Bug#274559: installation report
Package: installation-reports
INSTALL REPORT
Debian-installer-version: RC1
uname -a:
Linux callisto 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT 2004 i686 GNU/Linux
Method: How did you install? What did you boot off? If network
install, from where? Proxied?
Downloaded netinst iso, booted from CD and installed using the linux26
image.
Machine: Inspiron 5100
Processor: 2.6GHz Pentium 4
Memory: 512MB
Root Device: 40GB IDE HDD on /dev/hdc
Root Size/partition table: Feel free to paste the full partition
table, with notes on which partitions are mounted where.
Partition Table for /dev/hdc
---Starting--- ----Ending---- Start Number of
Mount
# Flags Head Sect Cyl ID Head Sect Cyl Sector Sectors
Point
-- ----- ---- ---- ---- ---- ---- ---- ---- ----------- -----------
---------
1 0x00 1 1 0 0x83 15 63 290 63 293265
/boot
2 0x00 0 1 291 0x82 15 63 1023 293328 1999872
3 0x80 15 63 1023 0x83 15 63 1023 2293200 36913968 /
4 0x00 15 63 1023 0x83 15 63 1023 39207168 38932992
/home
Output of lspci and lspci -n:
lspci
-----
0000:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM
Controller/Host-Hub Interface (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE
Host-to-AGP Bridge (rev 02)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB
2.0 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 82)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC
Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L)
UltraATA-100 IDE Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller (rev 02)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon
Mobility M7 LW [Radeon Mobility 7500]
0000:02:01.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T
(rev 01)
0000:02:04.0 CardBus bridge: Texas Instruments PCI4510 PC card Cardbus
Controller (rev 02)
0000:02:04.1 FireWire (IEEE 1394): Texas Instruments PCI4510 IEEE-1394
Controller
lspci -n
--------
0000:00:00.0 0600: 8086:2560 (rev 02)
0000:00:01.0 0604: 8086:2561 (rev 02)
0000:00:1d.0 0c03: 8086:24c2 (rev 02)
0000:00:1d.1 0c03: 8086:24c4 (rev 02)
0000:00:1d.2 0c03: 8086:24c7 (rev 02)
0000:00:1d.7 0c03: 8086:24cd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev 82)
0000:00:1f.0 0601: 8086:24c0 (rev 02)
0000:00:1f.1 0101: 8086:24cb (rev 02)
0000:00:1f.5 0401: 8086:24c5 (rev 02)
0000:00:1f.6 0703: 8086:24c6 (rev 02)
0000:01:00.0 0300: 1002:4c57
0000:02:01.0 0200: 14e4:4401 (rev 01)
0000:02:04.0 0607: 104c:ac44 (rev 02)
0000:02:04.1 0c00: 104c:8029
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
DHCP Autoconfiguration failed on the first invocation. I was able to get
it
to work by simply invoking it again. I was able to reproduce the
behavior
consistently over the course of several runs of the installer.
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
Overall this is a very solid piece of software. From a purely aesthetic
standpoint, I found the disk partitioning to be a bit cumbersome. I
would
have been more comfortable if the installer switched into cfdisk in the
same
way as the old installer did. That nit-picky detail aside its a great
improvement. Great Job!
Install logs and other status info is available in
/var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.
Reply to: