Re: ide-atapi tape drive and device files
Christopher;
dmesg | grep hdd yields this:
ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:DMA, hdd:pio
hdd: Seagate STT20000A, ATAPI TAPE drive
hdd: attached ide-scsi driver.
Mark
On Tue, 2005-01-25 at 21:32 +0100, Christopher Pharo Glæserud wrote:
> Mark Barnes,
>
> > I did get the leading / on the /dev/ht0 in the mt command, and modprobe
> > ide-tape doesn't change the result. Does /dev/hdd need to be linked
> > to /dev/ht0? Just guessing here.
>
> I think ht0 is a device that should be fine on it's own. (Given that the
> underlying modules are in place.)
>
> What does
>
> dmesg | grep hdd
>
> output?
>
> --
> regards,
>
> Christopher Pharo Glæserud
>
>
Reply to: