Re: Still unable to get external monitor wotking on Debian 6 - was Re: Unable to install nVidia driver on Debian 6 LTS - was - Re: How to boot without GUI
On 19/06/2015, Petter Adsen <petter@synth.no> wrote:
>> > Copies of Xorg.0.log (on both Wheezy and Ubuntu) would also be
>> > helpful, just to see what your system detects, and how they differ.
>> >
>>
>> "
>> -Ubuntu-12-04LTS:~$ cat Xorg.0.log
>> cat: Xorg.0.log: No such file or directory
>> "
>
> If you read the top of my previous post you would have seen the
> full path to that file.
>
Sorry - I had read the whole of the post, and had tried to respond to
it in modularised progressive steps, and when I got down to that part,
I had forgotten the content of the first paragraph.
See below for Ubuntu 12.04
--
Bret Busby
Armadale
West Australia
..............
"So once you do know what the question actually is,
you'll know what the answer means."
- Deep Thought,
Chapter 28 of Book 1 of
"The Hitchhiker's Guide to the Galaxy:
A Trilogy In Four Parts",
written by Douglas Adams,
published by Pan Books, 1992
....................................................
'
-Ubuntu-12-04LTS:~$ cat /var/log/Xorg.0.log
[ 24.305]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 24.306] X Protocol Version 11, Revision 0
[ 24.306] Build Operating System: Linux 2.6.42-75-generic x86_64 Ubuntu
[ 24.306] Current Operating System: Linux
bret-Aspire-V3-772-Ubuntu-12-04LTS 3.13.0-54-generic
#91~precise1-Ubuntu SMP Wed May 27 10:48:29 UTC 2015 x86_64
[ 24.306] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-3.13.0-54-generic
root=UUID=50c16b74-e83e-4900-a870-19a1bcc9304b ro quiet splash
[ 24.306] Build Date: 12 February 2015 03:37:52PM
[ 24.306] xorg-server 2:1.15.1-0ubuntu2~precise5 (For technical
support please see http://www.ubuntu.com/support)
[ 24.306] Current version of pixman: 0.30.2
[ 24.306] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.306] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.306] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 19
15:58:42 2015
[ 24.597] (==) Using config file: "/etc/X11/xorg.conf"
[ 24.597] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24.688] (==) No Layout section. Using the first Screen section.
[ 24.688] (==) No screen section available. Using defaults.
[ 24.688] (**) |-->Screen "Default Screen Section" (0)
[ 24.688] (**) | |-->Monitor "<default monitor>"
[ 24.688] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 24.688] (==) Automatically adding devices
[ 24.688] (==) Automatically enabling devices
[ 24.688] (==) Automatically adding GPU devices
[ 25.445] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 25.445] Entry deleted from font path.
[ 25.445] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 25.445] Entry deleted from font path.
[ 25.445] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 25.445] Entry deleted from font path.
[ 25.471] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 25.471] Entry deleted from font path.
[ 25.471] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 25.471] Entry deleted from font path.
[ 25.471] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 25.471] (==) ModulePath set to
"/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 25.471] (II) The server relies on udev to provide the list of
input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 25.494] (II) Loader magic: 0x7f0af8cb6c20
[ 25.494] (II) Module ABI versions:
[ 25.494] X.Org ANSI C Emulation: 0.4
[ 25.494] X.Org Video Driver: 15.0
[ 25.494] X.Org XInput driver : 20.0
[ 25.494] X.Org Server Extension : 8.0
[ 25.494] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 25.494] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 25.495] (--) PCI:*(0:0:2:0) 8086:0416:1025:0781 rev 6, Mem @
0xd3000000/4194304, 0xc0000000/268435456, I/O @ 0x00005000/64
[ 25.495] (--) PCI: (0:1:0:0) 10de:0fe4:1025:0781 rev 161, Mem @
0xd2000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @
0x00004000/128, BIOS @ 0x????????/524288
[ 25.540] Initializing built-in extension Generic Event Extension
[ 25.540] Initializing built-in extension SHAPE
[ 25.540] Initializing built-in extension MIT-SHM
[ 25.540] Initializing built-in extension XInputExtension
[ 25.540] Initializing built-in extension XTEST
[ 25.540] Initializing built-in extension BIG-REQUESTS
[ 25.540] Initializing built-in extension SYNC
[ 25.540] Initializing built-in extension XKEYBOARD
[ 25.540] Initializing built-in extension XC-MISC
[ 25.540] Initializing built-in extension SECURITY
[ 25.540] Initializing built-in extension XINERAMA
[ 25.540] Initializing built-in extension XFIXES
[ 25.540] Initializing built-in extension RENDER
[ 25.540] Initializing built-in extension RANDR
[ 25.540] Initializing built-in extension COMPOSITE
[ 25.540] Initializing built-in extension DAMAGE
[ 25.540] Initializing built-in extension MIT-SCREEN-SAVER
[ 25.540] Initializing built-in extension DOUBLE-BUFFER
[ 25.540] Initializing built-in extension RECORD
[ 25.540] Initializing built-in extension DPMS
[ 25.540] Initializing built-in extension X-Resource
[ 25.540] Initializing built-in extension XVideo
[ 25.540] Initializing built-in extension XVideo-MotionCompensation
[ 25.540] Initializing built-in extension XFree86-VidModeExtension
[ 25.540] Initializing built-in extension XFree86-DGA
[ 25.540] Initializing built-in extension XFree86-DRI
[ 25.540] Initializing built-in extension DRI2
[ 25.540] (WW) "glamoregl" will not be loaded unless you've
specified it to be loaded elsewhere.
[ 25.540] (II) "glx" will be loaded by default.
[ 25.540] (II) LoadModule: "glx"
[ 25.590] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[ 28.547] (II) Module glx: vendor="NVIDIA Corporation"
[ 28.547] compiled for 4.0.2, module version = 1.0.0
[ 28.547] Module class: X.Org Server Extension
[ 28.547] (II) NVIDIA GLX Module 331.113 Mon Dec 1 20:24:35 PST 2014
[ 28.562] Loading extension GLX
[ 28.562] (==) Matched intel as autoconfigured driver 0
[ 28.562] (==) Matched nvidia as autoconfigured driver 1
[ 28.562] (==) Matched nouveau as autoconfigured driver 2
[ 28.562] (==) Matched intel as autoconfigured driver 3
[ 28.562] (==) Matched modesetting as autoconfigured driver 4
[ 28.562] (==) Matched fbdev as autoconfigured driver 5
[ 28.562] (==) Matched vesa as autoconfigured driver 6
[ 28.562] (==) Assigned the driver to the xf86ConfigLayout
[ 28.562] (II) LoadModule: "intel"
[ 28.568] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 28.593] (II) Module intel: vendor="X.Org Foundation"
[ 28.593] compiled for 1.15.1, module version = 2.99.910
[ 28.593] Module class: X.Org Video Driver
[ 28.593] ABI class: X.Org Video Driver, version 15.0
[ 28.593] (II) LoadModule: "nvidia"
[ 28.593] (II) Loading
/usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[ 28.716] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 28.716] compiled for 4.0.2, module version = 1.0.0
[ 28.716] Module class: X.Org Video Driver
[ 28.729] (II) LoadModule: "nouveau"
[ 28.729] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 28.754] (II) Module nouveau: vendor="X.Org Foundation"
[ 28.754] compiled for 1.15.1, module version = 1.0.10
[ 28.754] Module class: X.Org Video Driver
[ 28.754] ABI class: X.Org Video Driver, version 15.0
[ 28.754] (II) LoadModule: "modesetting"
[ 28.754] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 28.763] (II) Module modesetting: vendor="X.Org Foundation"
[ 28.763] compiled for 1.15.1, module version = 0.8.1
[ 28.763] Module class: X.Org Video Driver
[ 28.763] ABI class: X.Org Video Driver, version 15.0
[ 28.763] (II) LoadModule: "fbdev"
[ 28.763] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 28.767] (II) Module fbdev: vendor="X.Org Foundation"
[ 28.767] compiled for 1.15.1, module version = 0.4.4
[ 28.767] Module class: X.Org Video Driver
[ 28.767] ABI class: X.Org Video Driver, version 15.0
[ 28.767] (II) LoadModule: "vesa"
[ 28.768] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 28.778] (II) Module vesa: vendor="X.Org Foundation"
[ 28.778] compiled for 1.15.1, module version = 2.3.3
[ 28.778] Module class: X.Org Video Driver
[ 28.778] ABI class: X.Org Video Driver, version 15.0
[ 28.778] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 28.778] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 28.778] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 28.778] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics:
5200, 6200, P6300
[ 28.778] (II) NVIDIA dlloader X Driver 331.113 Mon Dec 1
20:01:51 PST 2014
[ 28.778] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 28.779] (II) NOUVEAU driver Date: Thu Nov 7 14:56:48 2013 +1000
[ 28.779] (II) NOUVEAU driver for NVIDIA chipset families :
[ 28.779] RIVA TNT (NV04)
[ 28.779] RIVA TNT2 (NV05)
[ 28.779] GeForce 256 (NV10)
[ 28.779] GeForce 2 (NV11, NV15)
[ 28.779] GeForce 4MX (NV17, NV18)
[ 28.779] GeForce 3 (NV20)
[ 28.779] GeForce 4Ti (NV25, NV28)
[ 28.779] GeForce FX (NV3x)
[ 28.779] GeForce 6 (NV4x)
[ 28.779] GeForce 7 (G7x)
[ 28.779] GeForce 8 (G8x)
[ 28.779] GeForce GTX 200 (NVA0)
[ 28.779] GeForce GTX 400 (NVC0)
[ 28.779] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 28.779] (II) FBDEV: driver for framebuffer: fbdev
[ 28.779] (II) VESA: driver for VESA chipsets: vesa
[ 28.779] (++) using VT number 7
[ 28.780] (II) intel(0): SNA compiled:
xserver-xorg-video-intel-lts-trusty 2:2.99.910-0ubuntu1.3~precise1
(Timo Aaltonen <tjaalton@debian.org>)
[ 28.794] (EE) [drm] KMS not enabled
[ 28.794] (WW) Falling back to old probe method for modesetting
[ 28.794] (WW) Falling back to old probe method for fbdev
[ 28.794] (II) Loading sub module "fbdevhw"
[ 28.794] (II) LoadModule: "fbdevhw"
[ 28.794] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 28.809] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 28.809] compiled for 1.15.1, module version = 0.0.2
[ 28.809] ABI class: X.Org Video Driver, version 15.0
[ 28.809] (WW) Falling back to old probe method for vesa
[ 28.810] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD
Graphics 4600
[ 28.810] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1,
sse4.2, avx, avx2
[ 28.810] (II) intel(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 28.810] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 28.810] (==) intel(0): RGB weight 888
[ 28.810] (==) intel(0): Default visual is TrueColor
[ 28.810] (**) intel(0): Framebuffer tiled
[ 28.810] (**) intel(0): Pixmaps tiled
[ 28.810] (**) intel(0): "Tear free" disabled
[ 28.810] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 28.810] (II) intel(0): Output eDP1 has no monitor section
[ 28.810] (--) intel(0): found backlight control interface
acpi_video0 (type 'firmware')
[ 28.810] (II) intel(0): Output VGA1 has no monitor section
[ 28.810] (II) intel(0): Output HDMI1 has no monitor section
[ 28.810] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 28.810] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 28.810] (--) intel(0): Output HDMI1 using initial mode 1920x1080 on pipe 1
[ 28.810] (==) intel(0): DPI set to (96, 96)
[ 28.810] (II) Loading sub module "dri2"
[ 28.810] (II) LoadModule: "dri2"
[ 28.810] (II) Module "dri2" already built-in
[ 28.810] (II) UnloadModule: "nvidia"
[ 28.810] (II) Unloading nvidia
[ 28.810] (II) UnloadModule: "fbdev"
[ 28.810] (II) Unloading fbdev
[ 28.810] (II) UnloadSubModule: "fbdevhw"
[ 28.810] (II) Unloading fbdevhw
[ 28.810] (II) UnloadModule: "vesa"
[ 28.811] (II) Unloading vesa
[ 28.811] (==) Depth 24 pixmap format is 32 bpp
[ 28.855] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 28.855] (==) intel(0): Backing store enabled
[ 28.855] (==) intel(0): Silken mouse enabled
[ 28.855] (II) intel(0): HW Cursor enabled
[ 28.855] (II) intel(0): RandR 1.2 enabled, ignore the following
RandR disabled message.
[ 28.857] (==) intel(0): DPMS enabled
[ 28.857] (II) intel(0): [DRI2] Setup complete
[ 28.857] (II) intel(0): [DRI2] DRI driver: i965
[ 28.857] (II) intel(0): [DRI2] VDPAU driver: i965
[ 28.857] (II) intel(0): direct rendering: DRI2 Enabled
[ 28.857] (==) intel(0): hotplug detection: "enabled"
[ 28.857] (--) RandR disabled
[ 28.871] (EE) Failed to initialize GLX extension (Compatible
NVIDIA X driver not found)
[ 28.875] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1
using pipe 0, position (0, 0), rotation normal, reflection none
[ 28.896] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI1
using pipe 1, position (0, 0), rotation normal, reflection none
[ 28.912] (II) intel(0): Setting screen physical size to 508 x 285
[ 29.035] (II) XKB: reuse xkmfile
/var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 29.048] (II) config/udev: Adding input device Power Button
(/dev/input/event3)
[ 29.048] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.048] (II) LoadModule: "evdev"
[ 29.049] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 29.070] (II) Module evdev: vendor="X.Org Foundation"
[ 29.070] compiled for 1.15.1, module version = 2.8.2
[ 29.070] Module class: X.Org XInput Driver
[ 29.070] ABI class: X.Org XInput driver, version 20.0
[ 29.070] (II) Using input driver 'evdev' for 'Power Button'
[ 29.070] (**) Power Button: always reports core events
[ 29.070] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 29.070] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 29.070] (--) evdev: Power Button: Found keys
[ 29.070] (II) evdev: Power Button: Configuring as keyboard
[ 29.070] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 29.070] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[ 29.070] (**) Option "xkb_rules" "evdev"
[ 29.070] (**) Option "xkb_model" "pc105"
[ 29.070] (**) Option "xkb_layout" "us"
[ 29.071] (II) config/udev: Adding input device Video Bus
(/dev/input/event11)
[ 29.071] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 29.071] (II) Using input driver 'evdev' for 'Video Bus'
[ 29.071] (**) Video Bus: always reports core events
[ 29.071] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 29.071] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 29.071] (--) evdev: Video Bus: Found keys
[ 29.071] (II) evdev: Video Bus: Configuring as keyboard
[ 29.071] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input18/event11"
[ 29.071] (II) XINPUT: Adding extended input device "Video Bus"
(type: KEYBOARD, id 7)
[ 29.071] (**) Option "xkb_rules" "evdev"
[ 29.071] (**) Option "xkb_model" "pc105"
[ 29.071] (**) Option "xkb_layout" "us"
[ 29.071] (II) config/udev: Adding input device Power Button
(/dev/input/event0)
[ 29.071] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.071] (II) Using input driver 'evdev' for 'Power Button'
[ 29.071] (**) Power Button: always reports core events
[ 29.071] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 29.071] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 29.071] (--) evdev: Power Button: Found keys
[ 29.071] (II) evdev: Power Button: Configuring as keyboard
[ 29.071] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input0/event0"
[ 29.071] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 8)
[ 29.071] (**) Option "xkb_rules" "evdev"
[ 29.071] (**) Option "xkb_model" "pc105"
[ 29.071] (**) Option "xkb_layout" "us"
[ 29.071] (II) config/udev: Adding input device Sleep Button
(/dev/input/event1)
[ 29.071] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 29.071] (II) Using input driver 'evdev' for 'Sleep Button'
[ 29.071] (**) Sleep Button: always reports core events
[ 29.071] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 29.071] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 29.071] (--) evdev: Sleep Button: Found keys
[ 29.071] (II) evdev: Sleep Button: Configuring as keyboard
[ 29.071] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0E:00/input/input1/event1"
[ 29.071] (II) XINPUT: Adding extended input device "Sleep Button"
(type: KEYBOARD, id 9)
[ 29.071] (**) Option "xkb_rules" "evdev"
[ 29.071] (**) Option "xkb_model" "pc105"
[ 29.071] (**) Option "xkb_layout" "us"
[ 29.072] (II) config/udev: Adding input device Video Bus
(/dev/input/event10)
[ 29.072] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 29.072] (II) Using input driver 'evdev' for 'Video Bus'
[ 29.072] (**) Video Bus: always reports core events
[ 29.072] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 29.072] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 29.072] (--) evdev: Video Bus: Found keys
[ 29.072] (II) evdev: Video Bus: Configuring as keyboard
[ 29.072] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3e/LNXVIDEO:00/input/input17/event10"
[ 29.072] (II) XINPUT: Adding extended input device "Video Bus"
(type: KEYBOARD, id 10)
[ 29.072] (**) Option "xkb_rules" "evdev"
[ 29.072] (**) Option "xkb_model" "pc105"
[ 29.072] (**) Option "xkb_layout" "us"
[ 29.072] (II) config/udev: Adding input device Lid Switch
(/dev/input/event2)
[ 29.072] (II) No input driver specified, ignoring this device.
[ 29.072] (II) This device may have been added with another device file.
[ 29.072] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 29.072] (II) config/udev: Ignoring already known drm device
(/dev/dri/card1)
[ 29.072] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 29.072] (II) config/udev: Ignoring already known drm device
(/dev/dri/card0)
[ 29.072] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=3 (/dev/input/event14)
[ 29.072] (II) No input driver specified, ignoring this device.
[ 29.072] (II) This device may have been added with another device file.
[ 29.072] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=7 (/dev/input/event13)
[ 29.072] (II) No input driver specified, ignoring this device.
[ 29.072] (II) This device may have been added with another device file.
[ 29.073] (II) config/udev: Adding input device HDA Intel HDMI
HDMI/DP,pcm=8 (/dev/input/event12)
[ 29.073] (II) No input driver specified, ignoring this device.
[ 29.073] (II) This device may have been added with another device file.
[ 29.073] (II) config/udev: Adding input device Logitech USB-PS/2
Optical Mouse (/dev/input/event5)
[ 29.073] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass
"evdev pointer catchall"
[ 29.073] (II) Using input driver 'evdev' for 'Logitech USB-PS/2
Optical Mouse'
[ 29.073] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 29.073] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device:
"/dev/input/event5"
[ 29.073] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d
Product 0xc03e
[ 29.073] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[ 29.073] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 29.073] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 29.073] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and
y relative axes
[ 29.073] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 29.073] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding
scrollwheel support
[ 29.073] (**) evdev: Logitech USB-PS/2 Optical Mouse:
YAxisMapping: buttons 4 and 5
[ 29.073] (**) evdev: Logitech USB-PS/2 Optical Mouse:
EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout:
200
[ 29.073] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input9/event5"
[ 29.073] (II) XINPUT: Adding extended input device "Logitech
USB-PS/2 Optical Mouse" (type: MOUSE, id 11)
[ 29.073] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized
for relative axes.
[ 29.073] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping
acceleration scheme 1
[ 29.073] (**) Logitech USB-PS/2 Optical Mouse: (accel)
acceleration profile 0
[ 29.073] (**) Logitech USB-PS/2 Optical Mouse: (accel)
acceleration factor: 2.000
[ 29.073] (**) Logitech USB-PS/2 Optical Mouse: (accel)
acceleration threshold: 4
[ 29.073] (II) config/udev: Adding input device Logitech USB-PS/2
Optical Mouse (/dev/input/mouse0)
[ 29.073] (II) No input driver specified, ignoring this device.
[ 29.073] (II) This device may have been added with another device file.
[ 29.073] (II) config/udev: Adding input device HD WebCam (/dev/input/event9)
[ 29.073] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 29.073] (II) Using input driver 'evdev' for 'HD WebCam'
[ 29.073] (**) HD WebCam: always reports core events
[ 29.073] (**) evdev: HD WebCam: Device: "/dev/input/event9"
[ 29.073] (--) evdev: HD WebCam: Vendor 0x1bcf Product 0x2c55
[ 29.073] (--) evdev: HD WebCam: Found keys
[ 29.073] (II) evdev: HD WebCam: Configuring as keyboard
[ 29.073] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input16/event9"
[ 29.073] (II) XINPUT: Adding extended input device "HD WebCam"
(type: KEYBOARD, id 12)
[ 29.073] (**) Option "xkb_rules" "evdev"
[ 29.073] (**) Option "xkb_model" "pc105"
[ 29.073] (**) Option "xkb_layout" "us"
[ 29.074] (II) config/udev: Adding input device HDA Intel PCH Mic
(/dev/input/event16)
[ 29.074] (II) No input driver specified, ignoring this device.
[ 29.074] (II) This device may have been added with another device file.
[ 29.074] (II) config/udev: Adding input device HDA Intel PCH
Headphone (/dev/input/event15)
[ 29.074] (II) No input driver specified, ignoring this device.
[ 29.074] (II) This device may have been added with another device file.
[ 29.074] (II) config/udev: Adding input device AT Translated Set 2
keyboard (/dev/input/event4)
[ 29.074] (**) AT Translated Set 2 keyboard: Applying InputClass
"evdev keyboard catchall"
[ 29.074] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 29.074] (**) AT Translated Set 2 keyboard: always reports core events
[ 29.074] (**) evdev: AT Translated Set 2 keyboard: Device:
"/dev/input/event4"
[ 29.074] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 29.074] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 29.074] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 29.074] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 29.074] (II) XINPUT: Adding extended input device "AT Translated
Set 2 keyboard" (type: KEYBOARD, id 13)
[ 29.074] (**) Option "xkb_rules" "evdev"
[ 29.074] (**) Option "xkb_model" "pc105"
[ 29.074] (**) Option "xkb_layout" "us"
[ 29.074] (II) config/udev: Adding input device SynPS/2 Synaptics
TouchPad (/dev/input/event8)
[ 29.074] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"evdev touchpad catchall"
[ 29.074] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"touchpad catchall"
[ 29.074] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"Default clickpad buttons"
[ 29.074] (II) LoadModule: "synaptics"
[ 29.074] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 29.086] (II) Module synaptics: vendor="X.Org Foundation"
[ 29.086] compiled for 1.15.1, module version = 1.7.4
[ 29.086] Module class: X.Org XInput Driver
[ 29.086] ABI class: X.Org XInput driver, version 20.0
[ 29.086] (II) Using input driver 'synaptics' for 'SynPS/2
Synaptics TouchPad'
[ 29.086] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 29.086] (**) Option "Device" "/dev/input/event8"
[ 29.100] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 29.100] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range
1278 - 5662 (res 42)
[ 29.100] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range
1198 - 4656 (res 46)
[ 29.100] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 29.100] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width
range 0 - 15
[ 29.100] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left
double triple
[ 29.100] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 29.100] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 29.100] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 29.100] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 29.112] (**) Option "config_info"
"udev:/sys/devices/platform/i8042/serio4/input/input15/event8"
[ 29.112] (II) XINPUT: Adding extended input device "SynPS/2
Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 29.112] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)
MinSpeed is now constant deceleration 2.5
[ 29.112] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)
MaxSpeed is now 1.75
[ 29.112] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)
AccelFactor is now 0.036
[ 29.112] (**) SynPS/2 Synaptics TouchPad: (accel) keeping
acceleration scheme 1
[ 29.112] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 29.112] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 29.112] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 29.112] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 29.112] (II) config/udev: Adding input device SynPS/2 Synaptics
TouchPad (/dev/input/mouse1)
[ 29.112] (**) SynPS/2 Synaptics TouchPad: Ignoring device from
InputClass "touchpad ignore duplicates"
[ 29.113] (II) config/udev: Adding input device Acer WMI hotkeys
(/dev/input/event6)
[ 29.113] (**) Acer WMI hotkeys: Applying InputClass "evdev
keyboard catchall"
[ 29.113] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 29.113] (**) Acer WMI hotkeys: always reports core events
[ 29.113] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event6"
[ 29.113] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 29.113] (--) evdev: Acer WMI hotkeys: Found keys
[ 29.113] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 29.113] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input10/event6"
[ 29.113] (II) XINPUT: Adding extended input device "Acer WMI
hotkeys" (type: KEYBOARD, id 15)
[ 29.113] (**) Option "xkb_rules" "evdev"
[ 29.113] (**) Option "xkb_model" "pc105"
[ 29.113] (**) Option "xkb_layout" "us"
[ 29.113] (II) config/udev: Adding input device Acer BMA150
accelerometer (/dev/input/event7)
[ 29.113] (II) No input driver specified, ignoring this device.
[ 29.113] (II) This device may have been added with another device file.
[ 29.114] (II) config/udev: Adding input device Acer BMA150
accelerometer (/dev/input/js0)
[ 29.114] (II) No input driver specified, ignoring this device.
[ 29.114] (II) This device may have been added with another device file.
[ 29.286] (II) intel(0): EDID vendor "DEL", prod id 61469
[ 29.286] (II) intel(0): Using EDID range info for horizontal sync
[ 29.286] (II) intel(0): Using EDID range info for vertical refresh
[ 29.286] (II) intel(0): Printing DDC gathered Modelines:
[ 29.286] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920
2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 29.286] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920
2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz
e)
[ 29.286] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390
1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 29.286] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736
798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 29.286] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 29.286] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 29.286] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 29.286] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 29.286] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 29.286] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 29.286] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 29.286] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 29.286] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 29.286] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 29.286] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920
2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 29.286] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732
796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 29.286] (II) intel(0): Modeline "1440x240"x0.0 27.00 1440 1478
1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 29.286] (II) intel(0): Modeline "1440x288"x0.0 27.00 1440 1464
1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 29.286] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720
1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 29.286] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920
2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 29.286] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920
2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz
e)
[ 29.286] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440
1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 29.286] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440
1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 30.820] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1
using pipe 0, position (0, 0), rotation normal, reflection none
[ 48.552] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI1
using pipe 0, position (0, 0), rotation normal, reflection none
[ 50.783] (II) XKB: reuse xkmfile
/var/lib/xkb/server-06D88AAF5356C6CF875D73CED515513D3FEA00ED.xkm
[ 2160.653] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI1
using pipe 0, position (0, 0), rotation normal, reflection none
"
....................................................
Reply to: