Brian <ad44@cityscape.co.uk> writes: > On Wed 17 Jul 2013 at 11:33:48 +0200, Csanyi Pal wrote: > >> Brian <ad44@cityscape.co.uk> writes: >> >> > The foo2zjs documentation mentions firmware; your printer appears to >> > require it. Is firmware on the system and loaded to the printer? >> >> I have uploaded it now, by using hannah-foo2zjs GUI, and later I used >> 'sudo getweb 1018' command also. > > Check it gets loaded into the printer. The final post at > > http://foo2zjs.rkkda.com/forum/read.php?9,3553 > > should help. Please also read usb_printerid(1). # usb_printerid /dev/usb/lp0 Error: No such device: can't open '/dev/usb/lp0' Well, what is the problem here?! >> Still can't print with the printer. [snipped] >> What can I do further to solve this problem? > > 1. Switch the printer off and on. > > 2. Enable verbose logging from cups: > > cupsctl --debug-logging I changed the line LogLevel warn to 0 Loglevel debug > 3. Empty the error log: > > echo '' > /var/log/cups/error_log > > 4. Print. > > 4. Examine /var/log/cups/error_log. Then compress it with gzip or xz and > attach it to your next mail sent here. Did so.
Attachment:
CupsLog.gz
Description: Attache Log file
I hope this helps to find the cause of the problem. -- Regards from Pal