[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Résolution pour PC portable



Sylvain Sauvage a écrit :
> Dera, samedi 18 avril 2009, 15:02:26 CEST
>
> ’lut,
>
>
>   « Configured Video Device » doit être le nom de la carte
> configurée.
>   Sans les messages ni le xorg.conf, on n’ira pas bien loin…
>


Voila mon xorg.conf :

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "kbd"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "fr"
    Option        "XkbVariant"    "latin9"
    Option        "XkbOptions"    "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
EndSection


#Section "Device"
#    Identifier    "Configured Video Device"
#EndSection

#Section "Device"
#    Identifier    "Configured Video Device"
#    Driver        "nv"
#    BusID        "PCI:1:0:0"
#EndSection

Section "Device"
    Identifier    "Configured Video Device"
    Driver        "vesa"
    BusID        "PCI:0:2:0"
EndSection


Section "Monitor"
    Identifier    "Configured Monitor"
EndSection


#Section "Screen"
#    Identifier    "Default Screen"
#    Monitor        "Configured Monitor"
#EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device        "Configured Video Device"
    Monitor        "Configured Monitor"
    DefaultDepth    16
    SubSection "Display"
        Depth        1
        Modes        "1366x768"
    EndSubSection
    SubSection "Display"
        Depth        4
        Modes        "1366x768"
    EndSubSection
    SubSection "Display"
        Depth        8
        Modes        "1366x768" "1024x768"
    EndSubSection
    SubSection "Display"
        Depth        15
        Modes        "1366x768"
    EndSubSection
    SubSection "Display"
        Depth        16
        Modes        "1366x768"
    EndSubSection
    SubSection "Display"
        Depth        24
        Modes        "1366x768"
    EndSubSection
EndSection


>
>   Que dit xrandr ?
>


Et pour xrandr :

Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768
default connected
   1024x768        0.0
   800x600        61.0
   640x480        60.0


J'ai l'impression d'avoir les mauvais drivers installé pour l'Intel ...

Pour la nvidia, je n'arrive meme pas a lancer l'interface graphique. Ni
avec les drivers propriétaire ni avec "nv" :

(II) NV(0): Initializing int10
(EE) Cannot find empty range to map base to
(EE) NV(0): Cannot read V_BIOS (3)
(EE) NV(0): Failed to initialize the int10 module; this screen will not be initialized.
(II) UnloadModule: "nv"
(II) UnloadModule: "int10"
(II) Unloading /usr/lib/xorg/modules//libint10.so
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found


J'ai essayé avec plusieurs xorg.conf mais toujours la meme chose :
"(EE) Screen(s) found, but none have a usable configuration."

Avant d'installer debian, j'ai mis une mandriva PowerP. et avec sa tournai nikel mais j'ai pas pensé a recupérer le xorg.conf

J'ai oublié de préciser que que je suis en 2.6.29 si c'est utile.





François a écrit :
Dera avait prétendu :

Si quelqu'un avait une idées je suis preneur.

Installation du module assistant et récupération du paquet nvidia :
aptitude install nvidia-kernel-common module-assistant

• Installation du pilote proprement dit :
module-assistant auto-install nvidia

Sa bloque et me dit :

"La construction du paquet nvidia-kernel-source a échoué."

En plus, si je n'arrive pas a lancer l'interface en mettant cette carte graphique, sa pourra pas m'aider plus que ca non ? ou alors sa me la lancera ?


Merci pour votre aide vraiment.


Reply to: