PPP and Modem Question
Hello everyone,
Well after a couple of months I decided to connect to my ISP. I have a
machine at the local firestation that I want to use as an IPMasq
"server" and my home PC. Both have given me a bit of a problem. I am
running Debian - hamm on both.
Fire Dept. box first:
I can find the modem, it dials fine but this is the PPP log:
Jan 30 21:15:49 FVFD_S2 pppd[480]: pppd 2.3.5 started by root, uid
Jan 30 21:15:50 FVFD_S2 chat[483]: abort on (BUSY)
Jan 30 21:15:50 FVFD_S2 chat[483]: abort on (NO CARRIER)
Jan 30 21:15:50 FVFD_S2 chat[483]: abort on (VOICE)
Jan 30 21:15:50 FVFD_S2 chat[483]: abort on (NO DIALTONE)
Jan 30 21:15:50 FVFD_S2 chat[483]: abort on (NO ANSWER)
Jan 30 21:15:50 FVFD_S2 chat[483]: send (ATZ^M)
Jan 30 21:15:50 FVFD_S2 chat[483]: expect (OK)
Jan 30 21:16:09 FVFD_S2 chat[483]: ATZ^M^M
Jan 30 21:16:09 FVFD_S2 chat[483]: OK
Jan 30 21:16:09 FVFD_S2 chat[483]: -- got it
Jan 30 21:16:09 FVFD_S2 chat[483]: send (ATDT6859500^M)
Jan 30 21:16:09 FVFD_S2 chat[483]: expect (CONNECT)
Jan 30 21:16:09 FVFD_S2 chat[483]: ^M
Jan 30 21:16:49 FVFD_S2 chat[483]: ATDT6859500^M
Jan 30 21:16:49 FVFD_S2 chat[483]: CONNECT
Jan 30 21:16:49 FVFD_S2 chat[483]: -- got it
Jan 30 21:16:49 FVFD_S2 chat[483]: send (\d)
Jan 30 21:16:50 FVFD_S2 pppd[480]: Serial connection established.
Jan 30 21:16:51 FVFD_S2 pppd[480]: Using interface ppp0
Jan 30 21:16:51 FVFD_S2 pppd[480]: Connect: ppp0 <--> /dev/ttyS2
Jan 30 21:16:51 FVFD_S2 pppd[480]: sent [LCP ConfReq id=0x1 <asyncmap
0x0> <magic 0xea159cb8> <pcomp> <accomp>]
Jan 30 21:17:18 FVFD_S2 last message repeated 9 times
Jan 30 21:17:21 FVFD_S2 pppd[480]: LCP: timeout sending Config-Requests
Jan 30 21:17:21 FVFD_S2 pppd[480]: Connection terminated.
Jan 30 21:17:21 FVFD_S2 pppd[480]: Receive serial link is not 8-bit
clean:
Jan 30 21:17:21 FVFD_S2 pppd[480]: Problem: all had bit 7 set to 0
Jan 30 21:21:50 FVFD_S2 pppd[480]: Exit.
I looked at my Win98 DUN setup and it is using 8N1 for bit settings.
I do not know where to go in PPP to play with the bit settings.
My home PC is more fun! I got a Zoom 56K - PCI DualModem for Christmass
to replace a Toshiba WinModem. It appears to be plug and play.
Windows98 assigns it to COM 4, IRQ 10. Linux does not see it at all
during boot. I have tried booting to Win98 then loadlin but I still do
not get the modem.
Any suggestions?
Thanks,
--
Danny R. Gray
Research Technician
Department of Pathology
UNC-CH School of Medicine
Reply to: