RE: Live recording
FYI the "tip, ring and sleeve" notation derives from the 3-wire connection that connects old land-lines to the telephone central office in the user's area.
From: Jeremy Nicoll [mailto:email@example.com]
Sent: Thursday, August 03, 2017 10:07 AM
Subject: Re: Live recording
On Thu, 3 Aug 2017, at 16:45, Rodolfo Medina wrote:
> Thanks. But all my 4 microphones terminates in 3.5mm, and the splitter I
> talking about is two 3.5mm female and one 3.5mm male. Is this you
No. Look at: https://i.ytimg.com/vi/x1q9MXvjDlM/maxresdefault.jpg
That should show you pictures of two, three and four contact mini jack
A two-contact one is used for one audio channel (the two contacts being
signal & ground).
A three contact one is used for two channels (signal 1, signal 2, and
A four contact one is for three channels (eg on a stereo headset which
has L & R speakers,
but a single mono microphone) - the four contacts being L, R, mic and
(The tip/ring/sleeve terms that someone else mentioned are names for the
on a three-contact jack plug.)
Which type of plugs do you have on your mics?
On 'professional' equipment it gets a bit more complicated when three
used for a single audio channel, being the +ve half of a waveform, the
-ve half, and ground.
(These are known as 'balanced' connections, and typically use either XLR
plugs & sockets
or 3-contact 6.25mm audio jacks.)
Jeremy Nicoll - my opinions are my own.