[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Problen setting modem port speed.



Hi,

I'm having a problem getting a modem connection speed other than
9600.  I hacked pppd to print out the termios speeds and they are being
set properly.  I also hacked chat to print out the connection speed and
it is always 9600 regardless of the speed set in the file in
/etc/ppp/peers.
I double check the connection speed with ping which always gives the
same results.

I have tried different modems and different firmware loads with the same

result.  The modems work fine on NT.  Both modems used to work with
2.1 and with woody up to about two months ago.  I'm currently using a
standard 2.2 off a cd.

I could go back to 2.1 or I could borrow an rs232 analyzer and keep
hacking
at the source but I thought I would check if anyone has any suggestions
before
I dig into it further.

Thanks,

Bob.



Reply to: