Re: Dateisystem hinüber?
Simon Jolle "sjolle" schrieb:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 12/28/2007 06:54 PM, Gerhard Lindel wrote:
Ich habe dann fsck laufen lassen. Fsck hat dann jede Menge Fehler im
Dateisystem gefunden. Seither gibt es in /lost&found ca 6000 Elemente.
Seht ihr irgend eine Chance der Reparatur oder wird eine
Neuinstallation fällig. (Daten sind natürlich gesichert).
Oder geht meine Festplatte kaputt?
Hallo Gerhard
Bitte schaue auch mal deine Logfiles an und mach eine Harddisk Diagnose
mit "smartmontools".
Die 6K Elemente aus lost+found zu recovern dürfte eine Menge Aufwand
sein, denn das sind nicht ganze Files, sondern Fragmente/Blöcke.
beste Grüsse
Simon
Hallo Simon,
in den Logfiles finde ich nichts aufregendes, also keine
Fehlermeldungen. Dass ich die Elemente aus lost&found nicht mehr
zusammenbekomme ist schon klar. Da ist eine Neuinstallation einfacher.
Mit smartctl bekomme ich folgendes:
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG SP1614N
Serial Number: S016J10XA22823
Firmware Version: TM100-24
User Capacity: 160.041.885.696 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Fri Dec 28 21:24:54 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
Warning! SMART Attribute Data Structure error: invalid SMART checksum.
Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0xff) Offline data collection activity
is in a Vendor Specific state
.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 255) Self-test routine in progress...
150% of test remaining.
Total time to complete Offline
data collection: (65535) seconds.
Offline data collection
capabilities: (0xff) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0xffff) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0xff) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 255) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 255) minutes.
SMART Attributes Data Structure revision number: 65535
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 1099511627775
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
255 Unknown_Attribute 0xffff 255 255 255 Pre-fail
Always FAILING_NOW 281474976710655
Warning! SMART ATA Error Log Structure error: invalid SMART checksum.
SMART Error Log Version: 255
Invalid Error Log index = 0xff (T13/1321D rev 1c Section 8.41.6.8.2.2
gives valid range from 1 to 5)
Warning! SMART Self-Test Log Structure error: invalid SMART checksum.
SMART Self-test log structure revision number 65535
Warning: ATA Specification requires self-test log structure revision
number = 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Vendor offline Self-test routine in progress 150%
65535 -
# 2 Vendor offline Self-test routine in progress 150%
65535 -
# 3 Vendor offline Self-test routine in progress 150%
65535 -
# 4 Vendor offline Self-test routine in progress 150%
65535 -
# 5 Vendor offline Self-test routine in progress 150%
65535 -
# 6 Vendor offline Self-test routine in progress 150%
65535 -
# 7 Vendor offline Self-test routine in progress 150%
65535 -
# 8 Vendor offline Self-test routine in progress 150%
65535 -
# 9 Vendor offline Self-test routine in progress 150%
65535 -
#10 Vendor offline Self-test routine in progress 150%
65535 -
#11 Vendor offline Self-test routine in progress 150%
65535 -
#12 Vendor offline Self-test routine in progress 150%
65535 -
#13 Vendor offline Self-test routine in progress 150%
65535 -
#14 Vendor offline Self-test routine in progress 150%
65535 -
#15 Vendor offline Self-test routine in progress 150%
65535 -
#16 Vendor offline Self-test routine in progress 150%
65535 -
#17 Offline Self-test routine in progress 150%
0 -
#18 Vendor offline Self-test routine in progress 150%
65535 -
#19 Vendor offline Self-test routine in progress 150%
65535 -
#20 Vendor offline Self-test routine in progress 150%
65535 -
#21 Vendor offline Self-test routine in progress 150%
65535 -
Warning! SMART Selective Self-Test Log Structure error: invalid SMART
checksum.
SMART Selective Self-Test Log Data Structure Revision Number (65535)
should be 1
SMART Selective self-test log data structure revision number 65535
Warning: ATA Specification requires selective self-test log data
structure revision number = 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 18446744073709551615 18446744073709551615 Not_testing
2 18446744073709551615 18446744073709551615 Not_testing
3 18446744073709551615 18446744073709551615 Not_testing
4 18446744073709551615 18446744073709551615 Not_testing
5 18446744073709551615 18446744073709551615 Not_testing
65535 18446744073709551615 65534 Read_scanning is in a
Vendor Specific state
Selective self-test flags (0xffff):
Currently read-scanning the remainder of the disk.
If Selective self-test is pending on power-up, resume after 65535 minute
delay.
Ich bin nicht sicher was das genau bedeutet. Ist jetzt nur das
Dateisystem (ext3) hinüber oder die Festplatte?
Gruß
Gerhard
Reply to: