Re: Setting up HP LaserJet 1018 on Debian Wheezy
On Wed 17 Jul 2013 at 11:33:48 +0200, Csanyi Pal wrote:
> Brian <ad44@cityscape.co.uk> writes:
>
> > The foo2zjs documentation mentions firmware; your printer appears to
> > require it. Is firmware on the system and loaded to the printer?
>
> I have uploaded it now, by using hannah-foo2zjs GUI, and later I used
> 'sudo getweb 1018' command also.
Check it gets loaded into the printer. The final post at
http://foo2zjs.rkkda.com/forum/read.php?9,3553
should help. Please also read usb_printerid(1).
> Still can't print with the printer.
>
> In syslog I have these lines regarding this problem:
>
> Jul 17 11:24:05 dhcppc16 foo2zjs-wrapper: gs -sPAPERSIZE=a4 -g9920x7016
> -r1200x600 -sDEVICE=pbmraw -dCOLORSCREEN -dMaxBitmap=500000000
> Jul 17 11:24:05 dhcppc16 foo2zjs-wrapper: foo2zjs -r1200x600 -g9920x7016
> -p9 -m1 -n1 -d1 -s7 -z1 -u 192x96 -l 192x96 -L 0 -T3 -P
> Jul 17 11:24:05 dhcppc16 kernel: [ 142.086692] usb 1-4: usbfs: process
> 3161 (usb) did not claim interface 0 before use
> Jul 17 11:24:05 dhcppc16 kernel: [ 142.336821] usb 1-4: usbfs: process
> 3161 (usb) did not claim interface 0 before use
>
>
> What can I do further to solve this problem?
1. Switch the printer off and on.
2. Enable verbose logging from cups:
cupsctl --debug-logging
3. Empty the error log:
echo '' > /var/log/cups/error_log
4. Print.
4. Examine /var/log/cups/error_log. Then compress it with gzip or xz and
attach it to your next mail sent here.
Reply to: