Re: XF86 4.2.1 and Diamond Stealth 3D 2000 with Diamond Monster II 3D expansion card
> Sorry for asking, but _where_ and how should I change my BusID? In the
> XF86Config-4 file, or is there a way to give a PCI-Bus another ID?
> If I need to change it in the XF86Config-4, what excactly do I have to insert? I
>
> alread tried several formats (like PCI 0:3:0 ; PCI:00:03:0...)
>
> Output of lspci is:
>
> 00:00.0 Host bridge: Acer Laboratories Inc. [ALi] M1445
> 00:03.0 Multimedia video controller: 3Dfx Interactive, Inc. Voodoo 2 (rev 02)
> 00:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev
>
> 10)
> 00:05.0 VGA compatible controller: S3 Inc. 86c325 [ViRGE] (rev 02)
>
> lspci -n:
>
> 00:00.0 Class 0600: 10b9:1445
> 00:03.0 Class 0400: 121a:0002 (rev 02)
> 00:04.0 Class 0200: 10ec:8139 (rev 10)
> 00:05.0 Class 0300: 5333:5631 (rev 02)
>
> Thank you in advance
>
> Lucia
>
> Jsen wrote:
>
> > Try changing your BusID, I had that problem once. To confirm just do a
> > "lspci -n"
> >
> > Good Luck.
> >
> > * Lucia Cosima Eiselstein (Lucia@Eiselstein.de) wrote:
> >
> > > > Do you have the libglide2 package installed?
> > > >
> > >
> > > Yes, I have. Do I have to do something else after installing the
> > > deb-package? Following "man glide", I figured out that
> > > /usr/X11R6/lib/modules/libglide2x.so is a link to /usr/lib/libglide.so.2,
> not
> > > to /usr/lib/libglide2x.so how it should be. Changed that, changed the device
>
> > > section to:
> > >
> > > Section "Device"
> > > Identifier "Diamond MonsterII"
> > > Driver "glide"
> > > Option "dpms" "on"
> > > # BusID "PCI:00:03:02"
> > > BusID "PCI:0:3:0"
> > > EndSection
> > >
> > > Still the same result and log, here the last lines:
> > >
> > > (II) LoadModule: "glide"
> > > (II) Loading /usr/X11R6/lib/modules/drivers/glide_drv.o
> > > (II) Module glide: vendor="The XFree86 Project"
> > > compiled for 4.2.1, module version = 1.0.0
> > > Module class: XFree86 Video Driver
> > > ABI class: XFree86 Video Driver, version 0.5
> > > (II) Loading sub module "glide2x"
> > > (II) LoadModule: "glide2x"
> > > (II) Loading /usr/X11R6/lib/modules/libglide2x.so
> > > (II) LoadModule: "mouse"
> > > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> > > (II) Module mouse: vendor="The XFree86 Project"
> > > compiled for 4.2.1, module version = 1.0.0
> > > Module class: XFree86 XInput Driver
> > > ABI class: XFree86 XInput driver, version 0.3
> > > (II) GLIDE: driver for Glide devices (Voodoo cards): Voodoo
> > > (II) Primary Device is: PCI 00:05:0
> > > (EE) No devices detected.
> > >
> > > Fatal server error:
> > > no screens found
> > >
> > >
> > > It_s interesting that I wrote in the XF86Config-4 in the device section:
> > > BusID "PCI:0:3:0"
> > > but in the logfile, X recognizes:
> > > (II) Primary Device is: PCI 00:05:0
> > > Is this right?
> > > PCI 00:05:0 is the Diamond Stealth 3d 2000 card, not the expansion card.
> > >
> > > If needed, I'll send the whole logs and XF86Config again.
> >
>
>
Reply to: