[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

How to configure eth0 with static ip and eth1 dhcp



Hi all,


I'm trying to configure a machine with two network cards to share Internet access to an internal network

the /etc/network/interface is:

# The loopback network interface
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
        address 192.168.0.1
        netmask 255.255.255.0

auto eth1
iface eth1 inet dhcp

The card eth0 is used as gateway on the internal network with static IP 192.168.0.1 and eth1 is connected to the B-890 -53 Huawei modem.

But the modem do not send an IP during initialization.

The IP of modem is192.168.1.1.

The modem sends the IP address (192.168.0.4) to my laptop by wifi without problems.

Any suggestions of what I should check?

Thanks,
Markos


Reply to: