Re: No networking after resume from suspend
Richmond wrote:
> > Let's try from the bottom up?
> >
> > ip link show
> > will show you the interfaces recognized by the kernel. If this
> > works, it might show you an eth0, an en0, or something like a
> > enp22s0 device. Let's call it "SAM".
>
> Thanks for your reply.
>
> enp2s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
> > and make sure the cable is plugged in.
>
> :)
Ah, you laugh, but: the NO-CARRIER...UP... state DOWN means that
the kernel recognizes the device and there's a cable issue.
Go trace the cable, replug in both ends, and if that doesn't
work, replace the cable. If the far end has a free port, try
swapping to a different port - this one might be toasted.
-dsr-
Reply to: