[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: How to boot SUN T5220?



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

On 05/09/2011 05:42 PM, Jurij Smakov wrote:
> On Mon, May 09, 2011 at 05:19:03PM -0300, Flamarion Jorge wrote:
> [...] 
>>> First thanks for trying to help me.
>>>
>>> My problem is: I can not load the silo from the "ok prompt"
>>>
>>> When i install Debian, using guided partitioning of Debian Installer,
>>> and the installation finished successfully, after the first reboot I get
>>> the following message:
>>>
>>> {0} ok boot disk
>>> Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@0  File and args:
>>> Bad magic number in disk label
>>> Can't open disk label package
>>> ERROR: boot-read fail
>>>
>>>
>>> Can't open boot device
>>>
>>>> Try 'boot disk1'.
>>
>> Hi Jurij,
>>
>> {0} ok boot disk1
>> Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@1  File and args:
>> ERROR: boot-read fail
>>
>>
>> Can't open boot device
>>
>> {0} ok
> 
> Ok, it must be something else then. Usually, when there is a problem 
> with disklabel, a standard recommendation is to zero out the first few 
> megabytes of the disks and then write a brand new disklabel to make 
> sure that everything is ok (warning: this will irrecoverably destroy 
> all data on the disks!). It goes something like this:
> 
> 1. Boot the installer as usual.
> 2. Proceed to the point where the disks are detected and partitioner 
> is started.
> 3. Press 'Back' button until you get to installer menu.
> 4. Choose an option to start a shell.
> 5. Run the following commands:
> 
> dd if=/dev/zero of=/dev/sda bs=1M count=100
> dd if=/dev/zero of=/dev/sdb bs=1M count=100
> sync
> 
> 6. Exit the shell and restart the partitioner.
> 7. Choose the guided partitioning, it should write a new disklabel and 
> create the partitions.
> 8. Continue installation as usual.
> 
> Best regards,
> --
> Jurij Smakov                                           jurij@wooyd.org
> Key: http://www.wooyd.org/pgpkey/                      KeyID: C99E03CC
> 
> 


Jurij,

I followed your tip, but the result was the same.

Attached below the install script to follow, there may be something I
did wrong and not noticed.

If there is anything I can do, I would be grateful in hearing from you.

[]'s

- -- 
Flamarion Jorge
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
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=Qr3U
-----END PGP SIGNATURE-----

Attachment: roteiro_intalacao_sparc_netboot
Description: Binary data


Reply to: