Re: Fw: ou est mon cdrom ?

[Christian Gennerat <xgen@free.fr>]

Frederico a écrit:

> > j ai installé debian dimanche a la lcp
> > mais je sais pas voir le contenu de mon cd rom
> >
> >    
> >
> > CPU: AMD Athlon(tm) Processor stepping 02
> > Disabling VIA memory write queue: [55] 89->09
> > Unknown bridge resource 0: assuming transparent
> > Applying VIA southbridge workaround.
> > PCI: Disabling Via external APIC routing
> >    

> > Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
> > ttyS00 at 0x03f8 (irq = 4) is a 16550A
> > ttyS01 at 0x02f8 (irq = 3) is a 16550A
> >    

> > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> > VP_IDE: IDE controller on PCI bus 00 dev 39
> > VP_IDE: chipset revision 6
> > VP_IDE: not 100% native mode: will probe irqs later
> > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> > VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
> >    ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:DMA
> >    ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:DMA
> > hdb: C/H/S=0/0/0 from BIOS ignored
> > hdb: ST320413A, ATA DISK drive
> > hdd: AOPEN CD-RW CRW2440, ATAPI CD/DVD-ROM drive
> > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > ide1 at 0x170-0x177,0x376 on irq 15
> > hdb: 39102336 sectors (20020 MB) w/1024KiB Cache, CHS=38792/16/63
> > hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
> > Uniform CD-ROM driver Revision: 3.12
> > ide-floppy driver 0.97.sv
> > Partition check:
> > hdb: [PTBL] [2434/255/63] hdb1 hdb2 hdb3
> > Floppy drive(s): fd0 is 1.44M
> > FDC 0 is a post-1991 82077
> > Loading I2O Core - (c) Copyright 1999 Red Hat Software
> >    
Disque et partitions trouvés
CD/RW trouvé sur hdd. OK

> > eth0: 100/10M Ethernet PCI Adapter at 0xdc00, 00:40:95:20:12:a8, IRQ 10.
> > 8139cp 10/100 PCI Ethernet driver v0.0.6 (Nov 19, 2001)
> > 8139cp: pci dev 00:0c.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
> > 8139cp: Try the "8139too" driver instead.
> > 8139too Fast Ethernet driver 0.9.24
> > eth1: RealTek RTL8139 Fast Ethernet at 0xd081a000, 00:10:a7:0a:47:61, IRQ 11
> > eth1:  Identified 8139 chip type 'RTL-8139C'
> >    

> > ide-floppy driver 0.97.sv
> > Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
> > Highpoint HPT370 Softwareraid driver for linux version 0.01
> > No raid array found
RAID est-ce bien utile ?

> > SCSI subsystem driver Revision: 1.00
> > Red Hat/Adaptec aacraid driver, Apr 14 2002
> > DC390: 0 adapters found
> > 3ware Storage Controller device driver for Linux v1.02.00.016.
> > 3w-xxxx: No cards with valid units found.
> > request_module[scsi_hostadapter]: Root fs not mounted
> > request_module[scsi_hostadapter]: Root fs not mounted
> > i2o_scsi.c: Version 0.0.1
> >  chain_pool: 0 bytes @ c1404e80
> >  (512 byte buffers X 4 can_queue X 0 i2o controllers)
> > NET4: Linux TCP/IP 1.0 for NET4.0
> > IP Protocols: ICMP, UDP, TCP, IGMP
> > IP: routing cache hash table of 2048 buckets, 16Kbytes
> > TCP: Hash tables configured (established 16384 bind 16384)
> > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> > kjournald starting.  Commit interval 5 seconds
> > EXT3-fs: mounted filesystem with ordered data mode.
> > VFS: Mounted root (ext3 filesystem) readonly.
> > Freeing unused kernel memory: 280k freed
> > spurious 8259A interrupt: IRQ7.
> > Adding Swap: 248996k swap-space (priority -1)
> > EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,65), internal journal
jusqu'ici tout va bien
interrupt sur IRQ7. classique et pas méchant

> > usb.c: registered new driver usbdevfs
> > usb.c: registered new driver hub
> > usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002
> > usb-uhci.c: High bandwidth mode enabled
> > usb-uhci.c: USB UHCI at I/O 0xc400, IRQ 10
> > usb-uhci.c: Detected 2 ports
> > usb.c: new USB bus registered, assigned bus number 1
> > hub.c: USB hub found
> > hub.c: 2 ports detected
> > usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 10
> > usb-uhci.c: Detected 2 ports
> > usb.c: new USB bus registered, assigned bus number 2
> > hub.c: USB hub found
> > hub.c: 2 ports detected
> > usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
> > usb.c: registered new driver keyboard
> > usbkbd.c: :USB HID Boot Protocol keyboard driver
clavier seulement ?

> > scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> > apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
> > kjournald starting.  Commit interval 5 seconds
> > EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,67), internal journal
> > EXT3-fs: mounted filesystem with ordered data mode.
montage /home fait.
essai de montage /cdrom

> > VFS: Disk change detected on device ide1(22,64)
> > hdd: command error: status=0x51 { DriveReady SeekComplete Error }
> > hdd: command error: error=0x50
> > end_request: I/O error, dev 16:40 (hdd), sector 64
> >    
ça se gate.
y-a-t-il un CD en bon état ?
le lecteur fonctionne t il avec d'autres systèmes ?