Re: XF86 4.2.1 and Diamond Stealth 3D 2000 with Diamond Monster II 3D expansion card
Branden Robinson wrote:
> On Wed, Jan 29, 2003 at 07:18:12PM +0100, Lucia Cosima Eiselstein wrote:
> > I just tried to set up XFree86 4.2.1-3 with a Diamond Stealth 3D 2000
> > card and a Diamond Monster II 3D expansion card.
> > At the moment I'm struggling with the problems described in the logfile,
> > attached to this e-mail. X doesn't want to start up, only gives the
> > error messages
> >
> > "(EE) No devices detected.
> >
> > Fatal server error:
> > no screens found"
> >
> > Hope that someone can help me and my somehow old hardware.
>
> Do you have the libglide2 package installed?
>
Yes, I have. Do I have to do something else after installing the
deb-package? Following "man glide", I figured out that
/usr/X11R6/lib/modules/libglide2x.so is a link to /usr/lib/libglide.so.2, not
to /usr/lib/libglide2x.so how it should be. Changed that, changed the device
section to:
Section "Device"
Identifier "Diamond MonsterII"
Driver "glide"
Option "dpms" "on"
# BusID "PCI:00:03:02"
BusID "PCI:0:3:0"
EndSection
Still the same result and log, here the last lines:
(II) LoadModule: "glide"
(II) Loading /usr/X11R6/lib/modules/drivers/glide_drv.o
(II) Module glide: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "glide2x"
(II) LoadModule: "glide2x"
(II) Loading /usr/X11R6/lib/modules/libglide2x.so
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) GLIDE: driver for Glide devices (Voodoo cards): Voodoo
(II) Primary Device is: PCI 00:05:0
(EE) No devices detected.
Fatal server error:
no screens found
It_s interesting that I wrote in the XF86Config-4 in the device section:
BusID "PCI:0:3:0"
but in the logfile, X recognizes:
(II) Primary Device is: PCI 00:05:0
Is this right?
PCI 00:05:0 is the Diamond Stealth 3d 2000 card, not the expansion card.
If needed, I'll send the whole logs and XF86Config again.
Best regards
Lucia Cosima Eiselstein
Reply to: