Re: Doesn't wodim close disk ?
On Tue, Jan 01, 2008 at 05:19:58PM +0100, Joerg Schilling wrote:
> It seems that you are not interested in a solution for a possible problem.
No I am interested in a solution, but if I am seen as a liar I don't see
this could work ?
> You seem to be only interested in ranting :-(
No, that's not true.
> You have been asked to prove your problem but you ignored this request.....
???
> If you have problems, why don't you prove these problems by sending the output
> from e.g. readcd and cdrecord -minfo on this medium.
I have sent all requested info ???
For example I did send cdrecord -minfo :
cdrecord dev=2,0,0 -minfo
Cdrecord-ProDVD-ProBD-Clone 2.01.01a36 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2007 Jörg Schilling
scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.9'.
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'LITE-ON '
Identifikation : 'DVDRW SH-16A7S '
Revision : 'WS04'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: PACKET SAO LAYER_JUMP
WARNING: Phys disk size 2295104 differs from rzone size 2146272! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 2491711
Mounted media class: DVD
Mounted media type: DVD+R
Disk Is not erasable
data type: standard
disk status: incomplete/appendable
session status: empty
BG format status: none
first track: 1
number of sessions: 2
first track in last sess: 2
last track in last sess: 2
Disk Is unrestricted
Disk type: DVD, HD-DVD or BD
Track Sess Type Start Addr End Addr Size
==============================================
1 1 Data 0 2146271 2146272
2 2 Blank 2148320 2295103 146784
Last session start address: 0
Last session leadout start address: 2146272
Next writable address: 2148320
Remaining writable size: 146784
If you need info from readcd, I provide all you need (in case you belive me
otherwise it's pointless).
For example :
readcd dev=2,0,0 -fulltoc
Read speed: 22160 kB/s (CD 125x, DVD 16x, BD 4x).
Write speed: 22160 kB/s (CD 125x, DVD 16x, BD 4x).
readcd: Input/output error. read toc: scsi sendcmd: no error
CDB: 43 00 02 00 00 00 00 00 04 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s
readcd: Cannot read TOC header
I didn't try again to burn using cdrecord, but with that drive on last
try it only printed those kinds of SCSI errors, which seems to only
appear using cdrecord tools, so I don't think it's my system fault.
Thank,
--
Grégoire FAVRE http://gregoire.favre.googlepages.com http://www.gnupg.org
http://picasaweb.google.com/Gregoire.Favre
Reply to: