Configuration Xfrree
Bonjour
Voila depuis une semaine j'ai decidé de configurer le mode graphique
pour ma debian Woodi.
Lorsque que je fait startx l'ecran affiche une fenetre graphique avec
une croix au centre et ce referme aussitôt
je soupsone de ne pas utiliser le bon pilote pour ma carte S3 Inc
Trio3D/2X mais je cherche(certainement trés mal) sur internet et ne
trouve pas d'indications precises.
J'ai configuré avec S3Virge car il y'à S3 dedant
Je vous met le log Xfree, meme en resolvant le soucis de souris cela ne
marche pas mieux.
Merci d'avance d'aider le debutant que je suis (mais vous l'avez dejà
deviné) ;-)
Denis
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Jun 18 20:40:29 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Relisys 17"
(**) | |-->Device "S3 Inc. Trio 3D/2X"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "fr"
(**) XKB: layout: "fr"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 11
(WW) Cannot open APM
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card 1019,0954 rev 44 class 06,00,00
hdr 00
(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00
hdr 01
(II) PCI: 00:07:0: chip 1106,0596 card 1106,0000 rev 12 class 06,01,00
hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 06 class 01,01,8a
hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 08 class 0c,03,00
hdr 00
(II) PCI: 00:07:3: chip 1106,3051 card 0000,0000 rev 20 class 06,00,00
hdr 00
(II) PCI: 00:0b:0: chip 100b,0020 card 1385,f311 rev 00 class 02,00,00
hdr 00
(II) PCI: 00:0d:0: chip 13f6,0111 card 13f6,0111 rev 10 class 04,01,00
hdr 80
(II) PCI: 00:0d:1: chip 13f6,0211 card 13f6,0211 rev 10 class 07,80,00
hdr 00
(II) PCI: 01:00:0: chip 5333,8a13 card 5333,8a13 rev 02 class 03,00,00
hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Host-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
(II) Bus 1 prefetchable memory range:
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus -1: bridge is at (0:0:0), (-1,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) S3 Trio3D/2X rev 2, Mem @ 0xd8000000/26
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xe1000000 - 0xe1000fff (0x1000) MX[B]
[1] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[2] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[3] -1 0 0x0000e000 - 0x0000e03f (0x40) IX[B]
[4] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[5] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[6] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[7] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe1000000 - 0xe1000fff (0x1000) MX[B]
[1] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[2] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[3] -1 0 0x0000e000 - 0x0000e03f (0x40) IX[B]
[4] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[5] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[6] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[7] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe1000000 - 0xe1000fff (0x1000) MX[B]
[6] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[7] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x0000e000 - 0x0000e03f (0x40) IX[B]
[11] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[12] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[13] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[14] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "pex5"
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension X3D-PEX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: "s3virge"
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="Kevin Brosius"
compiled for 4.1.0.1, module version = 1.6.13
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
S3VIdentify
(II) S3VIRGE: driver (version 1.6.13) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(II) Primary Device is: PCI 01:00:0
S3VProbe begin
(--) Assigning device section with no busID to primary device
(--) Chipset trio 3d/2x found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe1000000 - 0xe1000fff (0x1000) MX[B]
[6] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[7] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x0000e000 - 0x0000e03f (0x40) IX[B]
[11] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[12] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[13] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[14] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
S3VProbe end
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe1000000 - 0xe1000fff (0x1000) MX[B]
[6] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[7] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000e000 - 0x0000e03f (0x40) IX[B]
[14] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[15] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[17] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
[18] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[19] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
S3VPreInit 1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(**) S3VIRGE(0): Depth 24, (--) framebuffer bpp 24
(==) S3VIRGE(0): RGB weight 888
(==) S3VIRGE(0): Default visual is TrueColor
S3VGetRec
(==) S3VIRGE(0): Using HW Cursor
(==) S3VIRGE(0): Using fb.
(==) S3VIRGE(0): XVideo allowed (depends on chipset).
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) S3VIRGE(0): initializing int10
(II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000
(II) S3VIRGE(0): VESA BIOS detected
(II) S3VIRGE(0): VESA VBE Version 2.0
(II) S3VIRGE(0): VESA VBE Total Mem: 4096 kB
(II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated. 86C362
(II) S3VIRGE(0): VESA VBE OEM Software Rev: 1.1
(II) S3VIRGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) S3VIRGE(0): VESA VBE OEM Product: Trio3D/2X
(II) S3VIRGE(0): VESA VBE OEM Product Rev: Rev C
(--) S3VIRGE(0): Chipset: "trio 3d/2x"
S3VMapMem
S3VEnableMmio
S3VPreInit vgaCRIndex=3d4, vgaIOBase=3d0, MMIOBase=4023a000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) S3VIRGE(0): VESA VBE DDC supported
(II) S3VIRGE(0): VESA VBE DDC Level 2
(II) S3VIRGE(0): VESA VBE DDC transfer in appr. 1 sec.
(II) S3VIRGE(0): VESA VBE DDC read successfully
(II) S3VIRGE(0): Manufacturer: REL Model: 770 Serial#: 1825
(II) S3VIRGE(0): Year: 1999 Week: 40
(II) S3VIRGE(0): EDID Version: 1.2
(II) S3VIRGE(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V
(II) S3VIRGE(0): Sync: Separate
(II) S3VIRGE(0): Max H-Image Size [cm]: horiz.: 31 vert.: 23
(II) S3VIRGE(0): Gamma: 1.35
(II) S3VIRGE(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) S3VIRGE(0): redX: 0.609 redY: 0.342 greenX: 0.298 greenY: 0.588
(II) S3VIRGE(0): blueX: 0.150 blueY: 0.063 whiteX: 0.283 whiteY: 0.298
(II) S3VIRGE(0): Supported VESA Video Modes:
(II) S3VIRGE(0): 640x480@60Hz
(II) S3VIRGE(0): 640x480@75Hz
(II) S3VIRGE(0): 800x600@75Hz
(II) S3VIRGE(0): 1024x768@75Hz
(II) S3VIRGE(0): Manufacturer's mask: 0
(II) S3VIRGE(0): Supported Future Video Modes:
(II) S3VIRGE(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) S3VIRGE(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) S3VIRGE(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) S3VIRGE(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) S3VIRGE(0): Supported additional Video Mode:
(II) S3VIRGE(0): clock: 110.2 MHz Image Size: 306 x 230 mm
(II) S3VIRGE(0): h_active: 1280 h_sync: 1344 h_sync_end 1508
h_blank_end 1728 h_border: 0
(II) S3VIRGE(0): v_active: 1024 v_sync: 1026 v_sync_end 1029
v_blanking: 1067 v_border: 0
(II) S3VIRGE(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 72
kHz, PixClock max 110 MHz
(II) S3VIRGE(0): Monitor name: Relisys 770
(II) S3VIRGE(0): Serial No: TX92871825
(==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) S3VIRGE(0): videoram: 4096k (plus 4096k off-screen)
(--) S3VIRGE(0): Detected current MCLK value of 100.227 MHz
S3VDisableMmio
S3VPreInit minClock=20000, maxClock=270000
(II) S3VIRGE(0): Relisys 17: Using hsync range of 30.00-70.00 kHz
(II) S3VIRGE(0): Relisys 17: Using vrefresh range of 50.00-160.00 Hz
(II) S3VIRGE(0): Clock range: 20.00 to 270.00 MHz
(II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory
for mode)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory
for mode)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory
for mode)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory
for mode)
(II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory
for mode)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory
for mode)
(II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory
for mode)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory
for mode)
(II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory
for mode)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory
for mode)
(II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory
for mode)
(II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory
for mode)
(II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory
for mode)
(--) S3VIRGE(0): Virtual size is 1152x864 (pitch 1152)
(**) S3VIRGE(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) S3VIRGE(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864
865 868 900 +hsync +vsync
(**) S3VIRGE(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768
769 772 808 +hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "800x600" 56.30 800 832 896 1048 600 601
604 631 +hsync +vsync
(**) S3VIRGE(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 36.00 640 696 752 832 480 481
484 509 -hsync -vsync
(++) S3VIRGE(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd8000000 - 0xdbffffff (0x4000000) MS[B]
[1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xe1000000 - 0xe1000fff (0x1000) MX[B]
[7] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
[8] -1 0 0xd8000000 - 0xdbffffff (0x4000000) MX[B](B)
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x0000e000 - 0x0000e03f (0x40) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[16] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[18] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
[19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
S3VScreenInit
S3VMapMem
(==) S3VIRGE(0): Write-combining range (0xd8000000,0x400000)
S3VEnableMmio
S3VSave
S3VSave - cr3a: 1 (adding 0x80)
S3VSave - cr3a: 1 (adding 0x80-2)
(II) S3VIRGE(0): MMPR regs: ffffffff ffffffff ffffffff ffffffff
ViRGE driver: saved current video mode. Register dump:
(II) S3VIRGE(0): START register dump ------------------
Misc Out[3CC]
67
CR[00-2f]
5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 3f ff
9c 8e 8f 28 1f 96 b9 a3 ff ff ff ff ff ff ff ff
ff 00 00 00 00 00 00 00 00 00 00 00 00 8a 13 02
SR[00-27]
03 00 03 00 02 05 06 07 06 00 02 00 0c 00 00 00
41 52 61 28 00 03 00 02 00 00 0c 00 00 00 04 00
00 00 c2 36 c2 3d 40 08
Gr Cont GR[00-0f]
00 00 00 00 00 10 0e 00 ff f9 fa fb fc fd fe ff
Att Cont AR[00-1f]
20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
0c 00 0f 08 00 35 36 37 0c 00 0f 08 00 3d 3e 3f
CR[30-6f]
e1 05 40 00 00 00 1f 9f 5b bd 05 00 10 00 07 00
00 04 04 00 00 00 01 4a 48 9b ff 00 03 e0 c0 c0
00 00 90 08 00 00 00 00 03 d8 00 00 00 00 00 00
05 05 05 00 00 00 80 00 ff e0 c0 01 09 01 bf f8
(II) S3VIRGE(0): END register dump --------------------
S3VModeInit
S3VMdInit - cr3a: 41 (probe)
S3VMdInit - cr3a: d1 (new)
S3VModeInit dclk=108000
S3VInitSTREAMS
S3VWriteMode
S3VWrMode - cr3a: d1 (set 3a)
S3VWrMode - restoring cr3a: d1 (adding 0x80)
S3VGEReset sub_stat=1100b000
(II) S3VIRGE(0): ViRGE driver: done restoring mode, dumping CR registers:
(II) S3VIRGE(0): START register dump ------------------
Misc Out[3CC]
2f
CR[00-2f]
c3 8f 8f 86 98 08 82 ff 00 60 00 00 00 00 00 00
61 24 5f b0 00 5f 82 c3 ff ff ff ff ff ff ff ff
ff 00 00 00 00 00 00 00 00 00 00 00 00 8a 13 02
SR[00-27]
03 01 0f 00 0e 05 06 07 06 00 02 00 0c 00 00 00
41 52 46 77 00 83 00 02 00 00 0c 00 00 00 04 00
00 00 c2 36 c2 3d 40 08
Gr Cont GR[00-0f]
00 00 00 00 00 40 05 0f ff f9 fa fb fc fd fe ff
Att Cont AR[00-1f]
60 61 62 63 64 65 66 67 68 69 6a 6b 6c 6d 6e 6f
41 00 0f 00 00 35 36 37 41 00 0f 00 00 3d 3e 3f
CR[30-6f]
e1 8c 40 21 00 00 1f 9f 5b bd 95 ae 61 00 51 00
00 04 04 00 00 00 01 4a 48 9b ff 00 03 e0 c0 c0
00 10 90 08 00 10 00 00 13 d8 00 00 00 00 40 40
05 05 05 08 08 20 89 74 ff e0 c0 01 09 01 bf f8
(II) S3VIRGE(0): END register dump --------------------
(**) S3VIRGE(0): Using FB
(II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Solid Horizontal and Vertical Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
18 128x128 slots
(==) S3VIRGE(0): Backing store disabled
(==) S3VIRGE(0): Silken mouse enabled
S3VDGAInit
S3VDGAInit firstone vpWid=1152, vpHgt=864, Bpp=3, mdbitsPP=24
S3VDGAInit firstone vpWid=1024, vpHgt=768, Bpp=3, mdbitsPP=24
S3VDGAInit firstone vpWid=800, vpHgt=600, Bpp=3, mdbitsPP=24
S3VDGAInit firstone vpWid=640, vpHgt=480, Bpp=3, mdbitsPP=24
S3VHWCursorInit
(**) Option "dpms"
(**) S3VIRGE(0): DPMS enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
PEXExtensionInit: Couldn't open default PEX font file Roman_M
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/gpmdata"
(==) Configured Mouse: Buttons: 3
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Option "Protocol" "ImPS/2"
(**) Generic Mouse: Protocol: "ImPS/2"
(**) Option "SendCoreEvents" "true"
(**) Generic Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(EE) xf86OpenSerial: Cannot open device /dev/input/mice
No such device.
(EE) Generic Mouse: cannot open input device
(EE) PreInit failed for input device "Generic Mouse"
(II) UnloadModule: "mouse"
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
Could not init font path element unix/:7100, removing from list!
S3VWriteMode
S3VGEReset sub_stat=1100b000
S3VWrMode - cr3a: 1 (set 3a)
S3VWrMode - restoring cr3a: 1 (adding 0x80)
(II) S3VIRGE(0): ViRGE driver: done restoring mode, dumping CR registers:
(II) S3VIRGE(0): START register dump ------------------
Misc Out[3CC]
67
CR[00-2f]
5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 3f ff
9c 8e 8f 28 1f 96 b9 a3 ff ff ff ff ff ff ff ff
ff 00 00 00 00 00 00 00 00 00 00 00 00 8a 13 02
SR[00-27]
03 00 03 00 02 05 06 07 06 00 02 00 0c 00 00 00
41 52 61 28 00 03 00 02 00 00 0c 00 00 00 04 00
00 00 c2 36 c2 3d 40 08
Gr Cont GR[00-0f]
00 00 00 00 00 10 0e 00 ff f9 fa fb fc fd fe ff
Att Cont AR[00-1f]
20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
0c 00 0f 08 00 35 36 37 0c 00 0f 08 00 3d 3e 3f
CR[30-6f]
e1 05 40 01 00 00 1f 9f 5b bd 05 00 10 00 a5 00
00 04 04 00 00 00 02 39 39 a9 00 ff ff ff c0 c0
00 00 90 08 00 00 00 00 03 d8 00 00 00 00 00 00
05 05 05 00 00 00 80 00 ff e0 c0 01 09 01 bf f8
(II) S3VIRGE(0): END register dump --------------------
S3VDisableMmio
Reply to: