Bug#787794: lifimage fails to successfully boot on hppa
Here's the boot failure log taken from serial console using the latest
lifimage. By some reason HP SDC got enabled even with lifimage_mini
(i.e. equally same messages at the end) where you set "no_hpsdc=1" as
the default boot parameter.
When using lifimage.old or kernel on /boot partition, HP SDC is not
activated (or at least there are no messages from the driver).
Perhaps some false triggering? Wondering why no_hpsdc=1 doesn't disable it.
BOOT_ADMIN> b lan
Attempting to boot.
Loading Initial Program Loader
IPL successfully loaded
Booting
palo ipl 1.95 root@mkhppa3 Thu Apr 17 20:15:17 UTC 2014
Boot image contains:
0/vmlinux32 3356006(7871684) bytes @ 0xb800
0/vmlinux64 4311361(11930248) bytes @ 0x33f000
0/ramdisk 6757315 bytes @ 0x75c000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).
Command line for kernel: ' panic_timeout=60 panic=-1 mirror/protocol=http preseed/url=http://backup.parisc-linux.org/debian/preseed.cfg mirror/http/proxy__=http://proxy:8080 console=ttyS0 TERM=vt102 palo_kernel=0/vmlinux'
Selected kernel: /vmlinux from partition 0
Selected ramdisk: /initrd.gz from partition 0
Warning: kernel name doesn't end with 32 or 64 -- Guessing... Choosing 32-bit kerneluncompressing Linux kernel.................................................................................................................................................................................................................................................
ELF32 executable
Entry 00100000 first 00100000 n 2
Segment 0 load 00100000 size 158648 mediaptr 0x1000
Segment 1 load 00127000 size 6045124 mediaptr 0x28000
Loading ramdisk 6757315 bytes @ 0657d000...
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-parisc (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 Debian 3.16.7-ckt4-1 (2015-01-16)
[ 0.000000] unwind_init: start = 0x105e1a48, end = 0x106218b8, entries = 16359
[ 0.000000] FP[0] enabled: Rev 1 Model 13
[ 0.000000] The 32-bit Kernel has started...
[ 0.000000] Default page size is 4KB.
[ 0.000000] bootconsole [ttyB0] enabled
[ 0.000000] Initialized PDC Console for debugging.
[ 0.000000] Determining PDC firmware type: Snake.
[ 0.000000] model 00006020 00000481 00000000 00000000 77c2ca12 00000000 00000004 00000072 00000072
[ 0.000000] vers 0000000c
[ 0.000000] model 9000/712
[ 0.000000] Total Memory: 128 MB
[ 0.000000] initrd: 1657d000-16beebc3
[ 0.000000] initrd: reserving 0657d000-06beebc3 (mem_max 08000000)
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: panic_timeout=60 panic=-1 mirror/protocol=http preseed/url=http://backup.parisc-linux.org/debian/preseed.cfg mirror/http/proxy__=http://proxy:8080 console=ttyS0 TERM=vt102 palo_kernel=0/vmlinux
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 117064K/131072K available (3892K kernel code, 695K rwdata, 850K rodata, 256K init, 363K bss, 14008K reserved)
[ 0.000000] virtual kernel memory layout:
0.000000] vmalloc : 0x00810000 - 0x0f000000 ( 231 MB)
0.000000] memory : 0x10000000 - 0x18000000 ( 128 MB)
0.000000] .init : 0x10100000 - 0x10140000 ( 256 kB)
0.000000] .data : 0x1050d000 - 0x1068f9a0 (1546 kB)
0.000000] .text : 0x10140000 - 0x1050d000 (3892 kB)
[ 0.000000] NR_IRQS:96
[ 0.000000] Console: colour dummy device 160x64
[ 0.060000] Calibrating delay loop... 99.53 BogoMIPS (lpj=497664)
[ 0.176000] pid_max: default: 32768 minimum: 301
[ 0.236000] Security Framework initialized
[ 0.288000] AppArmor: AppArmor disabled by boot time parameter
[ 0.364000] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.444000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.528000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.624000] Initializing cgroup subsys memory
[ 0.680000] Initializing cgroup subsys devices
[ 0.736000] Initializing cgroup subsys freezer
[ 0.792000] Initializing cgroup subsys net_cls
[ 0.848000] Initializing cgroup subsys blkio
[ 0.904000] Initializing cgroup subsys perf_event
[ 0.964000] Initializing cgroup subsys net_prio
[ 1.036000] devtmpfs: initialized
[ 1.092000] NET: Registered protocol family 16
[ 1.196000] Searching for devices...
[ 1.340000] Found devices:
[ 1.376000] 1. Gecko 100 GSC Core Graphics at 0xf8000000 [1] { 10, 0x0, 0x01d, 0x00085 }
[ 1.480000] 2. Gecko 100 Core BA at 0xf0100000 [2] { 11, 0x0, 0x01d, 0x00081 }
[ 1.572000] 3. Gecko 100 Core SCSI at 0xf0106000 [2/0/1] { 10, 0x0, 0x01d, 0x00082 }
[ 1.668000] 4. Gecko 100 Core LAN (802.3) at 0xf0107000 [2/0/2] { 10, 0x0, 0x01d, 0x0008a }
[ 1.776000] 5. Gecko 100 Core RS-232 at 0xf0105000 [2/0/4] { 10, 0x0, 0x01d, 0x0008c }
[ 1.876000] 6. Gecko 100 Core Centronics at 0xf0102000 [2/0/6] { 10, 0x0, 0x01d, 0x00074 }
[ 1.980000] 7. Gecko 100 Audio at 0xf0104000 [2/0/8] { 10, 0x0, 0x01d, 0x0007b }
[ 2.072000] 8. Gecko 100 Core PC Floppy at 0xf010a000 [2/0/10] { 10, 0x0, 0x01d, 0x00083 }
[ 2.176000] 9. Gecko 100 Core PS/2 Port at 0xf0108000 [2/0/11] { 10, 0x0, 0x01d, 0x00084 }
[ 2.280000] 10. Gecko 100 Core PS/2 Port at 0xf0108100 [2/0/12] { 10, 0x0, 0x01d, 0x00084 }
[ 2.384000] 11. Gecko 100 Core BA at 0xf0500000 [6] { 11, 0x0, 0x01d, 0x00081 }
[ 2.484000] 12. Gecko 100 (712/100) at 0xfffbe000 [8] { 0, 0x0, 0x602, 0x00004 }
[ 2.844000] 13. Memory at 0xfffbf000 [9] { 1, 0x0, 0x039, 0x00009 }
[ 2.920000] Enabling regular chassis codes support v0.05
[ 3.040000] CPU(s): 1 x PA7100LC (PCX-L) at 100.000000 MHz
[ 3.120000] Setting cache flush threshold to 8c0 (1 CPUs online)
[ 3.196000] Lasi version 0 at 0xf0100000 found.
[ 3.640000] powersw: Gecko-style soft power switch enabled.
[ 3.756000] vgaarb: loaded
[ 3.800000] Switched to clocksource cr16
[ 3.936000] NET: Registered protocol family 2
[ 4.000000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 4.088000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 4.168000] TCP: Hash tables configured (established 1024 bind 1024)
[ 4.248000] TCP: reno registered
[ 4.288000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 4.364000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 4.444000] NET: Registered protocol family 1
[ 4.500000] Unpacking initramfs...
[ 10.220000] Freeing initrd memory: 6596K (1657d000 - 16bee000)
[ 10.296000] Chassis warnings not supported.
[ 10.352000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 10.432000] audit: initializing netlink subsys (disabled)
[ 10.500000] audit: type=2000 audit(2075272551.496:1): initialized
[ 10.580000] zbud: loaded
[ 10.616000] VFS: Disk quotas dquot_6.5.2
[ 10.664000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 10.748000] msgmni has been set to 241
[ 10.812000] alg: No test for stdrng (krng)
[ 10.864000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 10.960000] io scheduler noop registered
[ 11.008000] io scheduler deadline registered
[ 11.064000] io scheduler cfq registered (default)
[ 11.176000] PDC Stable Storage facility v0.30
[ 11.256000] STI GSC/PCI core graphics driver Version 0.9b
[ 11.332000] STI ROM supports 32 bit firmware functions.
[ 11.396000] STI selected 8x16 framebuffer font VGA8x16 for sticon
[ 11.476000] id 2b4ded6d-40a00499, conforms to spec rev. 8.04
[ 11.552000] graphics card name: HPA208LC1280
[ 11.612000] sticon: Initializing STI text console.
[ 11.672000] Console: switching to colour STI console 160x64
[ 12.056000] Console: switching to colour frame buffer device 160x64
[ 12.240000] fb0: stifb 1280x1024-8 frame buffer device, HPA208LC1280, id: 2b4ded6d, mmio: 0xf8100000
[ 12.356000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 12.448000] console [ttyS0] disabled
[ 12.516000] 2:0:4: ttyS0 at MMIO 0xf0105800 (irq = 18, base_baud = 454545) is a 16550A
[ 12.616000] console [ttyS0] enabled
[ 12.616000] console [ttyS0] enabled
[ 12.700000] bootconsole [ttyB0] disabled
[ 12.700000] bootconsole [ttyB0] disabled
[ 12.824000] 5:0:2: ttyS1 at MMIO 0xf0202800 (irq = 25, base_baud = 454545) is a 16550A
[ 12.924000] serio: gsc-ps2-keyboard port at 0x0081e000 irq 22 @ 2:0:11
[ 13.004000] serio: gsc-ps2-mouse port at 0x00820100 irq 22 @ 2:0:12
[ 13.084000] mousedev: PS/2 mouse device common for all mice
[ 13.160000] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 13.288000] input: AT Raw Set 2 keyboard as /devices/parisc/2/2:0/2:0:11/serio0/input/input0
[ 13.468000] TCP: cubic registered
[ 13.508000] NET: Registered protocol family 10
[ 13.572000] mip6: Mobile IPv6
[ 13.608000] NET: Registered protocol family 17
[ 13.660000] mpls_gso: MPLS GSO support
[ 13.712000] registered taskstats version 1
[ 13.764000] rtc-generic rtc-generic: setting system clock to 2035-10-06 08:35:54 UTC (2075272554)
[ 13.880000] Freeing unused kernel memory: 256K (10100000 - 10140000)
[ 14.404000] systemd-udevd[39]: starting version 215
[ 14.560000] random: systemd-udevd urandom read with 33 bits of entropy available
[ 15.472000] LASI 82596 driver - Revision: 1.30
[ 15.692000] HP SDC: HP SDC reports successful PUP.
[ 16.004000] Found i82596 at 0xf0107000, IRQ 17
[ 16.188000] HP SDC: HP SDC at 0xf0201000, IRQ 23 (NMI IRQ 24)
[ 16.448000] eth0: 82596 at 0xf0107000, 00:60:b0:21:64:a1 IRQ 17.
[ 16.680000] HP SDC: New style SDC
[ 16.932000] HP SDC: Revision: 1820-4784
[ 16.980000] HP SDC: TI SN76494 beeper present
[ 17.032000] HP SDC: OKI MSM-58321 BBRTC present
[ 17.084000] HP SDC: Spunking the self test register to force PUP on next firmware reset.
[ 18.828000] HP SDC MLC: Registering the System Domain Controller's HIL MLC.
[ 19.048000] HP SDC: Transaction add failed: transaction already queued?
[ 19.128000] HP SDC: Transaction add failed: transaction already queued?
[ 19.208000] HP SDC: Transaction add failed: transaction already queued?
[ 19.288000] HP SDC: Transaction add failed: transaction already queued?
[ 19.368000] HP SDC: Transaction add failed: transaction already queued?
[ 19.448000] HP SDC: Transaction add failed: transaction already queued?
[ 19.528000] HP SDC: Transaction add failed: transaction already queued?
[ 19.604000] HP SDC: Transaction add failed: transaction already queued?
[ 19.684000] HP SDC: Transaction add failed: transaction already queued?
[ 19.764000] HP SDC: Transaction add failed: transaction already queued?
[ 19.844000] HP SDC: Transaction add failed: transaction already queued?
[ 19.924000] HP SDC: Transaction add failed: transaction already queued?
[ 20.004000] HP SDC: Transaction add failed: transaction already queued?
[ 20.080000] HP SDC: Transaction add failed: transaction already queued?
[ 20.160000] HP SDC: Transaction add failed: transaction already queued?
[ 20.240000] HP SDC: Transaction add failed: transaction already queued?
[ 20.320000] HP SDC: Transaction add failed: transaction already queued?
[ 20.400000] HP SDC: Transaction add failed: transaction already queued?
[ 20.480000] HP SDC: Transaction add failed: transaction already queued?
[ 20.560000
Reply to: