Re: Jessie networking with multiple IPs (IPv and IPv6), single physical NIC
Tom Browder <tom.browder@gmail.com> wrote:
> On Wed, Jul 26, 2017 at 2:11 PM, Sven Hartge <sven@svenhartge.de> wrote:
> So can the above be simplified by leaving out the repeated info like
> dns-nameservers, gateway, and netmask to give something like:
> #=====================================
> iface eth0 inet static
> address 142.54.186.2
> netmask 255.255.255.248
> gateway 142.54.186.1
> dns-nameservers 192.187.107.16 69.30.209.16
> iface eth0 inet static
> address 142.54.186.3
> iface eth0 inet static
> address 142.54.186.4
> iface eth0 inet static
> address 142.54.186.5
> iface eth0 inet static
> address 142.54.186.6
I do believe you need the "netmask" option, but the rest is just needed
once. But from reading interfaces(5) I think you further simplify by
writing:
,----
| auto eth0
| iface eth0 inet static
| address 142.54.186.2/29
| gateway 142.54.186.1
| dns-nameservers 192.187.107.16 69.30.209.16
| iface eth0 inet static
| address 142.54.186.3/29
| iface eth0 inet static
| address 142.54.186.4/29
| iface eth0 inet static
| address 142.54.186.5/29
| iface eth0 inet static
| address 142.54.186.6/29
`----
Grüße,
Sven.
--
Sigmentation fault. Core dumped.
Reply to: