Re: XF86 4.2.1 and Diamond Stealth 3D 2000 with Diamond Monster II 3D expansion card
ignore the -n, ;)
* Jsen (jsenhxc@phreaker.net) wrote:
> Try changing your BusID, I had that problem once. To confirm just do a
> "lspci -n"
>
> Good Luck.
>
> * Lucia Cosima Eiselstein (Lucia@Eiselstein.de) wrote:
> > Branden Robinson wrote:
> >
> > > On Wed, Jan 29, 2003 at 07:18:12PM +0100, Lucia Cosima Eiselstein wrote:
> > > > I just tried to set up XFree86 4.2.1-3 with a Diamond Stealth 3D 2000
> > > > card and a Diamond Monster II 3D expansion card.
> > > > At the moment I'm struggling with the problems described in the logfile,
> > > > attached to this e-mail. X doesn't want to start up, only gives the
> > > > error messages
> > > >
> > > > "(EE) No devices detected.
> > > >
> > > > Fatal server error:
> > > > no screens found"
> > > >
> > > > Hope that someone can help me and my somehow old hardware.
> > >
> > > Do you have the libglide2 package installed?
> > >
> >
> > Yes, I have. Do I have to do something else after installing the
> > deb-package? Following "man glide", I figured out that
> > /usr/X11R6/lib/modules/libglide2x.so is a link to /usr/lib/libglide.so.2, not
> > to /usr/lib/libglide2x.so how it should be. Changed that, changed the device
> > section to:
> >
> > Section "Device"
> > Identifier "Diamond MonsterII"
> > Driver "glide"
> > Option "dpms" "on"
> > # BusID "PCI:00:03:02"
> > BusID "PCI:0:3:0"
> > EndSection
> >
> > Still the same result and log, here the last lines:
> >
> > (II) LoadModule: "glide"
> > (II) Loading /usr/X11R6/lib/modules/drivers/glide_drv.o
> > (II) Module glide: vendor="The XFree86 Project"
> > compiled for 4.2.1, module version = 1.0.0
> > Module class: XFree86 Video Driver
> > ABI class: XFree86 Video Driver, version 0.5
> > (II) Loading sub module "glide2x"
> > (II) LoadModule: "glide2x"
> > (II) Loading /usr/X11R6/lib/modules/libglide2x.so
> > (II) LoadModule: "mouse"
> > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> > (II) Module mouse: vendor="The XFree86 Project"
> > compiled for 4.2.1, module version = 1.0.0
> > Module class: XFree86 XInput Driver
> > ABI class: XFree86 XInput driver, version 0.3
> > (II) GLIDE: driver for Glide devices (Voodoo cards): Voodoo
> > (II) Primary Device is: PCI 00:05:0
> > (EE) No devices detected.
> >
> > Fatal server error:
> > no screens found
> >
> >
> > It_s interesting that I wrote in the XF86Config-4 in the device section:
> > BusID "PCI:0:3:0"
> > but in the logfile, X recognizes:
> > (II) Primary Device is: PCI 00:05:0
> > Is this right?
> > PCI 00:05:0 is the Diamond Stealth 3d 2000 card, not the expansion card.
> >
> > If needed, I'll send the whole logs and XF86Config again.
> >
> > Best regards
> >
> > Lucia Cosima Eiselstein
> >
> >
> > --
> > To UNSUBSCRIBE, email to debian-x-request@lists.debian.org
> > with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
> Regards,
> Jsen
>
> ---
> .--------------------------------------.
> | Jsen |
> | http://arsha.ne1.net |
> | http://www.m0sh.net |
> | Wanting To Die Is Your Reason To Live|
> "--------------------------------------'
>
>
>
>
> --
> To UNSUBSCRIBE, email to debian-x-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Regards,
Jsen
---
.--------------------------------------.
| Jsen |
| http://arsha.ne1.net |
| http://www.m0sh.net |
| Wanting To Die Is Your Reason To Live|
"--------------------------------------'
Reply to: