[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: can't partition disk?



Jiann-Ming Su wrote:
> On Tue, 29 Mar 2005 00:21:47 +0100, Martin Michlmayr <tbm@cyrius.com> wrote:
> > 
> > I think this is no longer needed now.  Can you please test the new
> > image and let me know if it works without this append parameter?  I
> > don't have a monitor here so I can only test serial console installs.
> > 
> 
> Your newest image (2005-03-28) works.  I used "bootp():
> root=/dev/ram0" as the only boot parameter.  The keyboard problem from
> the previous image only occurred in the graphical console.  Serial
> console was fine.  The newest image doesn't have keyboard problems in
> either.
> 
> How do I configure the O2 to boot linux automatically?  I've tried:
> 
>   > setenv OSLoader linux
>   > setenv SystemPartition pci(0)scsi(0)disk(1)rdisk(0)partition(8)
>   > setenv OSLoadPartition /dev/sda1

setenv SystemPartition pci(0)scsi(0)disk(1)rdisk(0)partition(8)
setenv OSLoadPartition pci(0)scsi(0)disk(1)rdisk(0)partition(0)
setenv OSLoader arcboot
setenv OSLoadFilename Linux


Thiemo



Reply to: