Re: Wireless and 2.6 status ?
On Thu, 2004-01-01 at 00:16, Xavier Maillard wrote:
> >
> > to this:
> > ===============================================
> > # Defaults for pcmcia (sourced by /etc/init.d/pcmcia)
> > PCMCIA=yes
> > PCIC=yenta_socket
> > PCIC_OPTS=
> > CORE_OPTS=
> > CARDMGR_OPTS=
> > ===============================================
That's the one I have nowadays.
> I have tried the 2 configurations above but still have problems. It
> seems to me that I have new problems. Now whenever I plug my WIFI card,
> I have messages like this:
>
> ,----
> | Dec 31 12:11:03 totoz cardmgr[1510]: socket 0: Linksys WPC11 11Mbps 802.11b WLAN Card
> | Dec 31 12:11:03 totoz kernel: orinoco_cs: RequestIRQ: Unsupported mode
> | Dec 31 12:11:04 totoz cardmgr[1510]: get dev info on socket 0 failed: Resource temporarily unavailable
> `----
You have disabled ISA Bus - you need to re-enable it.
> Maybe you can send to me either your /etc/pcmcia/config.opts and tell
> me how you did configure you WIFI card (using /etc/network/interfaces
> or using the built-in /etc/pcmcia/wireless.opts ?).
I use whereami (I wrote it). Essentially this uses
/etc/pcmcia/wireless.opts, but these have not changed for me to go from
2.4.23 -> 2.6.0.
> > The only problems I have had getting my WLAN to work with 2.6.0 so far
> > have been in disabling the ISA BUS support (hey, I won't need that
> > will I? Yup, you will). Once I re-enabled it everything is working
>
> I have removed ISA support from kernel too but obviously that didn't
> fix anything here.
Nononono! That's what you _shouldn't_ do :-(
Cheers,
Andrew.
-------------------------------------------------------------------------
Andrew @ Catalyst .Net .NZ Ltd, PO Box 11-053, Manners St, Wellington
WEB: http://catalyst.net.nz/ PHYS: Level 2, 150-154 Willis St
DDI: +64(4)916-7201 MOB: +64(21)635-694 OFFICE: +64(4)499-2267
Where are they now? http://schoolreunions.co.nz/
-------------------------------------------------------------------------
Reply to: