Re: No me funciona la impresora
Yo tuve el mismo problema. Me funcionaba bien con el kernel
2.0.34, y eso me sucedio luego de cambiarme al kernel 2.1.126.
Yo cambie el /etc/printcap:
Antes tenia /dev/lp1 y puse /dev/lp0.
Tal vez te ayude en algo,
Saludos,
Alexis.
Date forwarded: 11 Nov 1998 14:54:19 -0000
From: "Javier Viñuales Gutiérrez" <vigu@ctv.es>
To: "Debian-Lista Correo en español" <debian-user-spanish@lists.debian.org>
Subject: No me funciona la impresora
Date sent: Wed, 11 Nov 1998 15:22:02 +0100
Forwarded by: debian-user-spanish@lists.debian.org
> [root@akela]# dmesg
> Linux version 2.1.125 (root@akela) (gcc version 2.7.2.3) #9 SMP Wed Nov 11 12:23:48 CET 1998
> mapped APIC to ffffe000 (00236000)
> mapped IOAPIC to ffffd000 (00237000)
> Console: colour VGA+ 80x25
> Calibrating delay loop... 400.59 BogoMIPS
> Memory: 63048k/65472k available (948k kernel code, 412k reserved, 1020k data, 44k init)
> Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> CPU0: Intel Pentium II (Deschutes) stepping 02
> SMP motherboard not detected. Using dummy APIC emulation.
> PCI: PCI BIOS revision 2.10 entry at 0xf0750
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Swansea University Computer Society NET3.039 for Linux 2.1
> NET3: Unix domain sockets 0.16 for Linux NET3.038.
> Swansea University Computer Society TCP/IP for NET3.037
> IP Protocols: ICMP, UDP, TCP
> Starting kswapd v 1.5
> parport0: PC-style at 0x378 [SPP,ECP,ECPEPP,ECPPS2]
> parport0: detected irq 7; use procfs to enable interrupt-driven operation.
> Serial driver version 4.26 with no serial options enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> pty: 256 Unix98 ptys configured
> lp0: using parport0 (polling).
> PS/2 auxiliary pointing device detected -- driver installed.
> APM BIOS version 1.2 Flags 0x03 (Driver version 1.6)
> Entry f000:7770 cseg16 f000 dseg fdbd cseg len e6ff, cseg16 len 15, dseg len aa
> Connection version 1.2
> AC on line, battery status unknown, battery life unknown
> battery flag 0x80, battery life unknown
> Sound initialization started
> Sound initialization complete
> PIIX4: IDE controller on PCI bus 00 dev 21
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:DMA
> hda: ST36531A, ATA DISK drive
> hdb: ST32122A, ATA DISK drive
> hdd: CREATIVE CD3231E, ATAPI CDROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: ST36531A, 6204MB w/128kB Cache, CHS=790/255/63, UDMA
> hdb: ST32122A, 2014MB w/128kB Cache, CHS=1023/64/63, UDMA
> hdd: ATAPI 32X CDROM drive, 512kB Cache
> Uniform CDROM driver Revision: 2.14
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> scsi : 0 hosts.
> scsi : detected total.
> Partition check:
> hda: hda1
> hdb: hdb1 hdb2 < hdb5 >
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 44k freed
> Adding Swap: 29700k swap-space (priority -1)
> lp0: using parport0 (polling).
> lp: unable to get major 6
> CSLIP: code copyright 1989 Regents of the University of California
> PPP: version 2.3.3 (demand dialling)
> PPP line discipline registered.
> PPP BSD Compression module registered
> TIOCSER?WILD ioctl obsolete, ignored.
> TIOCSER?WILD ioctl obsolete, ignored.
>
>
> [root@akela]# cat fichero.txt | lpr
> [root@akela]# lpq
> Printer: lp@akela 'Generic dot-matrix printer entry'
> Queue: 1 printable job
> Server: pid 251 active
> Unspooler: pid 252 active
> Status: cannot open '/dev/lp1' - 'Device not configured', attempt 2, sleeping 20 at 13:32:12
> Rank Owner/ID Class Job Files Size Time
> active root@akela+250 A 250 (stdin) 1384 13:32:02
>
>
Reply to: