Fw: ou est mon cdrom ?
>
> j ai installé debian dimanche a la lcp
> mais je sais pas voir le contenu de mon cd rom
>
> je vous joint les fichiers suivants
>
>
> > moici ce que j ai en fesant un dmesg
> > et le fichier /etc/fstab
> >
> > ils sont només dmseg.txt
> > et fstab.txt
> >
> > Merci
> >
> > Frederico
> >
> > ----
> >
>
Linux version 2.4.18-bf2.4 (root@zombie) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Kernel command line: auto BOOT_IMAGE=Linux ro root=341
Initializing CPU#0
Detected 999.561 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1992.29 BogoMIPS
Memory: 254640k/262080k available (1783k kernel code, 7052k reserved, 549k data, 280k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 999.5489 MHz.
..... host bus clock speed is 199.9097 MHz.
cpu: 0, clocks: 1999097, slice: 999548
CPU0<T0:1999088,T1:999536,D:4,S:999548,C:1999097>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb250, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Disabling VIA memory write queue: [55] 89->09
Unknown bridge resource 0: assuming transparent
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:DMA
ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:DMA
hdb: C/H/S=0/0/0 from BIOS ignored
hdb: ST320413A, ATA DISK drive
hdd: AOPEN CD-RW CRW2440, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdb: 39102336 sectors (20020 MB) w/1024KiB Cache, CHS=38792/16/63
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97.sv
Partition check:
hdb: [PTBL] [2434/255/63] hdb1 hdb2 hdb3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Loading I2O Core - (c) Copyright 1999 Red Hat Software
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
loop: loaded (max 8 devices)
Compaq CISS Driver (v 2.4.5)
fealnx.c:v2.51 Nov-17-2001
eth0: 100/10M Ethernet PCI Adapter at 0xdc00, 00:40:95:20:12:a8, IRQ 10.
8139cp 10/100 PCI Ethernet driver v0.0.6 (Nov 19, 2001)
8139cp: pci dev 00:0c.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.24
eth1: RealTek RTL8139 Fast Ethernet at 0xd081a000, 00:10:a7:0a:47:61, IRQ 11
eth1: Identified 8139 chip type 'RTL-8139C'
HDLC support module revision 1.02 for Linux 2.4
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.97.sv
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver, Apr 14 2002
DC390: 0 adapters found
3ware Storage Controller device driver for Linux v1.02.00.016.
3w-xxxx: No cards with valid units found.
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
i2o_scsi.c: Version 0.0.1
chain_pool: 0 bytes @ c1404e80
(512 byte buffers X 4 can_queue X 0 i2o controllers)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 280k freed
spurious 8259A interrupt: IRQ7.
Adding Swap: 248996k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,65), internal journal
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xc400, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver keyboard
usbkbd.c: :USB HID Boot Protocol keyboard driver
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,67), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Disk change detected on device ide1(22,64)
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 64
isofs_read_super: bread failed, dev=16:40, iso_blknum=16, block=32
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 64
isofs_read_super: bread failed, dev=16:40, iso_blknum=16, block=32
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 0
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 2
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 4
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 6
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 0
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 2
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 4
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 6
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 0
FAT: unable to read boot sector
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 0
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 1
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 2
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 3
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 4
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 5
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 6
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 7
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 0
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 1
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 2
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 3
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 4
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 5
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 6
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 7
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 0
FAT: unable to read boot sector
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 64
isofs_read_super: bread failed, dev=16:40, iso_blknum=16, block=32
hdd: command error: status=0x51 { DriveReady SeekComplete Error }
hdd: command error: error=0x50
end_request: I/O error, dev 16:40 (hdd), sector 2
EXT2-fs: unable to read superblock
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/hdb1 / ext3 errors=remount-ro 0 1
/dev/hdb2 none swap sw 0 0
proc /proc proc defaults 0 0
/dev/fd0 /floppy auto user,noauto 0 0
/dev/cdrom /cdrom iso9660 ro,user,noauto 0 0
/dev/hdb3 /home ext3 defaults 0 2
Reply to: