Re: SATA don't inicialize
On Sat, 2 Oct 2004 11:55:20 -0400, Joey Hess <joeyh@debian.org> wrote:
> Panquekas wrote:
> > It says:
> > "Linux Kernel modules needed to drive some of your hardware are not
> > available yet. Simply proceeding with the install may make these
> > modules available later.
> >
> > the unvailable modules, and the devices that need them are: i810-tco
> > (Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Bridge), e100 (Intel
> > Corporation 82562EZ 10/100 Ethernet Controller), ide-mod (Linux IDE
> > driver), ide-probe-mod (Linux IDE probe driver), ide-detect (Linux IDE
> > detection), ide-floppy (Linux IDE floppy)"
>
> This warning message has nothing to do with your problem.
>
> > And I can't use my hard drive :\ it's not a good thing.. because I use
> > debian more then an year and I never had problem's! Just in the
> > beginning in the old installer! but it was user problem not the distro
>
> Perhaps if you tell us what SATA controller you have and provide lspci
> and lspci -n output for your system we can see why it's not loading the
> module.
>
> --
> see shy jo
>
>
I think it is because if I don't have the module to my controller I
don't have access to my drive so I can't install.. but here it is the
lspci and lspci -n:
$ lspci
0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 02)
0000:00:06.0 System peripheral: Intel Corp. 82875P Processor to I/O
Memory Interface (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #3 (rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #4 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra
ATA 100 Storage Controller (rev 02)
0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150
Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus
Controller (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 NJ
[Radeon 9800 XT]
0000:01:00.1 Display controller: ATI Technologies Inc RV350 NJ [Radeon
9800 XT] (Secondary)
0000:02:01.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
0000:02:01.1 Input device controller: Creative Labs SB Audigy
MIDI/Game port (rev 04)
0000:02:01.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire
Port (rev 04)
0000:02:08.0 Ethernet controller: Intel Corp. 82562EZ 10/100 Ethernet
Controller (rev 02)
$ lspci -n
0000:00:00.0 0600: 8086:2578 (rev 02)
0000:00:01.0 0604: 8086:2579 (rev 02)
0000:00:06.0 0880: 8086:257e (rev 02)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
0000:00:1d.3 0c03: 8086:24de (rev 02)
0000:00:1d.7 0c03: 8086:24dd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.1 0101: 8086:24db (rev 02)
0000:00:1f.2 0101: 8086:24d1 (rev 02)
0000:00:1f.3 0c05: 8086:24d3 (rev 02)
0000:01:00.0 0300: 1002:4e4a
0000:01:00.1 0380: 1002:4e6a
0000:02:01.0 0401: 1102:0004 (rev 04)
0000:02:01.1 0980: 1102:7003 (rev 04)
0000:02:01.2 0c00: 1102:4001 (rev 04)
0000:02:08.0 0200: 8086:1050 (rev 02)
$
Oh and by the way I have an USB KeyBoard and in the installation I
select USB KeyBoard and Portuguese KeyBoard we gives me and error:
kbd-choose [1377]: Debug: mounting usbdevfs to look for kbd
kbd-choose [1377]: Info: KeyBoard type at: present: false
kbd-choose [1377]: Info: KeyBoard type usb: present: unkonwn
kbd-choose [1377]: Info: Setting debian-installer/serial-console to false
kbd-choose [1377]: Info: Setting debian-installer/uml-console to false
kbd-choose [1377]: Info: choose_keymap: keymap = mac-usb-pt-latin1
kbd-choose [1377]: Info: kbd_chooser: setting keymap mac-usb-pt-latin1
main-menu [508]: (process 1375): Segmentation fault
main-menu [508]: Warning **: Configuring `kbd-chooser` failed with
error code 139
main-menu [508]: Warning **: menu item `kbd-chooser` failed
init: ^MStarting pid 372, console /dev/vc/2: `/bin/sh`
I think it's good to view this too..
Thnk for the help, Joey Hess! :)
Reply to: