(mes logs si ca peut aider) Re: pb de clavier (plus de shift !) depuis hier (ou ce matin)
bonjour,
je ne sais pas si ça peut renseigner quelqu'un (c'est-à-dire si
quelqu'un pourrait voir un truc qui n'est pas bon) mais, au cas où :
Security Events
=-=-=-=-=-=-=-=
Nov 27 09:01:04 localhost shutdown[5315]: shutting down for system
reboot
Nov 27 09:01:15 localhost nbd_client[7975]: Ioctl failed: Invalid
argument
Nov 27 09:01:15 localhost nbd_client[7976]: Ioctl failed: Invalid
argument
Nov 27 09:01:15 localhost nbd_client[7977]: Ioctl failed: Invalid
argument
Nov 27 09:01:15 localhost nbd_client[7978]: Ioctl failed: Invalid
argument
Nov 27 09:01:15 localhost nbd_client[7979]: Ioctl failed: Invalid
argument
Nov 27 09:01:15 localhost nbd_client[7980]: Ioctl failed: Invalid
argument
Nov 27 09:01:15 localhost nbd_client[7981]: Ioctl failed: Invalid
argument
Nov 27 09:01:15 localhost nbd_client[7982]: Ioctl failed: Invalid
argument
Nov 27 09:01:15 localhost nbd_client[7983]: Ioctl failed: Invalid
argument
Nov 27 09:01:15 localhost nbd_client[7984]: Ioctl failed: Invalid
argument
Nov 27 09:01:15 localhost nbd_client[7985]: Ioctl failed: Invalid
argument
Nov 27 09:01:15 localhost nbd_client[7986]: Ioctl failed: Invalid
argument
Nov 27 09:01:15 localhost nbd_client[7987]: Ioctl failed: Invalid
argument
Nov 27 09:01:15 localhost nbd_client[7988]: Ioctl failed: Invalid
argument
Nov 27 09:01:15 localhost nbd_client[7989]: Ioctl failed: Invalid
argument
Nov 27 09:01:15 localhost nbd_client[7990]: Ioctl failed: Invalid
argument
Nov 27 09:02:27 localhost kernel: ehci_hcd 0000:00:1d.7: debug port 1
Nov 27 09:02:27 localhost kernel: device eth0 entered promiscuous mode
Nov 27 09:02:27 localhost kernel: device eth0 left promiscuous mode
Security Events for su
=-=-=-=-=-=-=-=-=-=-=-
Nov 27 08:56:02 localhost su[6462]: + pts/0 david.bercot:root
System Events
=-=-=-=-=-=-=
Nov 27 08:55:11 localhost gdm[5317]:
gdm_auth_user_add: /home/david.bercot/.Xauthority has wrong permissions
(should be 0600)
Nov 27 08:55:12 localhost gconfd (david.bercot-6291): démarrage (version
2.12.1), pid 6291 utilisateur « david.bercot »
Nov 27 08:55:12 localhost gconfd (david.bercot-6291): Adresse
« xml:readonly:/etc/gconf/gconf.xml.mandatory » résolue vers une source
de configuration en lecture seule à la position 0
Nov 27 08:55:12 localhost gconfd (david.bercot-6291): Adresse
« xml:readwrite:/home/david.bercot/.gconf » résolue vers une source de
configuration accessible en écriture à la position 1
Nov 27 08:55:12 localhost gconfd (david.bercot-6291): Adresse
« xml:readonly:/etc/gconf/gconf.xml.defaults » résolue vers une source
de configuration en lecture seule à la position 2
Nov 27 08:55:12 localhost gconfd (david.bercot-6291): Adresse
« xml:readonly:/var/lib/gconf/debian.defaults » résolue vers une source
de configuration en lecture seule à la position 3
Nov 27 08:55:12 localhost gconfd (david.bercot-6291): Adresse
« xml:readonly:/var/lib/gconf/defaults » résolue vers une source de
configuration en lecture seule à la position 4
Nov 27 08:55:20 localhost gconfd (david.bercot-6291): Adresse
« xml:readwrite:/home/david.bercot/.gconf » résolue vers une source de
configuration accessible en écriture à la position 0
Nov 27 09:01:03 localhost gconfd (david.bercot-6291): Sortie
Nov 27 09:01:03 localhost gdm[5315]: Redémarrage du maître...
Nov 27 09:01:04 localhost init: Switching to runlevel: 6
Nov 27 09:01:15 localhost sshd[5062]: Received signal 15; terminating.
Nov 27 09:01:15 localhost ifplugd(eth0)[4892]: Exiting.
Nov 27 09:01:15 localhost ifplugd(eth1)[4917]: Exiting.
Nov 27 09:01:15 localhost ifplugd(eth2)[4926]: Exiting.
Nov 27 09:01:15 localhost kernel: nbd0: NBD_DISCONNECT
Nov 27 09:01:15 localhost kernel: nbd1: NBD_DISCONNECT
Nov 27 09:01:15 localhost kernel: nbd10: NBD_DISCONNECT
Nov 27 09:01:15 localhost kernel: nbd11: NBD_DISCONNECT
Nov 27 09:01:15 localhost kernel: nbd12: NBD_DISCONNECT
Nov 27 09:01:15 localhost kernel: nbd13: NBD_DISCONNECT
Nov 27 09:01:15 localhost kernel: nbd14: NBD_DISCONNECT
Nov 27 09:01:15 localhost kernel: nbd15: NBD_DISCONNECT
Nov 27 09:01:15 localhost kernel: nbd2: NBD_DISCONNECT
Nov 27 09:01:15 localhost kernel: nbd3: NBD_DISCONNECT
Nov 27 09:01:15 localhost kernel: nbd4: NBD_DISCONNECT
Nov 27 09:01:15 localhost kernel: nbd5: NBD_DISCONNECT
Nov 27 09:01:15 localhost kernel: nbd6: NBD_DISCONNECT
Nov 27 09:01:15 localhost kernel: nbd7: NBD_DISCONNECT
Nov 27 09:01:15 localhost kernel: nbd8: NBD_DISCONNECT
Nov 27 09:01:15 localhost kernel: nbd9: NBD_DISCONNECT
Nov 27 09:01:15 localhost kernel: nbd: unregistered device at major 43
Nov 27 09:01:15 localhost xfs[5071]: terminating
Nov 27 09:01:19 localhost rpc.statd[5269]: Caught signal 15,
un-registering and exiting.
Nov 27 09:01:19 localhost cardmgr[4338]: exiting
Nov 27 09:01:19 localhost kernel: ACPI: PCI interrupt for device
0000:02:04.0 disabled
Nov 27 09:01:19 localhost kernel: Kernel logging (proc) stopped.
Nov 27 09:01:19 localhost kernel: Kernel log daemon terminating.
Nov 27 09:01:19 localhost exiting on signal 15
Nov 27 09:02:27 localhost kernel: klogd 1.4.1#17, log source
= /proc/kmsg started.
Nov 27 09:02:27 localhost kernel:
Inspecting /boot/System.map-2.6.14-2-686-smp
Nov 27 09:02:27 localhost kernel: Loaded 21450 symbols
from /boot/System.map-2.6.14-2-686-smp.
Nov 27 09:02:27 localhost kernel: Symbols match kernel version 2.6.14.
Nov 27 09:02:27 localhost kernel: No module symbols loaded - kernel
modules not enabled.
Nov 27 09:02:27 localhost kernel: Linux version 2.6.14-2-686-smp (Debian
2.6.14-4) (fs@debian.org) (gcc version 4.0.3 20051111 (prerelease)
(Debian 4.0.2-4)) #1 SMP Sat Nov 26 13:37:07 UTC 2005
Nov 27 09:02:27 localhost kernel: BIOS-provided physical RAM map:
Nov 27 09:02:27 localhost kernel: BIOS-e820: 0000000000000000 -
000000000009fc00 (usable)
Nov 27 09:02:27 localhost kernel: BIOS-e820: 000000000009fc00 -
00000000000a0000 (reserved)
Nov 27 09:02:27 localhost kernel: BIOS-e820: 00000000000e0000 -
0000000000100000 (reserved)
Nov 27 09:02:27 localhost kernel: BIOS-e820: 0000000000100000 -
000000002fff0000 (usable)
Nov 27 09:02:27 localhost kernel: BIOS-e820: 000000002fff0000 -
000000002fffffc0 (ACPI data)
Nov 27 09:02:27 localhost kernel: BIOS-e820: 000000002fffffc0 -
0000000030000000 (ACPI NVS)
Nov 27 09:02:27 localhost kernel: BIOS-e820: 00000000ffb80000 -
00000000ffc00000 (reserved)
Nov 27 09:02:27 localhost kernel: BIOS-e820: 00000000fff80000 -
0000000100000000 (reserved)
Nov 27 09:02:27 localhost kernel: 0MB HIGHMEM available.
Nov 27 09:02:27 localhost kernel: 767MB LOWMEM available.
Nov 27 09:02:27 localhost kernel: On node 0 totalpages: 196592
Nov 27 09:02:27 localhost kernel: DMA zone: 4096 pages, LIFO batch:1
Nov 27 09:02:27 localhost kernel: Normal zone: 192496 pages, LIFO
batch:31
Nov 27 09:02:27 localhost kernel: HighMem zone: 0 pages, LIFO batch:1
Nov 27 09:02:27 localhost kernel: DMI 2.3 present.
Nov 27 09:02:27 localhost kernel: ACPI: RSDP (v000
OID_00 ) @ 0x000e6010
Nov 27 09:02:27 localhost kernel: ACPI: RSDT (v001 INSYDE RSDT_000
0x00000001 _CSI 0x00010101) @ 0x2ffface0
Nov 27 09:02:27 localhost kernel: ACPI: FADT (v001 ACER DFL322
0x00000100 _CSI 0x00010101) @ 0x2ffffaa0
Nov 27 09:02:27 localhost kernel: ACPI: BOOT (v001 INSYDE BOOT_000
0x00000001 _CSI 0x00010101) @ 0x2ffffb90
Nov 27 09:02:27 localhost kernel: ACPI: DBGP (v001 INSYDE DBGP_000
0x00000001 _CSI 0x00010101) @ 0x2ffffbc0
Nov 27 09:02:27 localhost kernel: ACPI: MADT (v001 INSYDE APIC_000
0x30303030 0000 0x30303030) @ 0x2ffffb30
Nov 27 09:02:27 localhost kernel: ACPI: SSDT (v001 INSYDE GV3Ref
0x00002000 INTL 0x20021002) @ 0x2fffad20
Nov 27 09:02:27 localhost kernel: ACPI: DSDT (v001 ACER TM290
0x00000006 MSFT 0x0100000e) @ 0x00000000
Nov 27 09:02:27 localhost kernel: ACPI: PM-Timer IO Port: 0x1008
Nov 27 09:02:27 localhost kernel: ACPI: Local APIC address 0xfee00000
Nov 27 09:02:27 localhost kernel: ACPI: LAPIC (acpi_id[0x00]
lapic_id[0x00] enabled)
Nov 27 09:02:27 localhost kernel: Processor #0 6:13 APIC version 20
Nov 27 09:02:27 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high
edge lint[0x1])
Nov 27 09:02:27 localhost kernel: ACPI: IOAPIC (id[0x01]
address[0xfec00000] gsi_base[0])
Nov 27 09:02:27 localhost kernel: IOAPIC[0]: apic_id 1, version 32,
address 0xfec00000, GSI 0-23
Nov 27 09:02:27 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0
global_irq 2 dfl dfl)
Nov 27 09:02:27 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9
global_irq 9 high level)
Nov 27 09:02:27 localhost kernel: ACPI: IRQ0 used by override.
Nov 27 09:02:27 localhost kernel: ACPI: IRQ2 used by override.
Nov 27 09:02:27 localhost kernel: ACPI: IRQ9 used by override.
Nov 27 09:02:27 localhost kernel: Enabling APIC mode: Flat. Using 1
I/O APICs
Nov 27 09:02:27 localhost kernel: Using ACPI (MADT) for SMP
configuration information
Nov 27 09:02:27 localhost kernel: Allocating PCI resources starting at
40000000 (gap: 30000000:cfb80000)
Nov 27 09:02:27 localhost kernel: Built 1 zonelists
Nov 27 09:02:27 localhost kernel: Kernel command line: root=/dev/hda1 ro
Nov 27 09:02:27 localhost kernel: mapped APIC to ffffd000 (fee00000)
Nov 27 09:02:27 localhost kernel: mapped IOAPIC to ffffc000 (fec00000)
Nov 27 09:02:27 localhost kernel: Initializing CPU#0
Nov 27 09:02:27 localhost kernel: PID hash table entries: 4096 (order:
12, 65536 bytes)
Nov 27 09:02:27 localhost kernel: Detected 1599.125 MHz processor.
Nov 27 09:02:27 localhost kernel: Using pmtmr for high-res timesource
Nov 27 09:02:27 localhost kernel: Console: colour VGA+ 80x25
Nov 27 09:02:27 localhost kernel: Dentry cache hash table entries:
131072 (order: 7, 524288 bytes)
Nov 27 09:02:27 localhost kernel: Inode-cache hash table entries: 65536
(order: 6, 262144 bytes)
Nov 27 09:02:27 localhost kernel: Memory: 774452k/786368k available
(1960k kernel code, 11320k reserved, 541k data, 212k init, 0k highmem)
Nov 27 09:02:27 localhost kernel: Checking if this processor honours the
WP bit even in supervisor mode... Ok.
Nov 27 09:02:27 localhost kernel: Calibrating delay using timer specific
routine.. 3198.83 BogoMIPS (lpj=1599417)
Nov 27 09:02:27 localhost kernel: Security Framework v1.0.0 initialized
Nov 27 09:02:27 localhost kernel: SELinux: Disabled at boot.
Nov 27 09:02:27 localhost kernel: Capability LSM initialized
Nov 27 09:02:27 localhost kernel: Mount-cache hash table entries: 512
Nov 27 09:02:27 localhost kernel: CPU: After generic identify, caps:
afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
Nov 27 09:02:27 localhost kernel: CPU: After vendor identify, caps:
afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
Nov 27 09:02:27 localhost kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Nov 27 09:02:27 localhost kernel: CPU: L2 cache: 2048K
Nov 27 09:02:27 localhost kernel: CPU: After all inits, caps: afe9fbbf
00000000 00000000 00000040 00000180 00000000 00000000
Nov 27 09:02:27 localhost kernel: Intel machine check architecture
supported.
Nov 27 09:02:27 localhost kernel: Intel machine check reporting enabled
on CPU#0.
Nov 27 09:02:27 localhost kernel: mtrr: v2.0 (20020519)
Nov 27 09:02:27 localhost kernel: Enabling fast FPU save and restore...
done.
Nov 27 09:02:27 localhost kernel: Enabling unmasked SIMD FPU exception
support... done.
Nov 27 09:02:27 localhost kernel: Checking 'hlt' instruction... OK.
Nov 27 09:02:27 localhost kernel: CPU0: Intel(R) Pentium(R) M processor
1.60GHz stepping 06
Nov 27 09:02:27 localhost kernel: Total of 1 processors activated
(3198.83 BogoMIPS).
Nov 27 09:02:27 localhost kernel: ENABLING IO-APIC IRQs
Nov 27 09:02:27 localhost kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
Nov 27 09:02:27 localhost kernel: Brought up 1 CPUs
Nov 27 09:02:27 localhost kernel: checking if image is initramfs... it
is
Nov 27 09:02:27 localhost kernel: softlockup thread 0 started up.
Nov 27 09:02:27 localhost kernel: Freeing initrd memory: 1069k freed
Nov 27 09:02:27 localhost kernel: NET: Registered protocol family 16
Nov 27 09:02:27 localhost kernel: ACPI: bus type pci registered
Nov 27 09:02:27 localhost kernel: PCI: PCI BIOS revision 2.10 entry at
0xe97e4, last bus=2
Nov 27 09:02:27 localhost kernel: PCI: Using configuration type 1
Nov 27 09:02:27 localhost kernel: ACPI: Subsystem revision 20050902
Nov 27 09:02:27 localhost kernel: ACPI: Interpreter enabled
Nov 27 09:02:27 localhost kernel: ACPI: Using IOAPIC for interrupt
routing
Nov 27 09:02:27 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Nov 27 09:02:27 localhost kernel: PCI: Probing PCI hardware (bus 00)
Nov 27 09:02:27 localhost kernel: PCI quirk: region 1000-107f claimed by
ICH4 ACPI/GPIO/TCO
Nov 27 09:02:27 localhost kernel: PCI quirk: region 1300-133f claimed by
ICH4 GPIO
Nov 27 09:02:27 localhost kernel: PCI: Ignoring BAR0-3 of IDE controller
0000:00:1f.1
Nov 27 09:02:27 localhost kernel: Boot video device is 0000:01:00.0
Nov 27 09:02:27 localhost kernel: PCI: Transparent bridge - 0000:00:1e.0
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0._PRT]
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.AGPB._PRT]
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0.HUB_._PRT]
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs
10) *11
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs
10) *5
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs
10) *0, disabled.
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs
10) *0, disabled.
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs
10) *11
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs
10) *11
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs
10) *11
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs
*10)
Nov 27 09:02:27 localhost kernel: ACPI: Embedded Controller [EC0] (gpe
28)
Nov 27 09:02:27 localhost kernel: ACPI: Device [S_D0] status [00000008]:
functional but not present; setting present
Nov 27 09:02:27 localhost kernel: Linux Plug and Play Support v0.97 (c)
Adam Belay
Nov 27 09:02:27 localhost kernel: pnp: PnP ACPI init
Nov 27 09:02:27 localhost kernel: pnp: PnP ACPI: found 10 devices
Nov 27 09:02:27 localhost kernel: PnPBIOS: Disabled by ACPI PNP
Nov 27 09:02:27 localhost kernel: PCI: Using ACPI for IRQ routing
Nov 27 09:02:27 localhost kernel: PCI: If a device doesn't work, try
"pci=routeirq". If it helps, post a report
Nov 27 09:02:27 localhost kernel: PCI: Bridge: 0000:00:01.0
Nov 27 09:02:27 localhost kernel: IO window: c000-dfff
Nov 27 09:02:27 localhost kernel: MEM window: e0000000-efffffff
Nov 27 09:02:27 localhost kernel: PREFETCH window: a0000000-afffffff
Nov 27 09:02:27 localhost kernel: PCI: Bus 3, cardbus bridge:
0000:02:04.0
Nov 27 09:02:27 localhost kernel: IO window: 0000a000-0000a0ff
Nov 27 09:02:27 localhost kernel: IO window: 0000a400-0000a4ff
Nov 27 09:02:27 localhost kernel: PREFETCH window: 90000000-91ffffff
Nov 27 09:02:27 localhost kernel: MEM window: d2000000-d3ffffff
Nov 27 09:02:27 localhost kernel: PCI: Bridge: 0000:00:1e.0
Nov 27 09:02:27 localhost kernel: IO window: a000-bfff
Nov 27 09:02:27 localhost kernel: MEM window: d0000000-dfffffff
Nov 27 09:02:27 localhost kernel: PREFETCH window: 90000000-9fffffff
Nov 27 09:02:27 localhost kernel: PCI: Setting latency timer of device
0000:00:1e.0 to 64
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt 0000:02:04.0[A] ->
GSI 16 (level, low) -> IRQ 169
Nov 27 09:02:27 localhost kernel: Simple Boot Flag at 0x37 set to 0x1
Nov 27 09:02:27 localhost kernel: audit: initializing netlink socket
(disabled)
Nov 27 09:02:27 localhost kernel: audit(1133082122.229:1): initialized
Nov 27 09:02:27 localhost kernel: VFS: Disk quotas dquot_6.5.1
Nov 27 09:02:27 localhost kernel: Dquot-cache hash table entries: 1024
(order 0, 4096 bytes)
Nov 27 09:02:27 localhost kernel: Initializing Cryptographic API
Nov 27 09:02:27 localhost kernel: isapnp: Scanning for PnP cards...
Nov 27 09:02:27 localhost kernel: isapnp: No Plug & Play device found
Nov 27 09:02:27 localhost kernel: PNP: PS/2 Controller
[PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
Nov 27 09:02:27 localhost kernel: i8042.c: Detected active multiplexing
controller, rev 1.1.
Nov 27 09:02:27 localhost kernel: serio: i8042 AUX0 port at 0x60,0x64
irq 12
Nov 27 09:02:27 localhost kernel: serio: i8042 AUX1 port at 0x60,0x64
irq 12
Nov 27 09:02:27 localhost kernel: serio: i8042 AUX2 port at 0x60,0x64
irq 12
Nov 27 09:02:27 localhost kernel: serio: i8042 AUX3 port at 0x60,0x64
irq 12
Nov 27 09:02:27 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq
1
Nov 27 09:02:27 localhost kernel: Serial: 8250/16550 driver $Revision:
1.90 $ 4 ports, IRQ sharing enabled
Nov 27 09:02:27 localhost kernel: ttyS3 at I/O 0x2e8 (irq = 3) is a
16550A
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.6[B] ->
GSI 17 (level, low) -> IRQ 177
Nov 27 09:02:27 localhost kernel: ACPI: PCI interrupt for device
0000:00:1f.6 disabled
Nov 27 09:02:27 localhost kernel: io scheduler noop registered
Nov 27 09:02:27 localhost kernel: io scheduler anticipatory registered
Nov 27 09:02:27 localhost kernel: io scheduler deadline registered
Nov 27 09:02:27 localhost kernel: io scheduler cfq registered
Nov 27 09:02:27 localhost kernel: RAMDISK driver initialized: 16 RAM
disks of 8192K size 1024 blocksize
Nov 27 09:02:27 localhost kernel: NET: Registered protocol family 2
Nov 27 09:02:27 localhost kernel: IP route cache hash table entries:
32768 (order: 5, 131072 bytes)
Nov 27 09:02:27 localhost kernel: TCP established hash table entries:
131072 (order: 8, 1048576 bytes)
Nov 27 09:02:27 localhost kernel: TCP bind hash table entries: 65536
(order: 7, 524288 bytes)
Nov 27 09:02:27 localhost kernel: TCP: Hash tables configured
(established 131072 bind 65536)
Nov 27 09:02:27 localhost kernel: TCP reno registered
Nov 27 09:02:27 localhost kernel: TCP bic registered
Nov 27 09:02:27 localhost kernel: NET: Registered protocol family 1
Nov 27 09:02:27 localhost kernel: NET: Registered protocol family 17
Nov 27 09:02:27 localhost kernel: NET: Registered protocol family 8
Nov 27 09:02:27 localhost kernel: NET: Registered protocol family 20
Nov 27 09:02:27 localhost kernel: Using IPI Shortcut mode
Nov 27 09:02:27 localhost kernel: Freeing unused kernel memory: 212k
freed
Nov 27 09:02:27 localhost kernel: mice: PS/2 mouse device common for all
mice
Nov 27 09:02:27 localhost kernel: Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
Nov 27 09:02:27 localhost kernel: ide: Assuming 33MHz system bus speed
for PIO modes; override with idebus=xx
Nov 27 09:02:27 localhost kernel: ICH4: IDE controller at PCI slot
0000:00:1f.1
Nov 27 09:02:27 localhost kernel: PCI: Enabling device 0000:00:1f.1
(0005 -> 0007)
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] ->
GSI 18 (level, low) -> IRQ 185
Nov 27 09:02:27 localhost kernel: ICH4: chipset revision 3
Nov 27 09:02:27 localhost kernel: ICH4: not 100%% native mode: will
probe irqs later
Nov 27 09:02:27 localhost kernel: ide0: BM-DMA at 0x1100-0x1107,
BIOS settings: hda:DMA, hdb:pio
Nov 27 09:02:27 localhost kernel: ide1: BM-DMA at 0x1108-0x110f,
BIOS settings: hdc:DMA, hdd:pio
Nov 27 09:02:27 localhost kernel: Probing IDE interface ide0...
Nov 27 09:02:27 localhost kernel: hda: IC25N060ATMR04-0, ATA DISK drive
Nov 27 09:02:27 localhost kernel: input: AT Translated Set 2 keyboard on
isa0060/serio0
Nov 27 09:02:27 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 27 09:02:27 localhost kernel: Probing IDE interface ide1...
Nov 27 09:02:27 localhost kernel: hdc: MATSHITADVD-RAM UJ-825S, ATAPI
CD/DVD-ROM drive
Nov 27 09:02:27 localhost kernel: Synaptics Touchpad, model: 1, fw: 5.9,
id: 0x126eb1, caps: 0xa04713/0x4000
Nov 27 09:02:27 localhost kernel: input: SynPS/2 Synaptics TouchPad on
isa0060/serio4
Nov 27 09:02:27 localhost kernel: psmouse.c: TouchPad at
isa0060/serio4/input0 lost sync at byte 1
Nov 27 09:02:27 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 27 09:02:27 localhost kernel: hda: max request size: 1024KiB
Nov 27 09:02:27 localhost kernel: hda: 117210240 sectors (60011 MB)
w/7884KiB Cache, CHS=16383/255/63, UDMA(33)
Nov 27 09:02:27 localhost kernel: hda: cache flushes supported
Nov 27 09:02:27 localhost kernel: hda: hda1 hda2 < hda5 hda6 >
Nov 27 09:02:27 localhost kernel: kjournald starting. Commit interval 5
seconds
Nov 27 09:02:27 localhost kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Nov 27 09:02:27 localhost kernel: Synaptics Touchpad, model: 1, fw: 5.9,
id: 0x126eb1, caps: 0xa04713/0x4000
Nov 27 09:02:27 localhost kernel: input: SynPS/2 Synaptics TouchPad on
isa0060/serio4
Nov 27 09:02:27 localhost kernel: Real Time Clock Driver v1.12
Nov 27 09:02:27 localhost kernel: Linux agpgart interface v0.101 (c)
Dave Jones
Nov 27 09:02:27 localhost kernel: usbcore: registered new driver usbfs
Nov 27 09:02:27 localhost kernel: usbcore: registered new driver hub
Nov 27 09:02:27 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core
version: 0.5
Nov 27 09:02:27 localhost kernel: input: PC Speaker
Nov 27 09:02:27 localhost kernel: shpchp: shpc_init : shpc_cap_offset ==
0
Nov 27 09:02:27 localhost kernel: shpchp: shpc_init : shpc_cap_offset ==
0
Nov 27 09:02:27 localhost kernel: shpchp: Standard Hot Plug PCI
Controller Driver version: 0.4
Nov 27 09:02:27 localhost kernel: agpgart: Detected an Intel 855GM
Chipset.
Nov 27 09:02:27 localhost kernel: agpgart: AGP aperture is 256M @
0xb0000000
Nov 27 09:02:27 localhost kernel: parport: PnPBIOS parport detected.
Nov 27 09:02:27 localhost kernel: parport0: PC-style at 0x378, irq 7
[PCSPP,TRISTATE,EPP]
Nov 27 09:02:27 localhost kernel: USB Universal Host Controller
Interface driver v2.3
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] ->
GSI 16 (level, low) -> IRQ 169
Nov 27 09:02:27 localhost kernel: PCI: Setting latency timer of device
0000:00:1d.0 to 64
Nov 27 09:02:27 localhost kernel: uhci_hcd 0000:00:1d.0: UHCI Host
Controller
Nov 27 09:02:27 localhost kernel: uhci_hcd 0000:00:1d.0: new USB bus
registered, assigned bus number 1
Nov 27 09:02:27 localhost kernel: uhci_hcd 0000:00:1d.0: irq 169, io
base 0x00001200
Nov 27 09:02:27 localhost kernel: hub 1-0:1.0: USB hub found
Nov 27 09:02:27 localhost kernel: hub 1-0:1.0: 2 ports detected
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] ->
GSI 19 (level, low) -> IRQ 193
Nov 27 09:02:27 localhost kernel: PCI: Setting latency timer of device
0000:00:1d.1 to 64
Nov 27 09:02:27 localhost kernel: uhci_hcd 0000:00:1d.1: UHCI Host
Controller
Nov 27 09:02:27 localhost kernel: uhci_hcd 0000:00:1d.1: new USB bus
registered, assigned bus number 2
Nov 27 09:02:27 localhost kernel: uhci_hcd 0000:00:1d.1: irq 193, io
base 0x00001600
Nov 27 09:02:27 localhost kernel: hub 2-0:1.0: USB hub found
Nov 27 09:02:27 localhost kernel: hub 2-0:1.0: 2 ports detected
Nov 27 09:02:27 localhost kernel: hw_random hardware driver 1.0.0 loaded
Nov 27 09:02:27 localhost kernel: hdc: ATAPI 24X DVD-ROM DVD-R-RAM
CD-R/RW drive, 2048kB Cache, UDMA(33)
Nov 27 09:02:27 localhost kernel: Uniform CD-ROM driver Revision: 3.20
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] ->
GSI 18 (level, low) -> IRQ 185
Nov 27 09:02:27 localhost kernel: PCI: Setting latency timer of device
0000:00:1d.2 to 64
Nov 27 09:02:27 localhost kernel: uhci_hcd 0000:00:1d.2: UHCI Host
Controller
Nov 27 09:02:27 localhost kernel: uhci_hcd 0000:00:1d.2: new USB bus
registered, assigned bus number 3
Nov 27 09:02:27 localhost kernel: uhci_hcd 0000:00:1d.2: irq 185, io
base 0x00001700
Nov 27 09:02:27 localhost kernel: hub 3-0:1.0: USB hub found
Nov 27 09:02:27 localhost kernel: hub 3-0:1.0: 2 ports detected
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] ->
GSI 23 (level, low) -> IRQ 201
Nov 27 09:02:27 localhost kernel: PCI: Setting latency timer of device
0000:00:1d.7 to 64
Nov 27 09:02:27 localhost kernel: ehci_hcd 0000:00:1d.7: EHCI Host
Controller
Nov 27 09:02:27 localhost kernel: ehci_hcd 0000:00:1d.7: new USB bus
registered, assigned bus number 4
Nov 27 09:02:27 localhost kernel: ehci_hcd 0000:00:1d.7: irq 201, io mem
0xf0000000
Nov 27 09:02:27 localhost kernel: PCI: cache line size of 32 is not
supported by device 0000:00:1d.7
Nov 27 09:02:27 localhost kernel: ehci_hcd 0000:00:1d.7: USB 2.0
initialized, EHCI 1.00, driver 10 Dec 2004
Nov 27 09:02:27 localhost kernel: hub 4-0:1.0: USB hub found
Nov 27 09:02:27 localhost kernel: hub 4-0:1.0: 6 ports detected
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.6[B] ->
GSI 17 (level, low) -> IRQ 177
Nov 27 09:02:27 localhost kernel: PCI: Setting latency timer of device
0000:00:1f.6 to 64
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] ->
GSI 17 (level, low) -> IRQ 177
Nov 27 09:02:27 localhost kernel: PCI: Setting latency timer of device
0000:00:1f.5 to 64
Nov 27 09:02:27 localhost kernel: ieee1394: Initialized config rom entry
`ip1394'
Nov 27 09:02:27 localhost kernel: ieee80211_crypt: registered algorithm
'NULL'
Nov 27 09:02:27 localhost kernel: intel8x0_measure_ac97_clock: measured
51450 usecs
Nov 27 09:02:27 localhost kernel: intel8x0: clocking to 48000
Nov 27 09:02:27 localhost kernel: ohci1394: $Rev: 1313 $ Ben Collins
<bcollins@debian.org>
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt 0000:02:00.0[A] ->
GSI 20 (level, low) -> IRQ 209
Nov 27 09:02:27 localhost kernel: ohci1394: fw-host0: OHCI-1394 1.1
(PCI): IRQ=[209] MMIO=[d0020000-d00207ff] Max Packet=[2048]
Nov 27 09:02:27 localhost kernel: usb 3-1: new low speed USB device
using uhci_hcd and address 2
Nov 27 09:02:27 localhost kernel: tg3.c:v3.42 (Oct 3, 2005)
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt 0000:02:01.0[A] ->
GSI 21 (level, low) -> IRQ 217
Nov 27 09:02:27 localhost kernel: eth0: Tigon3 [partno(BCM95788A50) rev
3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet
00:02:3f:1b:4e:68
Nov 27 09:02:27 localhost kernel: eth0: RXcsums[1] LinkChgREG[0]
MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
Nov 27 09:02:27 localhost kernel: eth0: dma_rwctrl[763f0000]
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt 0000:02:04.0[A] ->
GSI 16 (level, low) -> IRQ 169
Nov 27 09:02:27 localhost kernel: Yenta: CardBus bridge found at
0000:02:04.0 [1025:0061]
Nov 27 09:02:27 localhost kernel: Yenta: Using CSCINT to route CSC
interrupts to PCI
Nov 27 09:02:27 localhost kernel: Yenta: Routing CardBus interrupts to
PCI
Nov 27 09:02:27 localhost kernel: Yenta TI: socket 0000:02:04.0, mfunc
0x00111c12, devctl 0x46
Nov 27 09:02:27 localhost kernel: ipw2200: Intel(R) PRO/Wireless
2200/2915 Network Driver, 1.0.0
Nov 27 09:02:27 localhost kernel: ipw2200: Copyright(c) 2003-2004 Intel
Corporation
Nov 27 09:02:27 localhost kernel: ACPI: PCI Interrupt 0000:02:02.0[A] ->
GSI 22 (level, low) -> IRQ 225
Nov 27 09:02:27 localhost kernel: ipw2200: Detected Intel PRO/Wireless
2200BG Network Connection
Nov 27 09:02:27 localhost kernel: ipw2200: Radio Frequency Kill Switch
is On:
Nov 27 09:02:27 localhost kernel: Kill switch must be turned off for
wireless networking to work.
Nov 27 09:02:27 localhost kernel: Yenta: ISA IRQ mask 0x0430, PCI irq
169
Nov 27 09:02:27 localhost kernel: Socket status: 30000006
Nov 27 09:02:27 localhost kernel: pcmcia: parent PCI bridge I/O window:
0xa000 - 0xbfff
Nov 27 09:02:27 localhost kernel: cs: IO port probe 0xa000-0xbfff:
clean.
Nov 27 09:02:27 localhost kernel: pcmcia: parent PCI bridge Memory
window: 0xd0000000 - 0xdfffffff
Nov 27 09:02:27 localhost kernel: pcmcia: parent PCI bridge Memory
window: 0x90000000 - 0x9fffffff
Nov 27 09:02:27 localhost kernel: usbcore: registered new driver hiddev
Nov 27 09:02:27 localhost kernel: input: USB HID v1.11 Mouse [Logitech
USB RECEIVER] on usb-0000:00:1d.2-1
Nov 27 09:02:27 localhost kernel: usbcore: registered new driver usbhid
Nov 27 09:02:27 localhost kernel: drivers/usb/input/hid-core.c: v2.6:USB
HID core driver
Nov 27 09:02:27 localhost kernel: ieee1394: Host added:
ID:BUS[0-00:1023] GUID[00023f4853000475]
Nov 27 09:02:27 localhost kernel: eth1394: $Rev: 1312 $ Ben Collins
<bcollins@debian.org>
Nov 27 09:02:27 localhost kernel: eth1394: eth2: IEEE-1394 IPv4 over
1394 Ethernet (fw-host0)
Nov 27 09:02:27 localhost kernel: Adding 1510068k swap on /dev/hda5.
Priority:-1 extents:1 across:1510068k
Nov 27 09:02:27 localhost kernel: EXT3 FS on hda1, internal journal
Nov 27 09:02:27 localhost kernel: SCSI subsystem initialized
Nov 27 09:02:27 localhost kernel: sbp2: $Rev: 1306 $ Ben Collins
<bcollins@debian.org>
Nov 27 09:02:27 localhost kernel: ieee1394: sbp2: Driver forced to
serialize I/O (serialize_io=1)
Nov 27 09:02:27 localhost kernel: ieee1394: sbp2: Try serialize_io=0 for
better performance
Nov 27 09:02:27 localhost kernel: kjournald starting. Commit interval 5
seconds
Nov 27 09:02:27 localhost kernel: EXT3 FS on hda6, internal journal
Nov 27 09:02:27 localhost kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Nov 27 09:02:27 localhost kernel: tg3: eth0: Link is up at 100 Mbps,
full duplex.
Nov 27 09:02:27 localhost kernel: tg3: eth0: Flow control is on for TX
and on for RX.
Nov 27 09:02:27 localhost kernel: pcmcia: Detected deprecated PCMCIA
ioctl usage.
Nov 27 09:02:27 localhost kernel: pcmcia: This interface will soon be
removed from the kernel; please expect breakage unless you upgrade to
new tools.
Nov 27 09:02:27 localhost kernel: pcmcia: see
http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for
details.
Nov 27 09:02:27 localhost kernel: cs: IO port probe 0x100-0x4ff:
excluding 0x230-0x237 0x4d0-0x4d7
Nov 27 09:02:27 localhost kernel: cs: IO port probe 0x800-0x8ff: clean.
Nov 27 09:02:27 localhost kernel: cs: IO port probe 0xc00-0xcff: clean.
Nov 27 09:02:27 localhost kernel: cs: IO port probe 0xa00-0xaff: clean.
Nov 27 09:02:27 localhost kernel: tg3: eth0: Link is up at 100 Mbps,
full duplex.
Nov 27 09:02:27 localhost kernel: tg3: eth0: Flow control is on for TX
and on for RX.
Nov 27 09:02:27 localhost kernel: NET: Registered protocol family 10
Nov 27 09:02:27 localhost kernel: Disabled Privacy Extensions on device
c033d9e0(lo)
Nov 27 09:02:27 localhost kernel: IPv6 over IPv4 tunneling driver
Nov 27 09:02:27 localhost kernel: Disabled Privacy Extensions on device
eec62400(sit0)
Nov 27 09:02:27 localhost hpiod: 0.9.3 accepting connections at 32769...
Nov 27 09:02:29 localhost kernel: ACPI: Battery Slot [BAT1] (battery
present)
Nov 27 09:02:29 localhost kernel: ACPI: AC Adapter [ACAD] (off-line)
Nov 27 09:02:30 localhost kernel: ACPI: CPU0 (power states: C1[C1]
C2[C2] C3[C3] C4[C3])
Nov 27 09:02:30 localhost kernel: ACPI: Processor [CPU0] (supports 8
throttling states)
Nov 27 09:02:30 localhost kernel: ACPI: Power Button (FF) [PWRF]
Nov 27 09:02:30 localhost kernel: ACPI: Lid Switch [LID]
Nov 27 09:02:30 localhost kernel: ACPI: Power Button (CM) [PWRB]
Nov 27 09:02:30 localhost kernel: ACPI: Sleep Button (CM) [SLPB]
Nov 27 09:02:32 localhost kernel: lp0: using parport0
(interrupt-driven).
Nov 27 09:02:36 localhost kernel: eth0: no IPv6 routers present
Nov 27 09:02:37 localhost kernel: eth1 (WE) : Driver using
old /proc/net/wireless support, please fix driver !
Nov 27 09:02:37 localhost ifplugd(eth0)[4886]: ifplugd 0.26
initializing.
Nov 27 09:02:37 localhost ifplugd(eth0)[4886]: Using interface
eth0/00:02:3F:1B:4E:68 with driver <tg3> (version: 3.42)
Nov 27 09:02:37 localhost ifplugd(eth0)[4886]: Using detection mode:
SIOCETHTOOL
Nov 27 09:02:37 localhost ifplugd(eth0)[4886]: Initialization complete,
link beat detected.
Nov 27 09:02:37 localhost ifplugd(eth0)[4886]: Executing
'/etc/ifplugd/ifplugd.action eth0 up'.
Nov 27 09:02:37 localhost ifplugd(eth0)[4886]: client: /sbin/ifup:
interface eth0 already configured
Nov 27 09:02:37 localhost ifplugd(eth0)[4886]: Program executed
successfully.
Nov 27 09:02:37 localhost ifplugd(eth1)[4909]: ifplugd 0.26
initializing.
Nov 27 09:02:37 localhost ifplugd(eth1)[4909]: Using interface
eth1/00:00:00:00:00:00 with driver <ipw2200> (version: 1.0.0)
Nov 27 09:02:37 localhost ifplugd(eth1)[4909]: Using detection mode:
SIOCETHTOOL
Nov 27 09:02:37 localhost ifplugd(eth1)[4909]: Initialization complete,
link beat not detected.
Nov 27 09:02:37 localhost ifplugd(eth2)[4916]: ifplugd 0.26
initializing.
Nov 27 09:02:37 localhost ifplugd(eth2)[4916]: Using interface
eth2/00:02:3F:48:53:00 with driver <eth1394> (version: $Rev: 1312 $)
Nov 27 09:02:37 localhost ifplugd(eth2)[4916]: Using detection mode:
IFF_RUNNING
Nov 27 09:02:37 localhost ifplugd(eth2)[4916]: Initialization complete,
link beat detected.
Nov 27 09:02:37 localhost ifplugd(eth2)[4916]: Executing
'/etc/ifplugd/ifplugd.action eth2 up'.
Nov 27 09:02:37 localhost ifplugd(eth2)[4916]: client: Ignoring unknown
interface eth2=eth2.
Nov 27 09:02:37 localhost ifplugd(eth2)[4916]: Program executed
successfully.
Nov 27 09:02:38 localhost kernel: nbd: registered device at major 43
Nov 27 09:02:39 localhost sshd[5053]: Server listening on :: port 22.
Nov 27 09:02:40 localhost xfs[5062]: ignoring font path
element /usr/lib/X11/fonts/cyrillic/ (unreadable)
Nov 27 09:02:41 localhost rpc.statd[5239]: Version 1.0.7 Starting
Nov 27 09:02:41 localhost rpc.statd[5239]: statd running as root.
chown /var/lib/nfs/sm to choose different user
Nov 27 09:02:42 localhost dhcpd:
Nov 27 09:02:42 localhost dhcpd: No subnet declaration for eth0
(192.168.1.31).
Nov 27 09:02:42 localhost dhcpd: ** Ignoring requests on eth0. If this
is not what
Nov 27 09:02:42 localhost dhcpd: you want, please write a subnet
declaration
Nov 27 09:02:42 localhost dhcpd: in your dhcpd.conf file for the
network segment
Nov 27 09:02:42 localhost dhcpd: to which interface eth0 is attached.
**
Nov 27 09:02:42 localhost dhcpd:
Nov 27 09:02:42 localhost dhcpd:
Nov 27 09:02:42 localhost dhcpd: Not configured to listen on any
interfaces!
Nov 27 09:02:48 localhost kernel: eth1: no IPv6 routers present
merci d'avance
david
Le samedi 26 novembre 2005 à 22:41 +0100, David BERCOT a écrit :
> > > alors en fait, j'ai cherché un peu plus et j'ai trouvé console-data
> > > (voire kbd)
> > > si je fais un dpkg-reconfigure console-data, j'essaye de choisir la
> > > bonne disposition : azerty, french, etc mais ça ne change rien
> > > maintenant, si je refait la même chose (pour tester) en lui disant que
> > > j'ai un clavier qwerty, il ne change rien non plus et je suis encore en
> > > azerty !!!
> > >
> > > euh, c'est bizarre, non
> > > il y a peut être un truc qui m'aurait échappé !!!
> >
> > Ça ne fonctionne qu'en console. Si tu es dans un environnement graphique,
> > il faut regarder la configuration d'XOrg, de Gnome ou de KDE.
>
> ok mais, même en console, ça ne marchait pas !
> et pour l'environnement graphique, il y a quelque chose à reconfigurer
> (point d'interrogation)
> maintenant, mon problème est aussi bien en console que dans
> l'environnement graphique
>
> et pour répondre à ta question d'un mail précédent, non, je ne peux pas
> basculer via ctrl-alt-f(quelque chose)
>
> bref, c'est vraiment bizarre
>
> > > david
> > >
> > > ps : ça devient lourd ce demi-clavier !!!
> >
> > Moitié moins lourd qu'un clavier entier ?
>
> ;-)
>
> david
>
>
>
Reply to: