Re: lenny boot problem

[amka <amka@hispeed.ch>]

Le jeudi 21 janvier 2010 à 11:56 +0000, Christian Koerner a écrit :
> On Thu, 21 Jan 2010, Christian Koerner wrote:
> 
> >> On Wed, 20 Jan 2010, amka wrote:
> >> 
> >> And : ls -l /dev/sd*
> >> brw-rw-rw- 1 root root 8, 0 Jan 20 22:22 /dev/sda
> >> brw-rw-rw- 1 root root 8, 1 Jan 20 22:22 /dev/sda1
> >> brw-rw-rw- 1 root root 8, 2 Jan 20 22:22 /dev/sda2
> >> 
> >> But df prints sdc1 (CD resue mode).
> >> 
> >> An other thing :
> >> I am using an 'old' mainboard and the disk is new (WD1500HLFS).
> >> I allready had problems when I trid to use a too big HDD (1TB) ; it was
> >> not recognised and Tyan informed me that I have to upgrade my BIOS.
> >> 
> >> I doubt this can have 'kernel panic' result.
> >
> > Not sure, it could be that the disk geometry is not detected properly and so 
> > it fails.
> > IMO all your configs are ok.
> >
> > Alternativ is to give grub a go but you said you had problems with grub as 
> > well.
> 
> Another possibility is to re-install Lenny when you have connected your new HDD only.

OK, Christian, I think that I will try.

Thanks for all, regards,

Amel

> Regards,
> Christian
>