Re: scheda tv
Ti ringrazio davvero, e ringrazio di nuovo Leonardo Boselli, che mi ha consigliato di compilare i2c e videodev come moduli.
Ma ancora non va.
L'output di modprobe bttv e' sempre quello, cioe':
/lib/modules/2.4.20-686-1.300403ter/kernel/drivers/media/video/bttv.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
/lib/modules/2.4.20-686-1.300403ter/kernel/drivers/media/video/bttv.o: insmod /lib/modules/2.4.20-686-1.300403ter/kernel/drivers/media/video/bttv.o failed
/lib/modules/2.4.20-686-1.300403ter/kernel/drivers/media/video/bttv.o: insmod bttv failed
il mio /etc/modules:
i2c-core
i2c-algo-bit
videodev
bttv
i2c-dev
i2c-proc
joydev
tvmixer
dummy
printer
minix
e una parte del dmesg:
i2c-core.o: i2c core module
i2c-algo-bit.o: i2c bit algorithm module
Linux video capture interface: v1.00
bttv: driver version 0.7.96 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
bttv: Host bridge needs ETBF enabled.
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-proc.o version 2.6.1 (20010825)
i2c-core.o: driver tv card mixer driver registered.
usb.c: registered new driver usblp
printer.c: v0.11: USB Printer Device Class driver
EXT2-fs warning (device ide2(33,7)): ext2_read_super: mounting ext3 filesystem as ext2
EXT2-fs warning (device ide2(33,8)): ext2_read_super: mounting ext3 filesystem as ext2
EXT2-fs warning (device ide2(33,9)): ext2_read_super: mounting ext3 filesystem as ext2
EXT2-fs warning (device ide2(33,12)): ext2_read_super: mounting ext3 filesystem as ext2
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110
mtrr: 0xe8000000,0x2000000 overlaps existing 0xe8000000,0x1000000
bttv: driver version 0.7.96 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
bttv: Host bridge needs ETBF enabled.
bttv: driver version 0.7.96 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
bttv: Host bridge needs ETBF enabled.
bttv: driver version 0.7.96 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
bttv: Host bridge needs ETBF enabled.
Faro' una bella ricerca come si deve su internet, cmq.
Sigh... su linux-pratico sembrava cosi' lineare...
Ma non mi demoralizzero'!
Ciao,
Guldo
Reply to: