversion of /usr/lib/xorg/modules/extensions/libglx.so to
/usr/lib/fglrx/diversions/libglx.so by fglrx-driver'
Purging configuration files for fglrx-driver ...
dpkg: warning: while removing fglrx-driver, directory '/etc/ati' not
empty so not removed.
On Thu, May 12, 2011 at 11:39 AM, lina <lina.lastname@gmail.com> wrote:
> Thanks, really appreciated it. please check below:
>
> On Thu, May 12, 2011 at 3:05 AM, Panayiotis Karabassis <panayk@gmail.com> wrote:
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> Hi!
>>
>> Regarding the error you got, did you use a command line tool such as
>> wget? You may have not downloaded the packages at all, but the web
>> pages. Anyway the error message clearly suggests that the download was
>> corrupt.
>
> before I used wget.
>
>>
>> Here is the second try. I hope no more are needed. It installs on my
>> Squeeze system, but that's as far as I got because I don't have an ATI card.
>>
>> http://code.google.com/p/fglrx-squeeze/downloads/list
>>
>> Do let me know how it goes!
>
> 1] checked
>
> # sha1sum 11-3-0panayk2_amd64.tar.bz2
> 2775f7bc5d2e8099be3aa623dbe7853ede337a2b 11-3-0panayk2_amd64.tar.bz2
>
> 2] installed
>
> The following NEW packages will be installed:
> fglrx-atieventsd fglrx-control fglrx-driver fglrx-glx fglrx-glx-ia32
> fglrx-modules-dkms
>
> grep: /etc/X11/xorg.conf: No such file or directory
> **********************************************
> NOTE: the fglrx driver is not yet configued.
> Please consider /usr/bin/aticonfig to create a
> working xorg.conf configuration.
> For example, 'sudo aticonfig --initial' should
> be sufficient for most use cases.
> **********************************************
> Setting up fglrx-glx (1:11-3-0panayk2) ...
> Setting up fglrx-glx-ia32 (1:11-3-0panayk2) ...
> Setting up fglrx-atieventsd (1:11-3-0panayk2) ...
> Starting atieventsd: done.
> Setting up fglrx-control (1:11-3-0panayk2) ...
> Setting up fglrx-modules-dkms (1:11-3-0panayk2) ...
>
> Creating symlink /var/lib/dkms/fglrx/11-3/source ->
> /usr/src/fglrx-11-3
>
> DKMS: add Completed.
>
> Kernel preparation unnecessary for this kernel. Skipping...
>
> Building module:
> cleaning build area....
> make KERNELRELEASE=2.6.38-mbp82-nhg -C
> /lib/modules/2.6.38-mbp82-nhg/build
> M=/var/lib/dkms/fglrx/11-3/build.......
> cleaning build area....
>
> DKMS: build Completed.
>
> fglrx.ko:
> Running module version sanity check.
> - Original module
> - No original module exists within this kernel
> - Installation
> - Installing to /lib/modules/2.6.38-mbp82-nhg/updates/dkms/
>
> depmod......
>
> DKMS: install Completed.
>
> Very well, no error reports this time, would you mind telling me what
> you have done?
>
> 3] Configuration problem
>
> /usr/bin# ./aticonfig --initial
> ./aticonfig: No supported adapters detected
>
> I restarted the laptop, it's the same.
> :/usr/bin# aticonfig --initial
> aticonfig: No supported adapters detected
>
> Thanks ahead for further suggestion.
>
>
>>
>> - --
>> Best regards,
>> Panayiotis Karabassis
>> -----BEGIN PGP SIGNATURE-----
>> Version: GnuPG v1.4.11 (GNU/Linux)
>> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
>>
>> iQEcBAEBAgAGBQJNyt3vAAoJEN7RcJcJCZJip4YH+wUAP4klMMe+2N2uxmBX6MrN
>> S1rxKPMABFm75C7l7y3ISU864IQrdw3LexE0DaU/2WRiB8j5wHJ7eZEglbfsxB9Z
>> Iq/7mxMTOB2A1v7Uf5ZKNlv1kH1uWwHp8E41Q2oiE0t6by63S/xTmgswy04ufeyH
>> w1EwUShpGEFTUIazqE6AEdlzTIOqKn5uKdnRBZFs2h8Bhzdkz1azx1T9RVTN8tYL
>> kCxVgxdcYTOLUXpGScpiRtf246Qysv2YiDNiaJ7Mk1HTcTXPV0Yu2sZaNsIRP+SB
>> xYLjPhXGAOtgz+YHq8YDorfmbgI/RRVc+coN71dLFr4Qp9C65vMkw6sEjxxd6hs=
>> =4h1Q
>> -----END PGP SIGNATURE-----
>>
>
> --
> Best Regards,
>
> lina
>
--
Best Regards,
lina
Reply to: