[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Problem getting my Crystal 4237b sound card to work

I've installed Debian GNU/Linux 3.1 Sarge on my laptop, a Dell
Latitude CPi D300XT.
I'm using kernel 2.6.8-1-686.
Everything's working as is should, except the sound card and the cd-rom.
Firstly I'm working on getting the sound card, which is a Crystal
4237b, to work.

Debian tries to use the driver cs4232. Well, it can output sound, but
it runs at 25% the speed it should. Think of it as running a 44khz wav
at 11khz. Sounds awful.
At http://free.vlsm.org/v17/au/csiro/datamining/debianbook/dlcpid300xt.html
I found info on configuring my computer for debian 2.1. I've tried
doing what he says (trying to use the cd4236 driver, adding text into
/etc/modules.conf), though it doesn't seem to work. I've found out
that there is no snd-card-cs4236.o on my system. There is, however, a
.o for cs4232 and a .ko for cs4232 and cs4236. Should it be like
that?. Doing what he said didn't change what my computer did at
startup. It still initializes cs4232. I've no idea how to make it
initialize 4236. I'm a linux newbie.

Any help appreciated!

Regards, Alexander Toresson

dmesg output:

Linux version 2.6.8-1-686 (dilinger@toaster.hq.voxel.net) (gcc version
3.3.4 (Debian 1:3.3.4-9)) #1 Sat Aug 28 14:11:39 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
BIOS-e820: 0000000000100000 - 0000000003ff0000 (usable)
BIOS-e820: 0000000003ff0000 - 0000000004000000 (ACPI data)
BIOS-e820: 00000000100a0000 - 0000000010100000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
63MB LOWMEM available.
On node 0 totalpages: 16368
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 12272 pages, LIFO batch:2
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
Dell Latitude with broken BIOS detected. Refusing to enable the local APIC.
ACPI: RSDP (v000 DELL ) @ 0x000f3cf0
ACPI: RSDT (v001 DELL CPi 0x27d10b07 ASL 0x00000061) @ 0x03ff0000
ACPI: FADT (v001 DELL CPi 0x27d10b07 ASL 0x00000061) @ 0x03ff0400
ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Built 1 zonelists
Kernel command line: root=/dev/hda3 ro
Initializing CPU#0
PID hash table entries: 256 (order 8: 2048 bytes)
Detected 300.798 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 57184k/65472k available (1542k kernel code, 7828k reserved,
684k data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 593.92 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel Pentium II (Deschutes) stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4600k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfbc7e, last bus=0
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: Power Resource [PADA] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fe2d0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe2f4, dseg 0x40
pnp: 00:01: ioport range 0x800-0x83f has been reserved
pnp: 00:01: ioport range 0x840-0x84f has been reserved
pnp: 00:01: ioport range 0x3f0-0x3f1 has been reserved
pnp: 00:02: ioport range 0xf400-0xf4fe has been reserved
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S3 S4 S4bios S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4600 blocks [1 disk] into ram disk...
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.02 loaded.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0860-0x0867, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0x0868-0x086f, BIOS settings: hdcMA, hddio
hda: IBM-DADA-26480, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 12685680 sectors (6495 MB) w/460KiB Cache, CHS=13424/15/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
hdc: Disabling (U)DMA for SAMSUNG CD-ROM SN-124 (blacklisted)
ide1 at 0x170-0x177,0x376 on irq 15
ide2: I/O resource 0x3EE-0x3EE not free.
ide2: ports already in use, skipping probe
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 393584k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda3, internal journal
Real Time Clock Driver v1.12
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
Capability LSM initialized
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
PCI: Enabling device 0000:00:03.0 (0000 -> 0002)
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:03.0 [1028:0074]
Yenta: ISA IRQ mask 0x0418, PCI irq 11
Socket status: 30000020
PCI: Enabling device 0000:00:03.1 (0000 -> 0002)
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:00:03.1 [1028:0074]
Yenta: ISA IRQ mask 0x0418, PCI irq 11
Socket status: 30000006
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp: pci dev 0000:01:00.0 (id 10ec:8139 rev 10) is not an 8139C+
compatible chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.27
PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:01:00.0 to 64
eth0: RealTek RTL8139 at 0x4000, 00:50:22:b9:63:ab, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
input: PC Speaker
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
NET: Registered protocol family 23
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
ad1848: No ISAPnP cards found, trying standard ones...
cs4232: set synthio and synthirq to use the wavefront facilities.
inserting floppy driver for 2.6.8-1-686
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
NET: Registered protocol family 17
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
uhci_hcd 0000:00:07.2: irq 11, io base 0000ece0
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using address 2
usbcore: registered new driver snd-usb-audio
cs: IO port probe 0x0100-0x04ff: excluding 0x210-0x217 0x220-0x22f
0x290-0x297 0x388-0x38f 0x4d0-0x4d7
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02fbd80(lo)
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present

lspci output:

0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (AGP disabled) (rev 02)
0000:00:02.0 VGA compatible controller: Neomagic Corporation NM2160
[MagicGraph 128XD] (rev 01)
0000:00:03.0 CardBus bridge: Texas Instruments PCI1131 (rev 01)
0000:00:03.1 CardBus bridge: Texas Instruments PCI1131 (rev 01)
0000:00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
0000:01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)

Reply to: