[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

No me funciona la impresora



Si realizo algo como "cat fichero | lpr" la impresora no se inmuta. Si hago
"lpq", aparece el mensaje de que /dev/lp1 no está configurado. En el
arranque observo que aparece "lp0: Imposible encontrar major 6". Para más
datos, utilizo el kernel 2.2.125 y tengo una Zip externa de puerto paralelo
en lp1 que funciona perfectamente estando tanto la impresora como la Zip
puestas como módulos en el kernel.

¿Alguien sabe qué puede pasarme?. Para más datos, adjunto los mensajes de
inicio dados por dmesg, y lo que pasa al intentar imprimar algo.

Gracias,
Javi

[root@akela]# dmesg
Linux version 2.1.125 (root@akela) (gcc version 2.7.2.3) #9 SMP Wed Nov 11 12:23:48 CET 1998
mapped APIC to ffffe000 (00236000)
mapped IOAPIC to ffffd000 (00237000)
Console: colour VGA+ 80x25
Calibrating delay loop... 400.59 BogoMIPS
Memory: 63048k/65472k available (948k kernel code, 412k reserved, 1020k data, 44k init)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium II (Deschutes) stepping 02
SMP motherboard not detected. Using dummy APIC emulation.
PCI: PCI BIOS revision 2.10 entry at 0xf0750
PCI: Using configuration type 1
PCI: Probing PCI hardware
Swansea University Computer Society NET3.039 for Linux 2.1
NET3: Unix domain sockets 0.16 for Linux NET3.038.
Swansea University Computer Society TCP/IP for NET3.037
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5 
parport0: PC-style at 0x378 [SPP,ECP,ECPEPP,ECPPS2]
parport0: detected irq 7; use procfs to enable interrupt-driven operation.
Serial driver version 4.26 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
PS/2 auxiliary pointing device detected -- driver installed.
APM BIOS version 1.2 Flags 0x03 (Driver version 1.6)
    Entry f000:7770 cseg16 f000 dseg fdbd cseg len e6ff, cseg16 len 15, dseg len aa
    Connection version 1.2
    AC on line, battery status unknown, battery life unknown
    battery flag 0x80, battery life unknown
Sound initialization started
Sound initialization complete
PIIX4: IDE controller on PCI bus 00 dev 21
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:DMA
hda: ST36531A, ATA DISK drive
hdb: ST32122A, ATA DISK drive
hdd: CREATIVE CD3231E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: ST36531A, 6204MB w/128kB Cache, CHS=790/255/63, UDMA
hdb: ST32122A, 2014MB w/128kB Cache, CHS=1023/64/63, UDMA
hdd: ATAPI 32X CDROM drive, 512kB Cache
Uniform CDROM driver Revision: 2.14
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
scsi : 0 hosts.
scsi : detected total.
Partition check:
 hda: hda1
 hdb: hdb1 hdb2 < hdb5 >
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 44k freed
Adding Swap: 29700k swap-space (priority -1)
lp0: using parport0 (polling).
lp: unable to get major 6
CSLIP: code copyright 1989 Regents of the University of California
PPP: version 2.3.3 (demand dialling)
PPP line discipline registered.
PPP BSD Compression module registered
TIOCSER?WILD ioctl obsolete, ignored.
TIOCSER?WILD ioctl obsolete, ignored.


[root@akela]# cat fichero.txt | lpr
[root@akela]# lpq
Printer: lp@akela  'Generic dot-matrix printer entry'
 Queue: 1 printable job
 Server: pid 251 active
 Unspooler: pid 252 active
 Status: cannot open '/dev/lp1' - 'Device not configured', attempt 2, sleeping 20 at 13:32:12
 Rank   Owner/ID                   Class Job  Files               Size Time    
active  root@akela+250                 A  250 (stdin)            1384 13:32:02



Reply to: