Re: VMware + Nero - war: Gutes Brennprogramm für X gesucht, vollversion oder ähnliches!?
Marc Schiffbauer schrieb:
* Gerhard Engler schrieb am 09.07.02 um 08:40 Uhr:
Marc Schiffbauer schrieb:
* Gerhard Engler schrieb am 08.07.02 um 16:33 Uhr:
das cd entspricht deinem scd0 und das generic deinem sg0. Ich
benutze devfs, da sieht das etwas anders aus.
sieht gut aus.
Ich habe nicht verstanden was die Fehlermeldung "SCSI Target Error"
bedeutet.
mal danach gegoogled?
Ja, das mache ich immer bevor ich Mailinglisten belästige.
Ist das ein SCSI Brenner oder ein IDE mit ide-scsi?
Ich brenne mit einem TEAC 58 - Ein SCSI-Brenner (SCSI II).
Also es geht grundsätzlich, aber mittendrin beim brennen gibts den
Fehler?
Der Fehler kommt manchmal schon bei der Brenn-Simulation, machmal aber
auch erst beim echten Brennen. Unten habe ich noch die Fehler-Log-Datei
von Nero angehängt.
Wasn das für eine Hardware? Vielleicht ist die net stark
genug... ;)
Es ist ein PIII/800 mit 256 Mhz. Ich glaube, daran kann es nicht liegen.
Hier noch der Fehler-Log von Nero:
Windows 2000 5.0
WinAspi: -
ahead WinASPI: File 'C:\Programme\ahead\Nero\Wnaspi32.dll':
Ver=2.0.1.28, size=172099 bytes, created 08.07.2002 15:06:07
Nero Version: 5.5.6.4
Rekorder: <TEAC CD-R58S> Version: 1.0P - HA 0 TA
4 - 5.5.6.4
Adapter-Treiber: <BusLogic> HA 0
Drive buffer : 2678kB
Bus Type : default (0) -> SCSI
CD-ROM: <TEAC CD-R58S> Version: 1.0P - HA 0 TA
4 - 5.5.6.4
Adapter-Treiber: <BusLogic> HA 0
Bus Type : default (0) -> SCSI
=== Scsi-Device-Map ===
DiskPeripheral : VMware, VMware Virtual S1.0 BusLogic Port 0 ID
0 DMA: ?
CdRomPeripheral : TEAC CD-R58S 1.0P BusLogic Port 0 ID
4 DMA: ?
OtherPeripheral : MYLEX GAM Device BusLogic Port 0 ID
6 DMA: ?
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 17825792 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 95MB (97844kB)
Free physical memory: 12MB (12668kB)
Memory in use : 87 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Wizard: Off
CD-Image
9.7.2002
19:38:49
#1 Text 0 File Reader.cpp, Line 117
Reader running
19:38:49
#2 Text 0 File Writer.cpp, Line 127
Writer TEAC CD-R58S running
19:38:49
#3 IMAGEGEN -10 File ImageGen.cpp, Line 354
Image was written as DAO.
DAOI:
MediaCatalogNumber=''
TocType=0x20
Finalized=0x01
FirstTrack=0x01
LastTrack=0x02
ISRC=''
Blocksize=2336:
TrackMode='TRM_DATA_MODE2_2336'
TrackConfig=0x00:
FirstIndex=00:
LastIndex=01:
Index0FilePos=0 Index1FilePos=350400 NextTrackFilePos=2948032
ISRC=''
Blocksize=2336:
TrackMode='TRM_DATA_MODE2_2336'
TrackConfig=0x00:
FirstIndex=00:
LastIndex=01:
Index0FilePos=2948032 Index1FilePos=3298432 NextTrackFilePos=793265888
CUES:
000: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 (
-150)
001: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 (
-150)
002: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
003: Ctrl=0x41 Trk= 2 (0x02) Index=00 RecDep=0x00 Start=00:14.62 ( 1112)
004: Ctrl=0x41 Trk= 2 (0x02) Index=01 RecDep=0x00 Start=00:16.62 ( 1262)
005: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=75:25.58 ( 339433)
19:38:49
#4 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (original item values)
0: TRM_DATA_MODE2_2336 (CD-ROM Mode2/XA)
2 indices, index0 (150) provided
original CD pos #0 + 1112 (1112) = #1112/0:14.62
relocatable, CD pos for caching/writing not required/not required,
patch infos
1: TRM_DATA_MODE2_2336 (CD-ROM Mode2/XA)
2 indices, index0 (150) provided
original CD pos #1262 + 338171 (338171) = #339433/75:25.58
relocatable, CD pos for caching/writing not required/not required,
patch infos
--------------------------------------------------------------
19:38:58
#5 Text 0 File DlgWaitCD.cpp, Line 194
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 339435 (75:27.60)
19:39:00
#6 Text 0 File DlgWaitCD.cpp, Line 1331
Recorder: TEAC CD-R58S;
CDR code: 00 97 15 17; OSJ entry from: Ritek Co.
ATIP Data:
Special Info [hex] 1: C0 00 90, 2: 61 0F 11 (LI 97:15.17), 3: 4F
3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid),
3: 00 00 00 (invalid)
19:39:00
#7 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder TEAC CD-R58S for write in cue-sheet-DAO
DAO infos:
==========
MCN:
TOCTYPE: 0x20 Close CD
Tracks 1 to 2:
TRM_DATA_MODE2_2336, 2336/0x0, ISRC "", FilePos 0 350400 2948032
TRM_DATA_MODE2_2336, 2336/0x0, ISRC "", FilePos 2948032 3298432 793265888
19:39:00
#8 Text 0 File ThreadedTransferInterface.cpp, Line 679
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CD-ROM Mode2/XA)
2 indices, index0 (150) provided
original CD pos #0 + 1112 (1112) = #1112/0:14.62
relocatable, CD pos for caching/writing not required/not required,
patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks,
length 1112 blocks [TEAC CD-R58S ]
1: TRM_DATA_MODE2_2336 (CD-ROM Mode2/XA)
2 indices, index0 (150) provided
original CD pos #1262 + 338171 (338171) = #339433/75:25.58
relocatable, CD pos for caching/writing not required/not required,
patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks,
length 338171 blocks [TEAC CD-R58S ]
--------------------------------------------------------------
19:39:00
#9 Phase 32 File dlgbrnst.cpp, Line 1436
Start der Simulation mit 6x (900 KB/s)
19:39:00
#10 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, no CD pos, patch infos,
orig at #0): write at #0
19:39:00
#11 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 1 (relocatable, no CD pos, patch infos,
orig at #1262): write at #1262
19:52:01
#12 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
19:52:23
#13 Phase 33 File dlgbrnst.cpp, Line 1436
Simulation mit 6x (900 KB/s) war erfolgreich
19:52:24
#14 Phase 36 File dlgbrnst.cpp, Line 1436
Start des Brennvorganges mit 6x (900 KB/s)
19:52:25
#15 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 0 (relocatable, no CD pos, patch infos,
orig at #0): write at #0
19:52:25
#16 Text 0 File ThreadedTransferInterface.cpp, Line 1950
Verifying CD position of item 1 (relocatable, no CD pos, patch infos,
orig at #1262): write at #1262
19:53:07
#17 SCSI -400 File Cdrdrv.cpp, Line 1407
SCSI Exec, HA 0, TA 4, LUN 0, buffer 0x03FC0054
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0xFF 0xFF 0xFF 0x6A 0x00 0x00 0x1C 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0xB0 0xB0 0xD0 0xBA 0x00 0x00
19:53:07
#18 CDR -400 File Writer.cpp, Line 321
SCSI Target error
19:53:07
#19 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
19:53:08
#20 Text 0 File ThreadedTransfer.cpp, Line 213
conversion idle, stopping reader
19:53:15
#21 Phase 38 File dlgbrnst.cpp, Line 1436
Brennvorgang nicht erfolgreich mit 6x (900 KB/s)
19:53:15
#22 Text 0 File Scsicmd.cpp, Line 371
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\CDR4_2K.SYS': Ver=2.5 (089), size=52720 bytes, created
02.03.2001 20:55:54
File 'Drivers\CDRALW2K.SYS': Ver=1.00 (1030), size=22585 bytes, created
02.03.2001 20:55:54
--
Zum AUSTRAGEN schicken Sie eine Mail an debian-user-german-request@lists.debian.org
mit dem Subject "unsubscribe". Probleme? Mail an listmaster@lists.debian.org (engl)
Reply to: