MPlayer
Witam!
Postanowilem ze teraz zajme sie odpaleniem filmow w Linuxie..
Probowalem najpierw kompilowac Mplayer ze stronki autora, ale cos zawsze
brakowalo juz przy ./configure
to zainstalowalem apt-get'em z deb http://marillat.free.fr/ unstable main.
pomijam juz ze nie odpala gui, jak odpalam z konsoli mam:
MPlayer 1.0pre3-3.3.3 (C) 2000-2003 MPlayer Team
CPU: Advanced Micro Devices Athlon MP/XP/XP-M Barton 2163 MHz (Family: 6,
Stepping: 0)
Detected cache-line size is 64 bytes
MMX2 supported but disabled
3DNow supported but disabled
3DNowExt supported but disabled
CPUflags: MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX SSE
Reading config file /etc/mplayer/mplayer.conf
Reading config file /root/.mplayer/config
Reading /root/.mplayer/codecs.conf: This codecs.conf is too old and
incompatible with this MPlayer release! at line 15
Reading /etc/mplayer/codecs.conf: 61 audio & 169 video codecs
font: can't open file: /root/.mplayer/font/font.desc
font: can't open file: /usr/share/mplayer/font/font.desc
Using Linux hardware RTC timing (1024Hz).
Input config file /root/.mplayer/input.conf parsed: 52 binds
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : No such device
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
Playing /mnt/E/Porno/porno.(1989).[pindur].(osloskop.net).avi.
Cache fill: 0.00% (0 bytes) AVI file format detected.
VIDEO: [DX50] 640x456 24bpp 25.000 fps 1000.4 kbps (122.1 kbyte/s)
Clip info:
Software: VirtualDubMod 1.4.13
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
MP3lib: init layer2&3 finished, tables done
AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 12000->192000 (96.0 kbit)
Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
vo: couldn't open the X11 display ()!
Error opening/initializing the selected video_out (-vo) device.
Exiting... (End of file)
I tu mnie intryguje ten problem z X11, bo tez go mialem podczas instalacji
ze zrodelek.
O co w tym chodzi?
To jest wersja 1.0 Mplayera, a plik codecs.conf podkopiowalem od 0.91 i tu
tez sie burzy o to.
Poza tym nie mam pliku gui.conf.. a tez by sie przydal. Jaka ma byc jego
zawartosc.
Dzieki za pomoc.
pszemaz
Reply to: