Re: Setting up HP LaserJet 1018 on Debian Wheezy
Csanyi Pal <csanyipal@gmail.com> writes:
> Csanyi Pal <csanyipal@gmail.com> writes:
>
>> Brian <ad44@cityscape.co.uk> writes:
>>
>>> On Wed 17 Jul 2013 at 11:33:48 +0200, Csanyi Pal wrote:
>>>
>>>> Brian <ad44@cityscape.co.uk> writes:
>>>>
>>>> > The foo2zjs documentation mentions firmware; your printer appears to
>>>> > require it. Is firmware on the system and loaded to the printer?
>>>>
>>>> I have uploaded it now, by using hannah-foo2zjs GUI, and later I used
>>>> 'sudo getweb 1018' command also.
>>>
>>> Check it gets loaded into the printer. The final post at
>>>
>>> http://foo2zjs.rkkda.com/forum/read.php?9,3553
>>>
>>> should help. Please also read usb_printerid(1).
>>
>> # usb_printerid /dev/usb/lp0
>> Error: No such device: can't open '/dev/usb/lp0'
>
> I have another problewm with USB ports when booting, I get messages,
> like:
> usb 1-4: device descriptor read/64, error -110
I have this problem continuously. I did the following:
unplug the printers USB cable, then
sudo tail -f /var/log/syslog
and plug in again the cable. Then I get the followings:
Jul 18 10:59:01 dhcppc16 kernel: [ 2743.612088] usb 1-4: new high-speed
USB device number 9 using ehci_hcd
Jul 18 10:59:06 dhcppc16 kernel: [ 2748.632171] usb 1-4: device
descriptor read/8, error -110
Jul 18 10:59:11 dhcppc16 kernel: [ 2753.752189] usb 1-4: device
descriptor read/8, error -110
Jul 18 10:59:12 dhcppc16 kernel: [ 2753.856102] hub 1-0:1.0: unable to
enumerate USB device on port 4
Jul 18 10:59:12 dhcppc16 kernel: [ 2754.124085] usb 3-2: new full-speed
USB device number 2 using uhci_hcd
Jul 18 10:59:27 dhcppc16 kernel: [ 2769.236048] usb 3-2: device
descriptor read/64, error -110
--
Regards from Pal
Reply to: