Bug#787794: lifimage fails to successfully boot on hppa
Helge Deller <deller@gmx.de>:
> On 08.06.2015 16:07, wrote:
>>
>> Anyway, since I have an installed working Debian 8 sid on this
>> machine, should I gzip the kernel and try to boot it to see whether
>> this issue occurs in non-netboot case too?
>
>
> Yes, please.
> And send the dmesg log of the sucessful boot.
>
Tried few times, boots fine, though always the message 'seekread()
returned 2048 expected 8192' on gzipped kernel.
Attached the dmesg.
Thanks.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.0-2-parisc (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-18) ) #1 Debian 4.0.4-1 (2015-05-27)
[ 0.000000] unwind_init: start = 0x105fdfe8, end = 0x10640008, entries = 16898
[ 0.000000] FP[0] enabled: Rev 1 Model 13
[ 0.000000] The 32-bit Kernel has started...
[ 0.000000] Default page size is 4KB.
[ 0.000000] bootconsole [ttyB0] enabled
[ 0.000000] Initialized PDC Console for debugging.
[ 0.000000] Determining PDC firmware type: Snake.
[ 0.000000] model 00006020 00000481 00000000 00000000 77c2ca12 00000000 00000004 00000072 00000072
[ 0.000000] vers 0000000c
[ 0.000000] model 9000/712
[ 0.000000] Total Memory: 128 MB
[ 0.000000] initrd: 15d2a000-16bee022
[ 0.000000] initrd: reserving 05d2a000-06bee022 (mem_max 08000000)
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat 10683f60, node_mem_map 10720000
[ 0.000000] Normal zone: 288 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32480
[ 0.000000] Kernel command line: HOME=/ TERM=linux root=/dev/sda5 rootfstype=ext3 console=tty0 sti=1 sti_font=VGA8x16 palo_kernel=2/vmlinuz
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 108204K/131072K available (4028K kernel code, 766K rwdata, 827K rodata, 256K init, 384K bss, 22868K reserved, 0K cma-reserved)
[ 0.000000] virtual kernel memory layout:
vmalloc : 0x00810000 - 0x0f000000 ( 231 MB)
memory : 0x10000000 - 0x18000000 ( 128 MB)
.init : 0x10100000 - 0x10140000 ( 256 kB)
.data : 0x1052f000 - 0x106bdb20 (1594 kB)
.text : 0x10140000 - 0x1052f000 (4028 kB)
[ 0.000000] NR_IRQS:96
[ 0.004000] Console: colour dummy device 160x64
[ 0.036000] console [tty0] enabled
[ 0.068000] bootconsole [ttyB0] disabled
[ 0.100000] Calibrating delay loop... 99.53 BogoMIPS (lpj=497664)
[ 0.148000] pid_max: default: 32768 minimum: 301
[ 0.148000] Security Framework initialized
[ 0.148000] AppArmor: AppArmor disabled by boot time parameter
[ 0.148000] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.148000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.148000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.156000] Initializing cgroup subsys blkio
[ 0.156000] Initializing cgroup subsys memory
[ 0.156000] Initializing cgroup subsys devices
[ 0.156000] Initializing cgroup subsys freezer
[ 0.156000] Initializing cgroup subsys net_cls
[ 0.156000] Initializing cgroup subsys perf_event
[ 0.156000] Initializing cgroup subsys net_prio
[ 0.176000] devtmpfs: initialized
[ 0.196000] NET: Registered protocol family 16
[ 0.200000] EISA bus registered
[ 0.204000] Searching for devices...
[ 0.304000] Found devices:
[ 0.304000] 1. Gecko 100 GSC Core Graphics at 0xf8000000 [1] { 10, 0x0, 0x01d, 0x00085 }
[ 0.304000] 2. Gecko 100 Core BA at 0xf0100000 [2] { 11, 0x0, 0x01d, 0x00081 }
[ 0.304000] 3. Gecko 100 Core SCSI at 0xf0106000 [2/0/1] { 10, 0x0, 0x01d, 0x00082 }
[ 0.304000] 4. Gecko 100 Core LAN (802.3) at 0xf0107000 [2/0/2] { 10, 0x0, 0x01d, 0x0008a }
[ 0.304000] 5. Gecko 100 Core RS-232 at 0xf0105000 [2/0/4] { 10, 0x0, 0x01d, 0x0008c }
[ 0.304000] 6. Gecko 100 Core Centronics at 0xf0102000 [2/0/6] { 10, 0x0, 0x01d, 0x00074 }
[ 0.304000] 7. Gecko 100 Audio at 0xf0104000 [2/0/8] { 10, 0x0, 0x01d, 0x0007b }
[ 0.304000] 8. Gecko 100 Core PC Floppy at 0xf010a000 [2/0/10] { 10, 0x0, 0x01d, 0x00083 }
[ 0.304000] 9. Gecko 100 Core PS/2 Port at 0xf0108000 [2/0/11] { 10, 0x0, 0x01d, 0x00084 }
[ 0.304000] 10. Gecko 100 Core PS/2 Port at 0xf0108100 [2/0/12] { 10, 0x0, 0x01d, 0x00084 }
[ 0.304000] 11. Gecko 100 Core BA at 0xf0500000 [6] { 11, 0x0, 0x01d, 0x00081 }
[ 0.308000] 12. Gecko 100 (712/100) at 0xfffbe000 [8] { 0, 0x0, 0x602, 0x00004 }
[ 0.308000] 13. Memory at 0xfffbf000 [9] { 1, 0x0, 0x039, 0x00009 }
[ 0.308000] Enabling regular chassis codes support v0.05
[ 0.360000] CPU(s): 1 x PA7100LC (PCX-L) at 100.000000 MHz
[ 0.372000] Whole cache flush 44925 cycles, flushing 6152920 bytes 690554 cycles
[ 0.372000] Setting cache flush threshold to 8c0 (1 CPUs online)
[ 0.372000] Lasi version 0 at 0xf0100000 found.
[ 0.388000] powersw: Gecko-style soft power switch enabled.
[ 0.436000] vgaarb: loaded
[ 0.444000] Switched to clocksource cr16
[ 0.532000] NET: Registered protocol family 2
[ 0.540000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.540000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.540000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.544000] TCP: reno registered
[ 0.544000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.544000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.544000] NET: Registered protocol family 1
[ 0.548000] Unpacking initramfs...
[ 13.032000] Freeing initrd memory: 15120K (15d2a000 - 16bee000)
[ 13.036000] Chassis warnings not supported.
[ 13.040000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 13.040000] audit: initializing netlink subsys (disabled)
[ 13.044000] audit: type=2000 audit(2075152978.036:1): initialized
[ 13.048000] zpool: loaded
[ 13.052000] VFS: Disk quotas dquot_6.5.2
[ 13.052000] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 13.072000] alg: No test for stdrng (krng)
[ 13.072000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 13.076000] io scheduler noop registered
[ 13.076000] io scheduler deadline registered
[ 13.080000] io scheduler cfq registered (default)
[ 13.088000] PDC Stable Storage facility v0.30
[ 13.112000] STI GSC/PCI core graphics driver Version 0.9b
[ 13.120000] STI ROM supports 32 bit firmware functions.
[ 13.124000] STI selected 8x16 framebuffer font VGA8x16 for sticon
[ 13.124000] id 2b4ded6d-40a00499, conforms to spec rev. 8.04
[ 13.124000] graphics card name: HPA208LC1280
[ 13.128000] sticon: Initializing STI text console.
[ 13.128000] Console: switching to colour STI console 160x64
[ 13.476000] Console: switching to colour frame buffer device 160x64
[ 13.620000] fb0: stifb 1280x1024-8 frame buffer device, HPA208LC1280, id: 2b4ded6d, mmio: 0xf8100000
[ 13.664000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 13.736000] 2:0:4: ttyS0 at MMIO 0xf0105800 (irq = 18, base_baud = 454545) is a 16550A
[ 13.804000] 5:0:2: ttyS1 at MMIO 0xf0202800 (irq = 25, base_baud = 454545) is a 16550A
[ 13.852000] serio: gsc-ps2-keyboard port at 0x0081a000 irq 22 @ 2:0:11
[ 13.896000] serio: gsc-ps2-mouse port at 0x0081c100 irq 22 @ 2:0:12
[ 13.944000] mousedev: PS/2 mouse device common for all mice
[ 13.992000] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
[ 14.072000] input: AT Raw Set 2 keyboard as /devices/parisc/2/2:0/2:0:11/serio0/input/input0
[ 14.164000] TCP: cubic registered
[ 14.208000] NET: Registered protocol family 10
[ 14.256000] mip6: Mobile IPv6
[ 14.296000] NET: Registered protocol family 17
[ 14.336000] mpls_gso: MPLS GSO support
[ 14.384000] registered taskstats version 1
[ 14.424000] rtc-generic rtc-generic: setting system clock to 2035-10-04 23:22:59 UTC (2075152979)
[ 14.476000] Freeing unused kernel memory: 256K (10100000 - 10140000)
[ 15.396000] systemd-udevd[53]: starting version 215
[ 15.536000] random: systemd-udevd urandom read with 57 bits of entropy available
[ 16.384000] LASI 82596 driver - Revision: 1.30
[ 16.764000] Found i82596 at 0xf0107000, IRQ 17
[ 16.968000] SCSI subsystem initialized
[ 17.108000] eth0: 82596 at 0xf0107000, 00:60:B0:21:64:a1 IRQ 17.
[ 17.524000] 53c700: Version 2.8 By James.Bottomley@HansenPartnership.com
[ 17.568000] scsi0: 53c710 rev 2
[ 18.612000] scsi host0: LASI SCSI 53c700
[ 20.000000] scsi 0:0:0:0: Direct-Access FUJITSU MAB3091SP 0109 PQ: 0 ANSI: 2
[ 20.052000] scsi target0:0:0: Beginning Domain Validation
[ 20.096000] scsi 0:0:0:0: tag#0 Enabling Tag Command Queuing
[ 20.136000] scsi target0:0:0: asynchronous
[ 20.184000] scsi target0:0:0: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8)
[ 20.232000] scsi target0:0:0: Domain Validation skipping write tests
[ 20.272000] scsi target0:0:0: Ending Domain Validation
[ 20.316000] scsi 0:0:0:1: tag#0 Disabling Tag Command Queuing
[ 22.484000] sd 0:0:0:0: [sda] 17824700 512-byte logical blocks: (9.12 GB/8.49 GiB)
[ 22.600000] sd 0:0:0:0: [sda] Write Protect is off
[ 22.640000] sd 0:0:0:0: [sda] Mode Sense: a7 00 00 08
[ 22.688000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 22.896000] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 22.972000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 23.064000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 23.464000] random: nonblocking pool is initialized
[ 28.720000] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[ 28.876000] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 48.308000] Adding 356348k swap on /dev/sda6. Priority:-1 extents:1 across:356348k FS
[ 49.752000] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 51.992000] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 66.928000] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 67.004000] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 78.560000] eth0: link ok.
Reply to: