Bug#1008997: cups: impossible to print on hp envy 5536 from sid

[alain <compte.perso.de-alain@bbox.fr>]

alain@sid:~$ apt policy ipp-usb
ipp-usb:
  Installé : 0.9.20-1
  Candidat : 0.9.20-1
 Table de version :
 *** 0.9.20-1 500
        100 http://deb.debian.org/debian testing/main amd64 Packages
        500 http://deb.debian.org/debian unstable/main amd64 Packages
        100 /var/lib/dpkg/status
     0.9.17-3+b4 100
        100 http://deb.debian.org/debian stable/main amd64 Packages


i'm thinking about this : (temporary solution)

do you agree ?

what is your advice ?

alain@sid:~$ sudo aptitude -s install ipp-usb=0.9.17-3+b4
[sudo] Mot de passe de alain :
Les paquets suivants vont être RÉINSTALLÉS à une VERSION ANTÉRIEURE :
  ipp-usb
Les paquets suivants seront ENLEVÉS :
  hplip-data{u} libhpmud0{u} libsane-hpaio{u}
  printer-driver-postscript-hp{u} python3-dbus.mainloop.pyqt5{u}
  python3-notify2{u} python3-pexpect{u} python3-ptyprocess{u}
  python3-pyqt5{u} python3-pyqt5.sip{u} python3-renderpm{u}
  python3-reportlab{u} python3-reportlab-accel{u}
0 paquets mis à jour, 0 nouvellement installés, 1 remis à une version 
antérieure, 13 à enlever et 0 non mis à jour.
Il est nécessaire de télécharger 1 792 ko d'archives. Après dépaquetage, 
35,1 Mo seront libérés.

Note: Using 'Simulate' mode.
Voulez-vous continuer ? [Y/n/?] n
Abandon.


sudo apt-mark hold ipp-usb


what do you think about these commands ? (up)







Le 07/04/2022 à 21:35, Brian Potkin a écrit :
> On Thu 07 Apr 2022 at 20:36:45 +0200, alain wrote:
>
> > i've just gone to this thread :
> >
> >    https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=983349
> >
> > i saw interesting things but , apparently , nothing that applies to my
> > actual case .
> >
> > alain@sid:~$ sudo systemctl list-units "ipp-usb*" | grep service
> > [sudo] Mot de passe de alain :
> >    ipp-usb.service loaded active running Daemon for IPP over USB printer
> > support
> >
> >
> > alain@sid:~$ scanimage -L
> > device `hpaio:/usb/ENVY_5530_series?serial=CN595530XD06BX' is a
> > Hewlett-Packard ENVY_5530_series all-in-one
> >
> >
> > alain@sid:~$ apt policy sane-airscan hplip cups system-config-printer
> > ipp-usb
> > sane-airscan:
> >    Installé : 0.99.27-1
> >    Candidat : 0.99.27-1
> >   Table de version :
> >   *** 0.99.27-1 500
> >          100 http://deb.debian.org/debian testing/main amd64 Packages
> >          500 http://deb.debian.org/debian unstable/main amd64 Packages
> >          100 /var/lib/dpkg/status
> >       0.99.24-1 100
> >          100 http://deb.debian.org/debian stable/main amd64 Packages
> > hplip:
> >    Installé : (aucun)
> >    Candidat : 3.22.2+dfsg0-1
> >   Table de version :
> >       3.22.2+dfsg0-1 500
> >          500 http://deb.debian.org/debian unstable/main amd64 Packages
> >          100 /var/lib/dpkg/status
> >       3.21.12+dfsg0-1 100
> >          100 http://deb.debian.org/debian testing/main amd64 Packages
> >       3.21.2+dfsg1-2 100
> >          100 http://deb.debian.org/debian stable/main amd64 Packages
> > cups:
> >    Installé : 2.4.1op1-2
> >    Candidat : 2.4.1op1-2
> >   Table de version :
> >   *** 2.4.1op1-2 500
> >          100 http://deb.debian.org/debian testing/main amd64 Packages
> >          500 http://deb.debian.org/debian unstable/main amd64 Packages
> >          100 /var/lib/dpkg/status
> >       2.3.3op2-3+deb11u1 100
> >          100 http://deb.debian.org/debian stable/main amd64 Packages
> > system-config-printer:
> >    Installé : 1.5.16-1
> >    Candidat : 1.5.16-1
> >   Table de version :
> >   *** 1.5.16-1 500
> >          100 http://deb.debian.org/debian testing/main amd64 Packages
> >          100 http://deb.debian.org/debian testing/main i386 Packages
> >          500 http://deb.debian.org/debian unstable/main amd64 Packages
> >          500 http://deb.debian.org/debian unstable/main i386 Packages
> >          100 /var/lib/dpkg/status
> >       1.5.14-1 100
> >          100 http://deb.debian.org/debian stable/main amd64 Packages
> >          100 http://deb.debian.org/debian stable/main i386 Packages
> > ipp-usb:
> >    Installé : 0.9.20-1
> >    Candidat : 0.9.20-1
> >   Table de version :
> >   *** 0.9.20-1 500
> >          100 http://deb.debian.org/debian testing/main amd64 Packages
> >          500 http://deb.debian.org/debian unstable/main amd64 Packages
> >          100 /var/lib/dpkg/status
> >       0.9.17-3+b4 100
> >          100 http://deb.debian.org/debian stable/main amd64 Packages
> >
> >
> > alain@sid:~$ lsusb -v | grep -A 3 bInterfaceClass.*7
> > Couldn't open device, some information will be missing
> > Couldn't open device, some information will be missing
> > Couldn't open device, some information will be missing
> > Couldn't open device, some information will be missing
> >        bInterfaceClass         7 Printer
> >        bInterfaceSubClass      1 Printer
> >        bInterfaceProtocol      4
> >        iInterface              0
> > --
> >        bInterfaceClass         7 Printer
> >        bInterfaceSubClass      1 Printer
> >        bInterfaceProtocol      2 Bidirectional
> >        iInterface              0
> > --
> >        bInterfaceClass         7 Printer
> >        bInterfaceSubClass      1 Printer
> >        bInterfaceProtocol      4
> >        iInterface              0
> > Couldn't open device, some information will be missing
> > Couldn't open device, some information will be missing
> > --
> >        bInterfaceClass         7 Printer
> >        bInterfaceSubClass      1 Printer
> >        bInterfaceProtocol      4
> >        iInterface              0
> > Couldn't open device, some information will be missing
> > Couldn't open device, some information will be missing
> > Couldn't open device, some information will be missing
> > Couldn't open device, some information will be missing
> > Couldn't open device, some information will be missing
> >
> >
> > firefox http://127.0.0.1:60000
> >
> > gives :
> >
> > ipp-usb is not ready for this device
> The ipp-usb service is active but neither 'driverless' nor ippfind
> see the printer and sane-airscan does not appear to work. You also
> cannot access the web interface. I am lost!
>
> The message
>
>    ipp-usb is not ready for this device
>
> is coming from ipp-usb. It seems to me that this is the most important
> information you have supplied.
>
> I suggest you report this issue upsteam (give the error message).
>
>    https://github.com/OpenPrinting/ipp-usb/issues
>
> You will have to sign up to github.
>
> > these commands can help you ?
> They help me to guide you to expert help. But you have been very helpful
>
> Cheers,
>
> Brian