Re: Voodoo3. DRI, X4.1.0 and Bus mastering <- Still no joy

[Rich Rudnick <richrudnick@yahoo.com>]

On Thu, 2001-10-04 at 07:31, Jason Healy wrote:
> At 1002229481s since epoch (10/04/01 02:04:41 -0400 UTC), john wrote:
> 
> > It's interesting that you say you have DRI working but not bus mastering. Can
> > you run setpci on the device and see if bit 3 of word 4 is set? If so my problem
> > isn't bus mastering at all.
> 
> 
> I think that says that I don't have BusMastering on (That's what the little
> minus sign "-" means, right?  I'm not a PCI expert, so you'll have to help
> me on this one).  Let me know if I should run {ls,set}pci with different
> options to give you better output.
> 

As well, here's an lspci report on my video: as you can see, the 3dfx
mentions nothing about bus mastering.

Bus  0, device  19, function  0:
VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 1).
      IRQ 11.
      Non-prefetchable 32 bit memory at 0xfc000000 [0xfdffffff].
      Prefetchable 32 bit memory at 0xf6000000 [0xf7ffffff].
      I/O at 0xe800 [0xe8ff].
Bus  1, device   0, function  0:
Display controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 92).
      Master Capable.  Latency=32.  Min Gnt=8.
      Non-prefetchable 32 bit memory at 0xf9000000 [0xf9ffffff].
      I/O at 0xd800 [0xd8ff].
      Non-prefetchable 32 bit memory at 0xfa8ff000 [0xfa8fffff].