Mark Barnes, > Christopher; > > dmesg | grep hdd yields this: > > ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:DMA, hdd:pio > hdd: Seagate STT20000A, ATAPI TAPE drive > hdd: attached ide-scsi driver. Oh. In which case I think you should use from /dev/st0 (or nts0 for the no-rewind-device) since you're using ide-scsi. I think you also would need the "st" (scsi tape) module. -- regards, Christopher Pharo Glæserud