Re: XF86 4.2.1 and Diamond Stealth 3D 2000 with Diamond Monster II 3D expansion card
Try changing your BusID, I had that problem once. To confirm just do a
"lspci -n"
Good Luck.
* Lucia Cosima Eiselstein (Lucia@Eiselstein.de) wrote:
> Branden Robinson wrote:
>
> > On Wed, Jan 29, 2003 at 07:18:12PM +0100, Lucia Cosima Eiselstein wrote:
> > > I just tried to set up XFree86 4.2.1-3 with a Diamond Stealth 3D 2000
> > > card and a Diamond Monster II 3D expansion card.
> > > At the moment I'm struggling with the problems described in the logfile,
> > > attached to this e-mail. X doesn't want to start up, only gives the
> > > error messages
> > >
> > > "(EE) No devices detected.
> > >
> > > Fatal server error:
> > > no screens found"
> > >
> > > Hope that someone can help me and my somehow old hardware.
> >
> > Do you have the libglide2 package installed?
> >
>
> Yes, I have. Do I have to do something else after installing the
> deb-package? Following "man glide", I figured out that
> /usr/X11R6/lib/modules/libglide2x.so is a link to /usr/lib/libglide.so.2, not
> to /usr/lib/libglide2x.so how it should be. Changed that, changed the device
> section to:
>
> Section "Device"
> Identifier "Diamond MonsterII"
> Driver "glide"
> Option "dpms" "on"
> # BusID "PCI:00:03:02"
> BusID "PCI:0:3:0"
> EndSection
>
> Still the same result and log, here the last lines:
>
> (II) LoadModule: "glide"
> (II) Loading /usr/X11R6/lib/modules/drivers/glide_drv.o
> (II) Module glide: vendor="The XFree86 Project"
> compiled for 4.2.1, module version = 1.0.0
> Module class: XFree86 Video Driver
> ABI class: XFree86 Video Driver, version 0.5
> (II) Loading sub module "glide2x"
> (II) LoadModule: "glide2x"
> (II) Loading /usr/X11R6/lib/modules/libglide2x.so
> (II) LoadModule: "mouse"
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> compiled for 4.2.1, module version = 1.0.0
> Module class: XFree86 XInput Driver
> ABI class: XFree86 XInput driver, version 0.3
> (II) GLIDE: driver for Glide devices (Voodoo cards): Voodoo
> (II) Primary Device is: PCI 00:05:0
> (EE) No devices detected.
>
> Fatal server error:
> no screens found
>
>
> It_s interesting that I wrote in the XF86Config-4 in the device section:
> BusID "PCI:0:3:0"
> but in the logfile, X recognizes:
> (II) Primary Device is: PCI 00:05:0
> Is this right?
> PCI 00:05:0 is the Diamond Stealth 3d 2000 card, not the expansion card.
>
> If needed, I'll send the whole logs and XF86Config again.
>
> Best regards
>
> Lucia Cosima Eiselstein
>
>
> --
> To UNSUBSCRIBE, email to debian-x-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Regards,
Jsen
---
.--------------------------------------.
| Jsen |
| http://arsha.ne1.net |
| http://www.m0sh.net |
| Wanting To Die Is Your Reason To Live|
"--------------------------------------'
Reply to: