Re: Résolution pour PC portable
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Le 19/04/2009 11:25, Dera a écrit :
> Sylvain Sauvage a écrit :
>> Dera, samedi 18 avril 2009, 15:02:26 CEST
>>
>> ’lut,
>>
>>
>> « Configured Video Device » doit être le nom de la carte
>> configurée.
>> Sans les messages ni le xorg.conf, on n’ira pas bien loin…
>>
>
>
> Voila mon xorg.conf :
>
> # xorg.conf (X.Org X Window System server configuration file)
> #
> # This file was generated by dexconf, the Debian X Configuration tool,
> using
> # values from the debconf database.
> #
> # Edit this file with caution, and see the xorg.conf manual page.
> # (Type "man xorg.conf" at the shell prompt.)
> #
> # This file is automatically updated on xserver-xorg package upgrades
> *only*
> # if it has not been modified since the last upgrade of the xserver-xorg
> # package.
> #
> # If you have edited this file but would like it to be automatically
> updated
> # again, run the following command:
> # sudo dpkg-reconfigure -phigh xserver-xorg
>
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "kbd"
> Option "XkbRules" "xorg"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "fr"
> Option "XkbVariant" "latin9"
> Option "XkbOptions" "lv3:ralt_switch"
> EndSection
>
> Section "InputDevice"
> Identifier "Configured Mouse"
> Driver "mouse"
> EndSection
>
>
> #Section "Device"
> # Identifier "Configured Video Device"
> #EndSection
>
> #Section "Device"
> # Identifier "Configured Video Device"
> # Driver "nv"
> # BusID "PCI:1:0:0"
> #EndSection
>
> Section "Device"
> Identifier "Configured Video Device"
> Driver "vesa"
> BusID "PCI:0:2:0"
> EndSection
>
>
> Section "Monitor"
> Identifier "Configured Monitor"
> EndSection
>
>
> #Section "Screen"
> # Identifier "Default Screen"
> # Monitor "Configured Monitor"
> #EndSection
>
> Section "Screen"
> Identifier "Default Screen"
> Device "Configured Video Device"
> Monitor "Configured Monitor"
> DefaultDepth 16
> SubSection "Display"
> Depth 1
> Modes "1366x768"
> EndSubSection
> SubSection "Display"
> Depth 4
> Modes "1366x768"
> EndSubSection
> SubSection "Display"
> Depth 8
> Modes "1366x768" "1024x768"
> EndSubSection
> SubSection "Display"
> Depth 15
> Modes "1366x768"
> EndSubSection
> SubSection "Display"
> Depth 16
> Modes "1366x768"
> EndSubSection
> SubSection "Display"
> Depth 24
> Modes "1366x768"
> EndSubSection
> EndSection
>
>
>>
>> Que dit xrandr ?
>>
>
>
> Et pour xrandr :
>
> Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768
> default connected
> 1024x768 0.0
> 800x600 61.0
> 640x480 60.0
>
>
> J'ai l'impression d'avoir les mauvais drivers installé pour l'Intel ...
>
> Pour la nvidia, je n'arrive meme pas a lancer l'interface graphique. Ni
> avec les drivers propriétaire ni avec "nv" :
>
> (II) NV(0): Initializing int10
> (EE) Cannot find empty range to map base to
> (EE) NV(0): Cannot read V_BIOS (3)
> (EE) NV(0): Failed to initialize the int10 module; this screen will not
> be initialized.
> (II) UnloadModule: "nv"
> (II) UnloadModule: "int10"
> (II) Unloading /usr/lib/xorg/modules//libint10.so
> (EE) Screen(s) found, but none have a usable configuration.
>
> Fatal server error:
> no screens found
>
>
> J'ai essayé avec plusieurs xorg.conf mais toujours la meme chose :
> "(EE) Screen(s) found, but none have a usable configuration."
>
> Avant d'installer debian, j'ai mis une mandriva PowerP. et avec sa
> tournai nikel mais j'ai pas pensé a recupérer le xorg.conf
>
> J'ai oublié de préciser que que je suis en 2.6.29 si c'est utile.
>
>
>
>
>
> François a écrit :
>> Dera avait prétendu :
>>
>>> Si quelqu'un avait une idées je suis preneur.
>>
>> Installation du module assistant et récupération du paquet nvidia :
>> aptitude install nvidia-kernel-common module-assistant
>>
>> • Installation du pilote proprement dit :
>> module-assistant auto-install nvidia
>
> Sa bloque et me dit :
>
> "La construction du paquet nvidia-kernel-source a échoué."
>
> En plus, si je n'arrive pas a lancer l'interface en mettant cette carte
> graphique, sa pourra pas m'aider plus que ca non ? ou alors sa me la
> lancera ?
>
>
> Merci pour votre aide vraiment.
>
Juste une question, pourquoi la section Device est en double, et est
commentée ?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iQIcBAEBAgAGBQJJ6zDcAAoJEIZ9S3mEdJndP0oP/Aqede7lx6YhSduVZzYGvtRo
sBCymhBS3V33TdG4kxBJ+uVcUvV2sv0eTamEiNlWKxK2NDYv7WNkcgjNXQ1fqF7q
CrgZsPgS/mdF9QSbo7Y/P0ok/a1oF5/Ofqpg7lvbRBI7p+dUyUG+i0LC4P77n2iH
0RZa4kjC36n/WpEFT9ZO388gfXYGf6XhPTIRL8c8k05pu3DOXjUCTysPTcuaxOXL
AGgoK8rrOfml0KPctWt3AooTjWjsI5HVnaeA4c7QFMG+im1zwaRbwauVnfeI9mef
4i29mNCeouRHzwqv6/9sHpgoadfW0uF7YN/iHyKWsYxtt+tDYIDTjKKTCMd2W3d7
8cGCwTB+Da8YtOaYB+9HoQhEtjAtBk01rN0eN3A9GMPu1zRwBtOy83L5PoyaAebw
isIWuHcuH+xUmfoj9TJuII+2z/StuyQfyZwUmKhwyPpw/LVarr4H1nlX1JmcYqAX
dA4ak0uxXPhqShHRsaeglHWHkmGrFLRJhqnu5l7dB1MyKFKsfXOxNb1i5tOLvhlr
0SQGEEcl4cOtRRM0amzb3hDR9xY4f+g60ax2wiyYZREpqlrB9W+d3yFftNqOLYj3
aAiwgXv0B1YI43nbV/6BDZ3GC86lCZWm1OXN1IttXhZPihbtGi8VG3OOkuZ9PapX
V9tUXo/fMGUx4e6Kv6DC
=VYX/
-----END PGP SIGNATURE-----
Reply to: