[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: specific kernel configuration for graphic card driver



I used this simple xorg.conf this time, it still showed me nothing.

Section "Device"
    Identifier  "ATI"
    Driver      "fglrx"
EndSection

Section "Screen"
    Identifier "Default Screen"
    DefaultDepth     24
EndSection

the Xorg.0.log something like:


Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-mbp82-nhg root=UUID=2a687c3c-ffb
4-4577-9781-beb6b88eb71b ro quiet
Build Date: 18 February 2011  08:27:24PM
xorg-server 2:1.7.7-13 (Cyril Brulebois <kibi@debian.org>)
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 14 11:42:00 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen".
	Using the first device section listed.
(**) |   |-->Device "ATI"
(==) No monitor specified for screen "Default Screen".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevic
es.
(II) Loader magic: 0x7c8aa0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1002:6741:106b:00e2 ATI Technologies Inc NI Whistler [AMD Ra
deon HD 6600M Series] rev 0, Mem @ 0x90000000/268435456, 0xb0800000/131072, I/O
@ 0x00002000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(WW) Warning, couldn't open module glx
(II) UnloadModule: "glx"
(EE) Failed to load module "glx" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.4.99.906, module version = 8.85.6
	Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.4.99.906, module version = 8.85.6
(II) ATI Proprietary Linux Driver Version Identifier:8.85.6
(II) ATI Proprietary Linux Driver Release Identifier: 8.85
(II) ATI Proprietary Linux Driver Build Date: Apr 19 2011 21:30:04
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x6741) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) AMD Video driver is running on a device generally supported by this driver
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x1b482e0
(II) fglrx(0): === [xdl_x750_atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 0.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 250
ukiDynamicMajor: found major device number 250
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 11, (OK)
ukiOpenByBusid: ukiOpenMinor returns 11
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): ATI 2D Acceleration Architecture enabled
(--) fglrx(0): Chipset: "AMD Radeon 6600M and 6700M Series" (Chipset = 0x6741)
(--) fglrx(0): (PciSubVendor = 0x106b, PciSubDevice = 0x00e2)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT
original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0x90000000
(--) fglrx(0): MMIO registers at 0xb0800000
(--) fglrx(0): I/O port at 0x00002000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): ATIF platform detected
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 13.11
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: WHISTLER
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
(II) fglrx(0): Interrupt handler installed at IRQ 53.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.7, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) fglrx(0): Output LVDS has no monitor section
(II) fglrx(0): Output DFP1 has no monitor section
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output DFP3 has no monitor section
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: LVDS
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: APP  Model: 9ca4  Serial#: 0
(II) fglrx(0): Year: 2009  Week: 22
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.310 greenY: 0.610
(II) fglrx(0): blueX: 0.150 blueY: 0.055   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 88.8 MHz   Image Size:  331 x 207 mm
(II) fglrx(0): h_active: 1440  h_sync: 1488  h_sync_end 1520
h_blank_end 1600 h_border: 0
(II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking:
926 v_border: 0
(II) fglrx(0): Unknown vendor-specific block 1
(II) fglrx(0):  LTN154BT08
(II) fglrx(0): Monitor name: Color LCD
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 	00ffffffffffff000610a49c00000000
(II) fglrx(0): 	16130103802115780ae585a3544f9c26
(II) fglrx(0): 	0e505400000001010101010101010101
(II) fglrx(0): 	010101010101ab22a0a050841a303020
(II) fglrx(0): 	36004bcf100000190000000100061030
(II) fglrx(0): 	00000000000000000a20000000fe004c
(II) fglrx(0): 	544e31353442543038000a20000000fc
(II) fglrx(0): 	00436f6c6f72204c43440a20202000ac
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): EDID for output LVDS
(II) fglrx(0): Manufacturer: APP  Model: 9ca4  Serial#: 0
(II) fglrx(0): Year: 2009  Week: 22
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.310 greenY: 0.610
(II) fglrx(0): blueX: 0.150 blueY: 0.055   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 88.8 MHz   Image Size:  331 x 207 mm
(II) fglrx(0): h_active: 1440  h_sync: 1488  h_sync_end 1520
h_blank_end 1600 h_border: 0
(II) fglrx(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking:
926 v_border: 0
(II) fglrx(0): Unknown vendor-specific block 1
(II) fglrx(0):  LTN154BT08
(II) fglrx(0): Monitor name: Color LCD
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 	00000000000000003a20454449442028
(II) fglrx(0): 	696e20686578293a0a000a00000a0026
(II) fglrx(0): 	0e505400000001015100000000000000
(II) fglrx(0): 	00000000000000003a20466972737420
(II) fglrx(0): 	64657461696c65642074696d696e6720
(II) fglrx(0): 	697320707265666572726564206d6f64
(II) fglrx(0): 	650a000a0042543038000a20000000fc
(II) fglrx(0): 	00436f6c6f72204c4100000000000000
(II) fglrx(0): EDID vendor "APP", prod id 40100
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600
900 903 909 926 -hsync -vsync (55.5 kHz)
(II) fglrx(0): Printing probed modes for output LVDS
(II) fglrx(0): Modeline "1440x900"x60.0   88.75  1440 1488 1520 1600
900 903 909 926 -hsync -vsync (55.5 kHz)
(II) fglrx(0): Modeline "1280x800"x60.0   88.75  1280 1488 1520 1600
800 903 909 926 -hsync -vsync (55.5 kHz)
(II) fglrx(0): Modeline "1280x768"x60.0   88.75  1280 1488 1520 1600
768 903 909 926 -hsync -vsync (55.5 kHz)
(II) fglrx(0): Modeline "1280x720"x60.0   88.75  1280 1488 1520 1600
720 903 909 926 -hsync -vsync (55.5 kHz)
(II) fglrx(0): Modeline "1024x768"x60.0   88.75  1024 1488 1520 1600
768 903 909 926 -hsync -vsync (55.5 kHz)
(II) fglrx(0): Modeline "800x600"x60.0   88.75  800 1488 1520 1600
600 903 909 926 -hsync -vsync (55.5 kHz)
(II) fglrx(0): Modeline "640x480"x60.0   88.75  640 1488 1520 1600
480 903 909 926 -hsync -vsync (55.5 kHz)
(II) fglrx(0): EDID for output DFP1
(II) fglrx(0): EDID for output DFP2
(II) fglrx(0): EDID for output DFP3
(II) fglrx(0): Output LVDS connected
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output DFP2 disconnected
(II) fglrx(0): Output DFP3 disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output LVDS using initial mode 1440x900
(II) fglrx(0): Display dimensions: (330, 210) mm
(II) fglrx(0): DPI set to (110, 108)
(II) fglrx(0): Eyefinity capable adapter detected.
(II) fglrx(0): Adapter AMD Radeon 6600M and 6700M Series has 4
configurable heads and 1 displays connected.
(==) fglrx(0):  PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) Loading sub module "glx"
(II) LoadModule: "glx"
(WW) Warning, couldn't open module glx
(II) UnloadModule: "glx"
(EE) fglrx: Failed to load module "glx" (module does not exist, 0)
(EE) fglrx(0): Failed to load GLX module.
(WW) fglrx(0): ***********************************************************
(WW) fglrx(0): * DRI initialization failed                               *
(WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
(WW) fglrx(0): * 2D and 3D acceleration disabled                         *
(WW) fglrx(0): ***********************************************************
(II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000


Thanks,


On Sat, May 14, 2011 at 2:41 AM, Panayiotis Karabassis <panayk@gmail.com> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> On 05/13/2011 06:40 PM, lina wrote:
>> after rebooting, I am in big trouble now. I can't enter into the
>> system. so I can't remove the copied one.
>>
>> nothing I can do, all those function keys can't enter the command line.
>
> No cause for worry.
>
> During boot, hold down the shift key, to enter grub menu.
>
> Select recovery mode.
>
> Delete /etc/X11/xorg.conf.
>
> Better yet take a look at /var/log/Xorg.0.log. It will contain
> information about what went wrong.
>
> - --
> Best regards,
>    Panayiotis Karabassis
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.11 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
>




-- 
Best Regards,

lina


Reply to: