Re: ide-atapi tape drive and device files
Christopher;
That was it! Thanks for your help.
MB
On Wed, 2005-01-26 at 08:00 +0100, Christopher Pharo Glæserud wrote:
> Mark Barnes,
>
> > Christopher;
> >
> > dmesg | grep hdd yields this:
> >
> > ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:DMA, hdd:pio
> > hdd: Seagate STT20000A, ATAPI TAPE drive
> > hdd: attached ide-scsi driver.
>
> Oh. In which case I think you should use from /dev/st0 (or nts0 for
> the no-rewind-device) since you're using ide-scsi. I think you also
> would need the "st" (scsi tape) module.
>
> --
> regards,
>
> Christopher Pharo Glæserud
>
>
Reply to: