Bug#607767: Blank screen on starting X with Dual 2 GHz G5 and X800XT; DRM module not loading for radeon driver
firmware-linux wasn't installed. I installed it and rebooted. Same blank screen, but this time the machine froze up completely. I couldn't ssh into it or ping it.
Grepping dmesg for AGP produces:
[ 0.711199] Linux agpgart interface v0.103
[ 0.711371] agpgart-uninorth 0000:f0:0b.0: Apple U3H chipset
[ 0.716264] agpgart-uninorth 0000:f0:0b.0: configuring for size idx: 64
[ 0.716525] agpgart-uninorth 0000:f0:0b.0: AGP aperture is 256M @ 0x0
Grepping dmesg for DRM produces:
[ 7.787594] [drm] Initialized drm 1.1.0 20060810
[ 8.391594] [drm] radeon defaulting to userspace modesetting.
[ 8.416001] [drm] Initialized radeon 1.32.0 20080528 for 0000:f0:10.0 on minor 0
Attached also are the latest Xorg.0.log, a full output of dmesg, and the latest gdm log.
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-powerpc64 ppc Debian
Current Operating System: Linux G5 2.6.32-5-powerpc64 #1 SMP Fri Dec 10 18:58:21 UTC 2010 ppc64
Kernel command line: root=/dev/sdb3 ro video=ofonly xingle
Build Date: 02 December 2010 01:48:29AM
xorg-server 2:1.7.7-10 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 29 21:50:02 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) [KMS] drm report modesetting isn't supported.
XRANDR name: DVI-1
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
XRANDR name: DVI-0
Connector: DVI-I
CRT1: INTERNAL_DAC1
DFP2: INTERNAL_DVO1
DDC reg: 0x60
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
Unhandled monitor type 0
finished output detect: 0
Unhandled monitor type 0
finished output detect: 1
finished output detect: 2
(EE) RADEON(0): No connected devices found!
finished all detect
(EE) RADEON(0): Using CRT default
Unhandled monitor type 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable TVDAC
disable TVDAC
disable TV
disable TVDAC
init memmap
init common
init crtc1
init pll1
freq: 187000000
best_freq: 187000000
best_feedback_div: 374
best_frac_feedback_div: 0
best_ref_div: 27
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set TVDAC
enable TVDAC
SELinux: Disabled on system, not enabling in X server
(EE) RADEON(0): FIFO timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
[ 0.000000] DART table allocated at: c00000007f000000
[ 0.000000] Using PowerMac machine description
[ 0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12, vmemmap = 24
[ 0.000000] Found initrd at 0xc000000001e00000:0xc000000002817000
[ 0.000000] Found U3 memory controller & host bridge @ 0xf8000000 revision: 0x35
[ 0.000000] Mapped at 0xd000080080000000
[ 0.000000] Found a K2 mac-io controller, rev: 96, mapped at 0xd000080080041000
[ 0.000000] PowerMac motherboard: PowerMac G5
[ 0.000000] DART IOMMU initialized for U3 type chipset
[ 0.000000] bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] Starting Linux PPC64 #1 SMP Fri Dec 10 18:58:21 UTC 2010
[ 0.000000] -----------------------------------------------------
[ 0.000000] ppc64_pft_size = 0x0
[ 0.000000] physicalMemorySize = 0x1c0000000
[ 0.000000] htab_address = 0xc000000238000000
[ 0.000000] htab_hash_mask = 0xfffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-powerpc64 (Debian 2.6.32-29) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Dec 10 18:58:21 UTC 2010
[ 0.000000] [boot]0012 Setup Arch
[ 0.000000] Top of RAM: 0x240000000, Total RAM: 0x1c0000000
[ 0.000000] Memory hole size: 2048MB
[ 0.000000] Found U3-AGP PCI host bridge. Firmware bus number: 240->255
[ 0.000000] PCI host bridge /pci@0,f0000000 ranges:
[ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
[ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0
[ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239
[ 0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges:
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=1074, gen1=1075
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00240000
[ 0.000000] Normal 0x00240000 -> 0x00240000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00080000
[ 0.000000] 0: 0x00100000 -> 0x00240000
[ 0.000000] On node 0 totalpages: 1835008
[ 0.000000] DMA zone: 32256 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 1802752 pages, LIFO batch:31
[ 0.000000] [boot]0015 Setup Done
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c000000000900000 s27296 r0 d30048 u524288
[ 0.000000] pcpu-alloc: s27296 r0 d30048 u524288 alloc=1*1048576
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1802752
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: root=/dev/sdb3 ro video=ofonly single
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] freeing bootmem node 0
[ 0.000000] Memory: 7057100k/7340032k available (7008k kernel code, 282932k reserved, 1228k data, 831k bss, 352k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=256
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f
[ 0.000000] mpic: Initializing for 120 sources
[ 0.000000] irq: irq 56 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 56
[ 0.000000] mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 4 CPUs
[ 0.000000] mpic: ISU size: 124, shift: 7, mask: 7f
[ 0.000000] mpic: Initializing for 124 sources
[ 0.000000] time_init: decrementer frequency = 33.333333 MHz
[ 0.000000] time_init: processor frequency = 2000.000000 MHz
[ 0.000000] clocksource: timebase mult[7800001] shift[22] registered
[ 0.000000] clockevent: decrementer mult[8888887] shift[32] cpu[0]
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000000] irq: irq 22 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 22
[ 0.000000] irq: irq 23 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 23
[ 0.002067] Security Framework initialized
[ 0.002078] SELinux: Disabled at boot.
[ 0.003136] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011280] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015115] Mount-cache hash table entries: 256
[ 0.019121] Initializing cgroup subsys ns
[ 0.019135] Initializing cgroup subsys cpuacct
[ 0.019143] Initializing cgroup subsys devices
[ 0.019149] Initializing cgroup subsys freezer
[ 0.019154] Initializing cgroup subsys net_cls
[ 0.019868] PowerMac SMP probe found 2 cpus
[ 0.019978] irq: irq 0 on host /u3@0,f8000000/mpic@f8040000 mapped to virtual irq 16
[ 0.020001] KeyWest i2c @0xf8001003 irq 16 /u3@0,f8000000/i2c@f8001000
[ 0.020008] channel 0 bus <multibus>
[ 0.020012] channel 1 bus <multibus>
[ 0.020029] irq: irq 26 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 26
[ 0.020047] KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000
[ 0.020054] channel 0 bus <multibus>
[ 0.020065] PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c
[ 0.020071] channel 1 bus <multibus>
[ 0.020075] channel 2 bus <multibus>
[ 0.020136] Processor timebase sync using Pulsar i2c clock
[ 0.020141] mpic: requesting IPIs ...
[ 0.020149] irq: irq 251 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 251
[ 0.020160] irq: irq 252 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 252
[ 0.020169] irq: irq 253 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 253
[ 0.020178] irq: irq 254 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 254
[ 0.022590] Processor 1 found.
[ 0.046697] clockevent: decrementer mult[8888887] shift[32] cpu[1]
[ 0.062638] Brought up 2 CPUs
[ 0.063823] CPU0 attaching sched-domain:
[ 0.063828] domain 0: span 0-1 level CPU
[ 0.063832] groups: 0 1
[ 0.063840] CPU1 attaching sched-domain:
[ 0.063843] domain 0: span 0-1 level CPU
[ 0.063846] groups: 1 0
[ 0.064185] devtmpfs: initialized
[ 0.077826] regulator: core version 0.5
[ 0.077945] NET: Registered protocol family 16
[ 0.077989] IBM eBus Device Driver
[ 0.078276] PPC970/FX/MP performance monitor hardware support registered
[ 0.079872] CPU Hotplug not supported by firmware - disabling.
[ 0.079896] irq: irq 25 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 25
[ 0.079936] irq: irq 47 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 47
[ 0.089967] PCI: Probing PCI hardware
[ 0.090213] pci 0000:f0:10.0: reg 10 32bit mmio pref: [0xa0000000-0xafffffff]
[ 0.090221] pci 0000:f0:10.0: reg 14 io port: [0x400-0x4ff]
[ 0.090229] pci 0000:f0:10.0: reg 18 32bit mmio: [0x90000000-0x9000ffff]
[ 0.090248] pci 0000:f0:10.0: reg 30 32bit mmio pref: [0x90020000-0x9003ffff]
[ 0.090276] pci 0000:f0:10.0: supports D1 D2
[ 0.127078] IOMMU table initialized, virtual merging enabled
[ 0.127125] irq: irq 48 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 48
[ 0.127894] pci 0001:01:07.0: reg 10 32bit mmio: [0x80000000-0x8007ffff]
[ 0.127950] pci 0001:01:08.0: reg 10 32bit mmio: [0x80081000-0x80081fff]
[ 0.128008] pci 0001:01:09.0: reg 10 32bit mmio: [0x80080000-0x80080fff]
[ 0.128058] pci 0001:00:03.0: bridge 32bit mmio: [0x80000000-0x800fffff]
[ 0.128064] pci 0001:00:03.0: bridge 32bit mmio pref: [0x000000-0x0fffff]
[ 0.128090] irq: irq 27 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 27
[ 0.128109] irq: irq 28 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 28
[ 0.128152] pci 0001:02:01.0: reg 10 32bit mmio: [0x80104000-0x80105fff]
[ 0.128195] pci 0001:02:01.0: supports D1 D2
[ 0.128199] pci 0001:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.128209] pci 0001:02:01.0: PME# disabled
[ 0.128258] pci 0001:02:0b.0: reg 10 32bit mmio: [0x80102000-0x80102fff]
[ 0.128303] pci 0001:02:0b.0: supports D1 D2
[ 0.128306] pci 0001:02:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.128314] pci 0001:02:0b.0: PME# disabled
[ 0.128355] pci 0001:02:0b.1: reg 10 32bit mmio: [0x80101000-0x80101fff]
[ 0.128400] pci 0001:02:0b.1: supports D1 D2
[ 0.128403] pci 0001:02:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.128411] pci 0001:02:0b.1: PME# disabled
[ 0.128452] pci 0001:02:0b.2: reg 10 32bit mmio: [0x80100000-0x801000ff]
[ 0.128496] pci 0001:02:0b.2: supports D1 D2
[ 0.128500] pci 0001:02:0b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.128507] pci 0001:02:0b.2: PME# disabled
[ 0.128538] pci 0001:00:04.0: bridge 32bit mmio: [0x80100000-0x801fffff]
[ 0.128544] pci 0001:00:04.0: bridge 32bit mmio pref: [0x000000-0x0fffff]
[ 0.128563] irq: irq 57 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 57
[ 0.128581] irq: irq 63 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 63
[ 0.128634] pci 0001:03:0d.0: reg 10 32bit mmio: [0x80204000-0x80207fff]
[ 0.128697] pci 0001:03:0e.0: reg 10 32bit mmio: [0x80200000-0x80200fff]
[ 0.128738] pci 0001:03:0e.0: supports D1 D2
[ 0.128742] pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.128750] pci 0001:03:0e.0: PME# disabled
[ 0.128774] pci 0001:00:05.0: bridge 32bit mmio: [0x80200000-0x802fffff]
[ 0.128780] pci 0001:00:05.0: bridge 32bit mmio pref: [0x000000-0x0fffff]
[ 0.128796] irq: irq 39 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 39
[ 0.128813] irq: irq 40 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 40
[ 0.128849] pci 0001:04:0f.0: reg 10 32bit mmio: [0x80400000-0x805fffff]
[ 0.128874] pci 0001:04:0f.0: reg 30 32bit mmio pref: [0x80300000-0x803fffff]
[ 0.128900] pci 0001:00:06.0: bridge 32bit mmio: [0x80300000-0x805fffff]
[ 0.128906] pci 0001:00:06.0: bridge 32bit mmio pref: [0x000000-0x0fffff]
[ 0.128923] irq: irq 41 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 41
[ 0.128961] pci 0001:05:0c.0: reg 10 io port: [0x00-0x07]
[ 0.128968] pci 0001:05:0c.0: reg 14 io port: [0x00-0x03]
[ 0.128975] pci 0001:05:0c.0: reg 18 io port: [0x00-0x07]
[ 0.128982] pci 0001:05:0c.0: reg 1c io port: [0x00-0x03]
[ 0.128988] pci 0001:05:0c.0: reg 20 io port: [0x00-0x0f]
[ 0.128996] pci 0001:05:0c.0: reg 24 32bit mmio: [0x80600000-0x80601fff]
[ 0.129033] pci 0001:00:07.0: bridge 32bit mmio: [0x80600000-0x806fffff]
[ 0.129039] pci 0001:00:07.0: bridge 32bit mmio pref: [0x000000-0x0fffff]
[ 0.129058] irq: irq 0 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 17
[ 0.130094] PCI 0000:f0 Cannot reserve Legacy IO [0x10000-0x10fff]
[ 0.130135] pci 0001:00:01.0: PCI bridge, secondary bus 0001:06
[ 0.130143] pci 0001:00:01.0: IO window: disabled
[ 0.130149] pci 0001:00:01.0: MEM window: disabled
[ 0.130155] pci 0001:00:01.0: PREFETCH window: disabled
[ 0.130162] pci 0001:00:02.0: PCI bridge, secondary bus 0001:07
[ 0.130168] pci 0001:00:02.0: IO window: disabled
[ 0.130174] pci 0001:00:02.0: MEM window: disabled
[ 0.130180] pci 0001:00:02.0: PREFETCH window: disabled
[ 0.130187] pci 0001:00:03.0: PCI bridge, secondary bus 0001:01
[ 0.130192] pci 0001:00:03.0: IO window: disabled
[ 0.130199] pci 0001:00:03.0: MEM window: 0x80000000-0x800fffff
[ 0.130206] pci 0001:00:03.0: PREFETCH window: disabled
[ 0.130213] pci 0001:00:04.0: PCI bridge, secondary bus 0001:02
[ 0.130219] pci 0001:00:04.0: IO window: disabled
[ 0.130225] pci 0001:00:04.0: MEM window: 0x80100000-0x801fffff
[ 0.130232] pci 0001:00:04.0: PREFETCH window: disabled
[ 0.130239] pci 0001:00:05.0: PCI bridge, secondary bus 0001:03
[ 0.130245] pci 0001:00:05.0: IO window: disabled
[ 0.130251] pci 0001:00:05.0: MEM window: 0x80200000-0x802fffff
[ 0.130258] pci 0001:00:05.0: PREFETCH window: disabled
[ 0.130265] pci 0001:00:06.0: PCI bridge, secondary bus 0001:04
[ 0.130271] pci 0001:00:06.0: IO window: disabled
[ 0.130277] pci 0001:00:06.0: MEM window: 0x80300000-0x805fffff
[ 0.130284] pci 0001:00:06.0: PREFETCH window: disabled
[ 0.130291] pci 0001:00:07.0: PCI bridge, secondary bus 0001:05
[ 0.130296] pci 0001:00:07.0: IO window: disabled
[ 0.130303] pci 0001:00:07.0: MEM window: 0x80600000-0x806fffff
[ 0.130309] pci 0001:00:07.0: PREFETCH window: disabled
[ 0.130336] pci_bus 0000:f0: resource 0 io: [0x10000-0x80ffff]
[ 0.130340] pci_bus 0000:f0: resource 1 mem: [0xf1000000-0xf1ffffff]
[ 0.130344] pci_bus 0000:f0: resource 2 mem: [0x90000000-0xafffffff]
[ 0.130348] pci_bus 0001:00: resource 0 io: [0x812000-0xc11fff]
[ 0.130352] pci_bus 0001:00: resource 1 mem: [0xfa000000-0xffffffff]
[ 0.130356] pci_bus 0001:00: resource 2 mem: [0x80000000-0x8fffffff]
[ 0.130360] pci_bus 0001:00: resource 3 mem: [0xb0000000-0xefffffff]
[ 0.130364] pci_bus 0001:01: resource 1 mem: [0x80000000-0x800fffff]
[ 0.130368] pci_bus 0001:01: resource 2 mem: [0x0-0xfffff]
[ 0.130372] pci_bus 0001:02: resource 1 mem: [0x80100000-0x801fffff]
[ 0.130376] pci_bus 0001:02: resource 2 mem: [0x0-0xfffff]
[ 0.130380] pci_bus 0001:03: resource 1 mem: [0x80200000-0x802fffff]
[ 0.130384] pci_bus 0001:03: resource 2 mem: [0x0-0xfffff]
[ 0.130388] pci_bus 0001:04: resource 1 mem: [0x80300000-0x805fffff]
[ 0.130392] pci_bus 0001:04: resource 2 mem: [0x0-0xfffff]
[ 0.130396] pci_bus 0001:05: resource 1 mem: [0x80600000-0x806fffff]
[ 0.130400] pci_bus 0001:05: resource 2 mem: [0x0-0xfffff]
[ 0.130403] PCI: Probing PCI hardware done
[ 0.130406] Registering pmac pic with sysfs...
[ 0.133668] bio: create slab <bio-0> at 0
[ 0.133930] vgaarb: device added: PCI:0000:f0:10.0,decodes=io+mem,owns=mem,locks=none
[ 0.133975] vgaarb: loaded
[ 0.134194] Switching to clocksource timebase
[ 0.136926] NET: Registered protocol family 2
[ 0.137362] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.140905] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.148550] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.150045] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.150059] TCP reno registered
[ 0.150272] NET: Registered protocol family 1
[ 0.150314] pci 0001:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.150322] pci 0001:00:01.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.150330] pci 0001:00:02.0: MSI quirk detected; subordinate MSI disabled
[ 0.150337] pci 0001:00:02.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
[ 0.150492] Unpacking initramfs...
[ 0.552221] Freeing initrd memory: 10332k freed
[ 0.553052] nvram_init: Could not find nvram partition for nvram buffered error logging.
[ 0.606335] Registering G5 CPU frequency driver
[ 0.606350] Frequency method: i2c/pfunc, Voltage method: i2c/pfunc
[ 0.606359] Low: 1304 Mhz, High: 2000 Mhz, Cur: 1304 MHz
[ 0.630648] audit: initializing netlink socket (disabled)
[ 0.630675] type=2000 audit(1293741700.588:1): initialized
[ 0.638692] HugeTLB registered 16 MB page size, pre-allocated 0 pages
[ 0.641421] VFS: Disk quotas dquot_6.5.2
[ 0.641559] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.641701] msgmni has been set to 13803
[ 0.642145] alg: No test for stdrng (krng)
[ 0.642274] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.642284] io scheduler noop registered
[ 0.642289] io scheduler anticipatory registered
[ 0.642295] io scheduler deadline registered
[ 0.642356] io scheduler cfq registered (default)
[ 0.642709] Using unsupported 1680x1050 ATY,Tracer_A at a0008000, depth=8, pitch=1792
[ 0.676753] Console: switching to colour frame buffer device 210x65
[ 0.708131] fb0: Open Firmware frame buffer device on /pci@0,f0000000/ATY,TracerParent@10/ATY,Tracer_A@0
[ 0.708463] Using unsupported 640x480 ATY,Tracer_B at a8008000, depth=8, pitch=768
[ 0.708794] fb1: Open Firmware frame buffer device on /pci@0,f0000000/ATY,TracerParent@10/ATY,Tracer_B@1
[ 0.711171] vio_register_driver: driver hvc_console registering
[ 0.711195] HVSI: registered 0 devices
[ 0.711199] Linux agpgart interface v0.103
[ 0.711371] agpgart-uninorth 0000:f0:0b.0: Apple U3H chipset
[ 0.716264] agpgart-uninorth 0000:f0:0b.0: configuring for size idx: 64
[ 0.716525] agpgart-uninorth 0000:f0:0b.0: AGP aperture is 256M @ 0x0
[ 0.716765] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.717206] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 0.717430] ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
[ 0.717697] ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
[ 0.718059] MacIO PCI driver attached to K2 chipset
[ 0.718516] irq: irq 32 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 32
[ 0.718678] irq: irq 5 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 18
[ 0.718692] irq: irq 6 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 19
[ 0.718792] irq: irq 7 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 20
[ 0.718805] irq: irq 8 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 21
[ 0.719016] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.719406] Uniform Multi-Platform E-IDE driver
[ 0.719642] ide-pmac 0001:03:0d.0: enabling device (0014 -> 0016)
[ 1.738332] ide-pmac: Found Apple K2 ATA-6 controller (PCI), bus ID 3, irq 39
[ 1.738560] Probing IDE interface ide0...
[ 2.138698] hda: PIONEER DVD-RW DVR-117D, ATAPI CD/DVD-ROM drive
[ 2.810379] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.810447] hda: UDMA/66 mode selected
[ 2.810657] ide0 at 0xd0000800824f2000-0xd0000800824f2070,0xd0000800824f2160 on irq 39
[ 2.811012] ide-gd driver 1.18
[ 2.811275] mice: PS/2 mouse device common for all mice
[ 2.811532] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 2.812435] TCP cubic registered
[ 2.812764] NET: Registered protocol family 10
[ 2.813798] lo: Disabled Privacy Extensions
[ 2.814558] Mobile IPv6
[ 2.814632] NET: Registered protocol family 17
[ 2.814792] PM: Registered nosave memory: 000000007f000000 - 0000000080000000
[ 2.815177] PM: Resume from disk failed.
[ 2.815198] registered taskstats version 1
[ 2.815816] input: PMU as /devices/virtual/input/input1
[ 2.816006] Registered led device: pmu-led::front
[ 2.816403] rtc-generic rtc-generic: setting system clock to 2010-12-30 20:41:43 UTC (1293741703)
[ 2.816661] Initalizing network drop monitor service
[ 2.817090] Freeing unused kernel memory: 352k freed
[ 2.857466] udev[50]: starting version 164
[ 2.963095] ide-cd driver 5.00
[ 2.990458] usbcore: registered new interface driver usbfs
[ 2.997275] usbcore: registered new interface driver hub
[ 2.999665] ide-cd: hda: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
[ 2.999685] Uniform CD-ROM driver Revision: 3.20
[ 3.003504] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
[ 3.021533] usbcore: registered new device driver usb
[ 3.036074] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.042776] ehci_hcd 0001:02:0b.2: enabling device (0004 -> 0006)
[ 3.049569] ehci_hcd 0001:02:0b.2: EHCI Host Controller
[ 3.056380] ehci_hcd 0001:02:0b.2: new USB bus registered, assigned bus number 1
[ 3.056773] PHY ID: 2062e0, addr: 1
[ 3.059491] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:2c:9d:14
[ 3.059495] eth0: Found BCM5421-K2 PHY
[ 3.063566] firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002)
[ 3.071688] SCSI subsystem initialized
[ 3.101748] libata version 3.00 loaded.
[ 3.111602] sata_svw 0001:05:0c.0: version 2.3
[ 3.111906] scsi0 : sata_svw
[ 3.119832] scsi1 : sata_svw
[ 3.123460] ehci_hcd 0001:02:0b.2: irq 63, io mem 0x80100000
[ 3.135048] scsi2 : sata_svw
[ 3.135386] ehci_hcd 0001:02:0b.2: USB 2.0 started, EHCI 1.00
[ 3.135509] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.135512] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.135515] usb usb1: Product: EHCI Host Controller
[ 3.135518] usb usb1: Manufacturer: Linux 2.6.32-5-powerpc64 ehci_hcd
[ 3.135521] usb usb1: SerialNumber: 0001:02:0b.2
[ 3.135797] usb usb1: configuration #1 chosen from 1 choice
[ 3.135861] hub 1-0:1.0: USB hub found
[ 3.135883] hub 1-0:1.0: 5 ports detected
[ 3.138021] b43-pci-bridge 0001:02:01.0: enabling device (0004 -> 0006)
[ 3.141664] ssb: Sonics Silicon Backplane found on PCI device 0001:02:01.0
[ 3.213264] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.213656] ohci_hcd 0001:01:08.0: enabling device (0000 -> 0002)
[ 3.213687] ohci_hcd 0001:01:08.0: OHCI Host Controller
[ 3.213714] ohci_hcd 0001:01:08.0: new USB bus registered, assigned bus number 2
[ 3.213795] ohci_hcd 0001:01:08.0: irq 27, io mem 0x80081000
[ 3.267516] firewire_ohci: Added fw-ohci device 0001:03:0e.0, OHCI version 1.0
[ 3.275400] scsi3 : sata_svw
[ 3.283530] ata1: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600000 irq 17
[ 3.288919] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.288923] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.288927] usb usb2: Product: OHCI Host Controller
[ 3.288929] usb usb2: Manufacturer: Linux 2.6.32-5-powerpc64 ohci_hcd
[ 3.288932] usb usb2: SerialNumber: 0001:01:08.0
[ 3.289244] usb usb2: configuration #1 chosen from 1 choice
[ 3.289383] hub 2-0:1.0: USB hub found
[ 3.289421] hub 2-0:1.0: 2 ports detected
[ 3.289542] ohci_hcd 0001:01:09.0: enabling device (0000 -> 0002)
[ 3.289572] ohci_hcd 0001:01:09.0: OHCI Host Controller
[ 3.289599] ohci_hcd 0001:01:09.0: new USB bus registered, assigned bus number 3
[ 3.289651] ohci_hcd 0001:01:09.0: irq 28, io mem 0x80080000
[ 3.380431] ata2: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600100 irq 17
[ 3.387850] ata3: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600200 irq 17
[ 3.395123] ata4: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600300 irq 17
[ 3.403264] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.410537] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.417709] usb usb3: Product: OHCI Host Controller
[ 3.424774] usb usb3: Manufacturer: Linux 2.6.32-5-powerpc64 ohci_hcd
[ 3.431889] usb usb3: SerialNumber: 0001:01:09.0
[ 3.439493] usb usb3: configuration #1 chosen from 1 choice
[ 3.446831] hub 3-0:1.0: USB hub found
[ 3.453925] hub 3-0:1.0: 2 ports detected
[ 3.461051] ohci_hcd 0001:02:0b.0: enabling device (0000 -> 0002)
[ 3.468263] ohci_hcd 0001:02:0b.0: OHCI Host Controller
[ 3.475353] ohci_hcd 0001:02:0b.0: new USB bus registered, assigned bus number 4
[ 3.482478] ohci_hcd 0001:02:0b.0: irq 63, io mem 0x80102000
[ 3.562185] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.569226] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.576242] usb usb4: Product: OHCI Host Controller
[ 3.583202] usb usb4: Manufacturer: Linux 2.6.32-5-powerpc64 ohci_hcd
[ 3.590245] usb usb4: SerialNumber: 0001:02:0b.0
[ 3.597526] usb usb4: configuration #1 chosen from 1 choice
[ 3.604651] hub 4-0:1.0: USB hub found
[ 3.611567] hub 4-0:1.0: 3 ports detected
[ 3.614350] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 3.625389] ohci_hcd 0001:02:0b.1: enabling device (0000 -> 0002)
[ 3.632347] ohci_hcd 0001:02:0b.1: OHCI Host Controller
[ 3.639341] ohci_hcd 0001:02:0b.1: new USB bus registered, assigned bus number 5
[ 3.646400] ohci_hcd 0001:02:0b.1: irq 63, io mem 0x80101000
[ 3.726191] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.726381] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.740275] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.740292] ata1.00: ATA-8: ST3500418AS, CC37, max UDMA/133
[ 3.740295] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 3.754879] ata1.00: configured for UDMA/133
[ 3.755154] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC37 PQ: 0 ANSI: 5
[ 3.764223] usb 1-4: New USB device found, idVendor=05ac, idProduct=1006
[ 3.764228] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.764231] usb 1-4: Product: Keyboard Hub
[ 3.764234] usb 1-4: Manufacturer: Apple, Inc.
[ 3.764237] usb 1-4: SerialNumber: 000000000000
[ 3.764400] usb 1-4: configuration #1 chosen from 1 choice
[ 3.765154] hub 1-4:1.0: USB hub found
[ 3.765494] hub 1-4:1.0: 3 ports detected
[ 3.833226] usb usb5: Product: OHCI Host Controller
[ 3.840266] usb usb5: Manufacturer: Linux 2.6.32-5-powerpc64 ohci_hcd
[ 3.847309] usb usb5: SerialNumber: 0001:02:0b.1
[ 3.854443] firewire_core: created device fw0: GUID 000d93fffe2c9d14, S800
[ 3.855560] usb usb5: configuration #1 chosen from 1 choice
[ 3.855698] hub 5-0:1.0: USB hub found
[ 3.855725] hub 5-0:1.0: 2 ports detected
[ 4.074383] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.086795] ata2.00: ATA-8: ST3250310AS, 3.ADA, max UDMA/133
[ 4.093734] ata2.00: 488281250 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.114806] ata2.00: configured for UDMA/133
[ 4.121914] scsi 1:0:0:0: Direct-Access ATA ST3250310AS 3.AD PQ: 0 ANSI: 5
[ 4.310340] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 4.458332] ata3: SATA link down (SStatus 4 SControl 300)
[ 4.554335] usb 4-1: New USB device found, idVendor=0a12, idProduct=0001
[ 4.561642] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.569308] usb 4-1: configuration #1 chosen from 1 choice
[ 4.654467] usb 1-4.2: new low speed USB device using ehci_hcd and address 5
[ 4.761173] usb 1-4.2: New USB device found, idVendor=05ac, idProduct=0220
[ 4.768724] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.776213] usb 1-4.2: Product: Apple Keyboard
[ 4.783646] usb 1-4.2: Manufacturer: Apple, Inc
[ 4.791165] usb 1-4.2: configuration #1 chosen from 1 choice
[ 4.793366] ata4: SATA link down (SStatus 4 SControl 300)
[ 4.813233] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.821036] sd 1:0:0:0: [sdb] 488281250 512-byte logical blocks: (250 GB/232 GiB)
[ 4.829260] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.836754] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.836818] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.836991] sd 0:0:0:0: [sda] Write Protect is off
[ 4.836997] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.837035] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.837333] sda:
[ 4.838164] usbcore: registered new interface driver hiddev
[ 4.838982] usbcore: registered new interface driver usbhid
[ 4.839292] usbhid: v2.6:USB HID core driver
[ 4.848710] [mac] sda1 sda2 sda3 sda4
[ 4.897295] sdb:
[ 4.898585] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.913435] [mac] sdb1 sdb2 sdb3 sdb4
[ 4.924153] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.943451] input: Apple, Inc Apple Keyboard as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-4/1-4.2/1-4.2:1.0/input/input2
[ 4.951817] apple 0003:05AC:0220.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0001:02:0b.2-4.2/input0
[ 4.962728] input: Apple, Inc Apple Keyboard as /devices/pci0001:00/0001:00:04.0/0001:02:0b.2/usb1/1-4/1-4.2/1-4.2:1.1/input/input3
[ 4.971083] apple 0003:05AC:0220.0002: input,hidraw1: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0001:02:0b.2-4.2/input1
[ 5.176443] PowerMac G5 Thermal control driver 1.3
[ 5.185203] Detected fan controls:
[ 5.193540] 0: PWM fan, id 1, location: BACKSIDE,SYS CTRLR FAN
[ 5.201879] 1: RPM fan, id 2, location: DRIVE BAY
[ 5.210089] 2: PWM fan, id 2, location: SLOT,PCI FAN
[ 5.218190] 3: RPM fan, id 3, location: CPU A INTAKE
[ 5.226226] 4: RPM fan, id 4, location: CPU A EXHAUST
[ 5.234166] 5: RPM fan, id 5, location: CPU B INTAKE
[ 5.241997] 6: RPM fan, id 6, location: CPU B EXHAUST
[ 5.288065] PM: Starting manual resume from disk
[ 5.296028] PM: Resume from partition 8:20
[ 5.296031] PM: Checking hibernation image.
[ 5.296345] PM: Error -22 checking image file
[ 5.296348] PM: Resume from disk failed.
[ 5.361301] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 5.369435] EXT3-fs: write access will be enabled during recovery.
[ 5.409779] kjournald starting. Commit interval 5 seconds
[ 5.409810] EXT3-fs: recovery complete.
[ 5.410262] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.455506] eth0: Link is up at 1000 Mbps, full-duplex.
[ 6.796982] udev[290]: starting version 164
[ 7.166814] PowerMac i2c bus pmu 2 registered
[ 7.175707] PowerMac i2c bus pmu 1 registered
[ 7.184391] PowerMac i2c bus mac-io 0 registered
[ 7.193102] PowerMac i2c bus u3 1 registered
[ 7.202687] PowerMac i2c bus u3 0 registered
[ 7.215201] FCU Initialized, RPM fan shift is 3
[ 7.375767] Bluetooth: Core ver 2.15
[ 7.384108] NET: Registered protocol family 31
[ 7.392157] Bluetooth: HCI device and connection manager initialized
[ 7.400274] Bluetooth: HCI socket layer initialized
[ 7.787594] [drm] Initialized drm 1.1.0 20060810
[ 7.805411] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 7.814538] usbcore: registered new interface driver btusb
[ 7.944174] cfg80211: Using static regulatory domain info
[ 7.952446] cfg80211: Regulatory domain: US
[ 7.960558] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.968784] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 7.977010] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.985110] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.993087] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.000900] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 8.008624] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 8.016400] cfg80211: Calling CRDA for country: US
[ 8.391594] [drm] radeon defaulting to userspace modesetting.
[ 8.396900] b43legacy-phy0: Broadcom 4306 WLAN found
[ 8.407741] pci 0000:f0:10.0: enabling device (0006 -> 0007)
[ 8.416001] [drm] Initialized radeon 1.32.0 20080528 for 0000:f0:10.0 on minor 0
[ 8.418354] b43legacy-phy0 debug: Found PHY: Analog 1, Type 2, Revision 1
[ 8.418378] b43legacy-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
[ 8.446453] b43legacy-phy0 debug: Radio initialized
[ 8.578788] phy0: Selected rate control algorithm 'minstrel'
[ 8.579592] irq: irq 30 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 30
[ 8.579631] irq: irq 1 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 24
[ 8.579655] irq: irq 2 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 29
[ 8.580223] Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
[ 8.603461] snd-aoa-fabric-layout: Using PMF GPIOs
[ 8.609870] snd-aoa-codec-tas: found 'deq' node
[ 8.610617] snd-aoa-fabric-layout: can use this codec
[ 8.686792] irq: irq 61 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 61
[ 8.686836] irq: irq 60 on host /ht@0,f2000000/pci@3/mac-io@7/mpic@40000 mapped to virtual irq 60
[ 8.686869] snd-aoa-codec-tas: tas found, addr 0x35 on /ht@0,f2000000/pci@3/mac-io@7/i2c@18000/deq@6a
[ 9.896770] Adding 9935504k swap on /dev/sdb4. Priority:-1 extents:1 across:9935504k
[ 10.066303] EXT3 FS on sdb3, internal journal
[ 10.179749] loop: module loaded
[ 10.272413] snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa.
[ 10.319941] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 10.328954] airport 0.15 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
[ 11.218189] eth0: Link is up at 1000 Mbps, full-duplex.
[ 11.218196] eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 13.411884] fuse init (API version 7.13)
[ 21.906330] eth0: no IPv6 routers present
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-powerpc64 ppc Debian
Current Operating System: Linux G5 2.6.32-5-powerpc64 #1 SMP Fri Dec 10 18:58:21 UTC 2010 ppc64
Kernel command line: root=/dev/sdb3 ro video=ofonly single
Build Date: 02 December 2010 01:48:29AM
xorg-server 2:1.7.7-10 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 29 23:41:38 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x101e8180
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 1
(--) PCI:*(0:240:16:0) 1002:4a48:1002:4a48 ATI Technologies Inc R420 JH [Radeon X800] rev 0, Mem @ 0xa0000000/268435456, 0x90000000/65536, I/O @ 0x00000400/256, BIOS @ 0x????????/131072
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 6.13.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, ATI Radeon HD 4200, ATI Radeon 4100,
ATI Mobility Radeon HD 4200, ATI Mobility Radeon 4100,
ATI Radeon HD 4290, ATI Radeon HD 4290, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
CEDAR
(II) Primary Device is: PCI f0@00:10:0
(II) [KMS] drm report modesetting isn't supported.
(II) RADEON(0): TOTO SAYS 0000000090000000
(II) RADEON(0): MMIO registers at 0x0000000090000000: size 64KB
(II) RADEON(0): PCI bus 240 card 16 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "BusType" "PCIE"
(**) RADEON(0): Option "NoInt10" "True"
(II) RADEON(0): VGAAccess option set to FALSE, VGA module load skipped
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon X800 (R420) JH (AGP)" (ChipID = 0x4a48)
(--) RADEON(0): Linear framebuffer at 0x00000000a0000000
(II) RADEON(0): AGP card detected
(**) RADEON(0): Forced into PCI Express mode
(WW) RADEON(0): Failed to read PCI ROM!
(II) RADEON(0): Attempting to read un-POSTed bios
(WW) RADEON(0): Not an x86 BIOS ROM image, BIOS data will not be used
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:f0:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:f0:10.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.32.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (256 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(WW) RADEON(0): Video BIOS not detected, using default clock settings!
(II) RADEON(0): Probed PLL values: xtal: 27.000000 Mhz, sclk: 472.500000 Mhz, mclk: 499.500000 Mhz
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=50000; xclk=34364
(II) RADEON(0): I2C bus "DVO" initialized.
(II) RADEON(0): I2C device "DVO:RADEON DVO Controller" registered at address 0x70.
(II) RADEON(0): Output DVI-1 using monitor section Monitor0
(II) RADEON(0): I2C bus "DVI-1" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Port0:
XRANDR name: DVI-1
Connector: DVI-I
CRT2: INTERNAL_DAC2
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
(II) RADEON(0): Port1:
XRANDR name: DVI-0
Connector: DVI-I
CRT1: INTERNAL_DAC1
DFP2: INTERNAL_DVO1
DDC reg: 0x60
(II) RADEON(0): Port2:
XRANDR name: S-video
Connector: S-video
TV1: INTERNAL_DAC2
DDC reg: 0x0
(II) RADEON(0): I2C device "DVI-1:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
Unhandled monitor type 0
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
(EE) RADEON(0): No connected devices found!
finished all detect
(II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
(EE) RADEON(0): Using CRT default
(II) RADEON(0): Adding Screen mode: 1680x1050
(II) RADEON(0): Adding Screen mode: 1280x1024
(II) RADEON(0): Adding Screen mode: 1152x864
(II) RADEON(0): Adding Screen mode: 1024x768
(II) RADEON(0): Adding Screen mode: 832x624
(II) RADEON(0): Adding Screen mode: 800x600
(II) RADEON(0): Adding Screen mode: 720x400
(II) RADEON(0): Adding Screen mode: 640x480
(II) RADEON(0): Total number of valid Screen mode(s) added: 8
(II) RADEON(0): Not using default mode "320x175" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "320x200" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "360x200" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "320x240" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "320x240" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "320x240" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "320x240" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "400x300" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "400x300" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "400x300" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "400x300" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "400x300" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1024x768" (interlace mode not supported)
(II) RADEON(0): Not using default mode "512x384" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "512x384" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "512x384" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "512x384" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "512x384" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "576x432" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "640x480" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "640x480" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "640x512" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "640x512" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "640x512" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "800x600" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "800x600" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "800x600" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "896x672" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "928x696" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "960x720" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "416x312" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "576x432" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "576x432" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "576x432" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "576x432" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "576x432" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1152x864" (vrefresh out of range)
(II) RADEON(0): Not using default mode "576x432" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) RADEON(0): Not using default mode "680x384" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "680x384" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "700x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "700x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "700x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "720x450" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "800x512" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) RADEON(0): Not using default mode "840x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "840x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "840x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "840x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1680x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "840x525" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) RADEON(0): Not using default mode "960x540" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
(II) RADEON(0): Not using default mode "960x600" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) RADEON(0): Printing probed modes for output DVI-1
(II) RADEON(0): Modeline "1680x1050"x74.9 187.00 1680 1800 1976 2272 1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) RADEON(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz)
(II) RADEON(0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz)
(II) RADEON(0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz)
(II) RADEON(0): Modeline "1600x1200"x70.0 189.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (87.5 kHz)
(II) RADEON(0): Modeline "1600x1200"x65.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(II) RADEON(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) RADEON(0): Modeline "1680x1050"x69.9 174.00 1680 1800 1976 2272 1050 1053 1059 1096 -hsync +vsync (76.6 kHz)
(II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) RADEON(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz)
(II) RADEON(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz)
(II) RADEON(0): Modeline "1400x1050"x70.0 145.06 1400 1496 1648 1896 1050 1051 1054 1093 -hsync +vsync (76.5 kHz)
(II) RADEON(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
(II) RADEON(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
(II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) RADEON(0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz)
(II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
(II) RADEON(0): Modeline "1152x864"x85.1 121.50 1152 1216 1344 1568 864 865 868 911 +hsync -vsync (77.5 kHz)
(II) RADEON(0): Modeline "1152x864"x85.0 119.65 1152 1224 1352 1552 864 865 868 907 -hsync +vsync (77.1 kHz)
(II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.6 kHz)
(II) RADEON(0): Modeline "1152x864"x70.0 96.77 1152 1224 1344 1536 864 865 868 900 -hsync +vsync (63.0 kHz)
(II) RADEON(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz)
(II) RADEON(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
(II) RADEON(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) RADEON(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
(II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "832x624"x59.8 41.00 832 864 944 1056 624 627 631 649 -hsync +vsync (38.8 kHz)
(II) RADEON(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) RADEON(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
(II) RADEON(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) RADEON(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
(II) RADEON(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
(II) RADEON(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): EDID for output DVI-0
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): EDID for output S-video
(II) RADEON(0): Output DVI-1 connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using user preference for initial modes
(II) RADEON(0): Output DVI-1 using initial mode 1680x1050
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using EXA acceleration architecture
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1920
(II) RADEON(0): Cannot access BIOS or it is not valid.
If your card is TV-in capable you will need to specify options RageTheatreCrystal, RageTheatreTunerPort,
RageTheatreSVideoPort and TunerType in /etc/X11/xorg.conf.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit a0000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable TVDAC
(II) RADEON(0): Dynamic Power Management Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x10000000
(II) RADEON(0): MC_FB_LOCATION : 0xafffa000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262112 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00e10000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00e14000
(II) RADEON(0): Will use 14400 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 32 kb for PCI GART at offset 0x0fff8000
(II) RADEON(0): Will use 14400 kb for back buffer at offset 0x00e18000
(II) RADEON(0): Will use 14400 kb for depth buffer at offset 0x01c28000
(II) RADEON(0): Will use 108544 kb for textures at offset 0x02a38000
(II) RADEON(0): Will use 110336 kb for X Server offscreen at offset 0x09438000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:f0:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:f0:10.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xa0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0x000d2c4f
(II) RADEON(0): [pci] ring handle = 0x1a000000
(II) RADEON(0): [pci] Ring mapped at 0xe7b48000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0x29fff000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xf7c8a000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0x1a001000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xe7948000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0x1a002000
(II) RADEON(0): [pci] GART Texture map mapped at 0xe5cc8000
(II) RADEON(0): [drm] register handle = 0x2fffb000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xafffa000 0x0fff0000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0x19fff000 at 0xf7c8b000
(II) RADEON(0): [drm] Closed DRM master.
(WW) RADEON(0): Direct rendering disabled
(II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(II) RADEON(0): num quad-pipes is 4
(II) EXA(0): Offscreen pixmap area of 112984064 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
disable TVDAC
disable TV
disable TVDAC
init memmap
init common
init crtc1
init pll1
freq: 187000000
best_freq: 187000000
best_feedback_div: 374
best_frac_feedback_div: 0
best_ref_div: 27
best_post_div: 2
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xafffa000 0xafffa000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set TVDAC
enable TVDAC
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 444 x 277
(II) config/udev: Adding input device Apple, Inc Apple Keyboard (/dev/input/event2)
(**) Apple, Inc Apple Keyboard: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Apple, Inc Apple Keyboard: always reports core events
(**) Apple, Inc Apple Keyboard: Device: "/dev/input/event2"
(II) Apple, Inc Apple Keyboard: Found keys
(II) Apple, Inc Apple Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Apple, Inc Apple Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Apple, Inc Apple Keyboard (/dev/input/event3)
(**) Apple, Inc Apple Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Apple, Inc Apple Keyboard: always reports core events
(**) Apple, Inc Apple Keyboard: Device: "/dev/input/event3"
(II) Apple, Inc Apple Keyboard: Found keys
(II) Apple, Inc Apple Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Apple, Inc Apple Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PMU (/dev/input/event1)
(**) PMU: Applying InputClass "evdev keyboard catchall"
(**) PMU: always reports core events
(**) PMU: Device: "/dev/input/event1"
(II) PMU: Found keys
(II) PMU: Configuring as keyboard
(II) XINPUT: Adding extended input device "PMU" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): Idle timed out, resetting engine...
On Dec 30, 2010, at 3:17 AM, Michel Dänzer wrote:
> On Don, 2010-12-30 at 00:28 -0500, dpickett wrote:
>> Installed Debian Squeeze. Looks like things are somewhat better.
>>
>> For the first reboot after install I got an enlarged mouse cursor in
>> the middle of a blank screen. I then copied over the last xorg_conf
>> file and rebooted. X started, I got a blank screen, and then the
>> monitor went to sleep. The machine is no longer locking up, however:
>> an ssh connection from another machine shows the Linux machine is
>> alive and well.
>>
>> Attached are two Xorg.0.log files. The one titled "Xorglog_mint_clean"
>> is from the first reboot after the clean install, with no xorg_conf
>> file. The one titled "xorglog_mint_1.txt" is using the latest
>> xorg_conf file, which forces the machine to use PCI instead of AGP.
>
> Both log files show the DRI failing to get enabled again, resulting in
> the original problem. Is the firmware-linux package installed? If yes,
> please provide at least any AGP/DRM related messages from dmesg.
>
>
> --
> Earthling Michel Dänzer | http://www.vmware.com
> Libre software enthusiast | Debian, X and DRI developer
______________
www.dpickett.com
Reply to: