> Mar 22 07:58:44 localhost kernel: hdb: HDS725050KLAT80, ATA DISK drive
> Mar 22 07:58:44 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Mar 22 07:58:44 localhost kernel: hdc: HDS725050KLAT80, ATA DISK drive
> Mar 22 07:58:44 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
> Mar 22 07:58:44 localhost kernel: hdb: max request size: 1024KiB
> Mar 22 07:58:44 localhost kernel: hdb: Host Protected Area detected.
_________________________________________^^^^^^^^^^^^^^^^^^^^^^^^^^^^
et pas pour hdc : des secteurs défectueux ? :/
> je vous joins aussi mes logs *smartd* concernant ces deux disques, peut etre
> que cela peut vous aider a comprendre, moi ca me laisse perplexe :)
[...]
Sur ce que tu cites, on ne voit pas trop de différence entre hdb et hdc ...
Est-ce plus clair avec la sortie des «smartctl -a /dev/hd[b ou c]» ?
smartctl -a /dev/hdb
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: HDS725050KLAT80
Serial Number: KRVA03ZAGMGBVD
Firmware Version: K2AOA10C
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1
Local Time is: Thu Mar 23 15:49:08 2006 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (10419) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 174) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 100
3 Spin_Up_Time 0x0007 227 227 024 Pre-fail Always - 229 (Average 387)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 10
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 136 136 020 Pre-fail Offline - 31
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 1220
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 10
192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 61
193 Load_Cycle_Count 0x0012 100 100 050 Old_age Always - 61
194 Temperature_Celsius 0x0002 144 144 000 Old_age Always - 38 (Lifetime Min/Max 25/42)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1206 -
# 2 Short offline Completed without error 00% 1182 -
# 3 Short offline Completed without error 00% 1158 -
# 4 Short offline Completed without error 00% 1134 -
# 5 Short offline Completed without error 00% 1110 -
# 6 Short offline Completed without error 00% 1086 -
# 7 Short offline Completed without error 00% 1062 -
# 8 Short offline Completed without error 00% 1038 -
# 9 Short offline Completed without error 00% 1014 -
#10 Short offline Completed without error 00% 966 -
#11 Short offline Completed without error 00% 942 -
#12 Short offline Completed without error 00% 918 -
#13 Short offline Completed without error 00% 894 -
#14 Extended offline Completed without error 00% 812 -
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl -a /dev/hdc
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: HDS725050KLAT80
Serial Number: KRVA03ZAGBNZSD
Firmware Version: K2AOA10C
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1
Local Time is: Thu Mar 23 15:50:32 2006 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (10419) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 174) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 160 160 050 Pre-fail Offline - 202
3 Spin_Up_Time 0x0007 220 220 024 Pre-fail Always - 234 (Average 401)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 10
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 136 136 020 Pre-fail Offline - 31
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 1221
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 10
192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 60
193 Load_Cycle_Count 0x0012 100 100 050 Old_age Always - 60
194 Temperature_Celsius 0x0002 144 144 000 Old_age Always - 38 (Lifetime Min/Max 25/43)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1208 -
# 2 Short offline Completed without error 00% 1183 -
# 3 Short offline Completed without error 00% 1159 -
# 4 Short offline Completed without error 00% 1135 -
# 5 Short offline Completed without error 00% 1111 -
# 6 Short offline Completed without error 00% 1087 -
# 7 Short offline Completed without error 00% 1063 -
# 8 Short offline Completed without error 00% 1039 -
# 9 Short offline Completed without error 00% 1015 -
#10 Short offline Completed without error 00% 967 -
#11 Short offline Completed without error 00% 943 -
#12 Short offline Completed without error 00% 919 -
#13 Short offline Completed without error 00% 895 -
Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
--
Jacques L'helgoualc'h
--
Pensez à lire la FAQ de la liste avant de poser une question :
http://wiki.debian.net/?DebianFrench
Pensez à rajouter le mot ``spam'' dans vos champs "From" et "Reply-To:"
To UNSUBSCRIBE, email to debian-user-french-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org