Re: Jessie networking with multiple IPs (IPv and IPv6), single physical NIC
Georgi Naplatanov <gosho@oles.biz> wrote:
> On 07/26/2017 09:22 PM, Sven Hartge wrote:
>> Tom Browder <tom.browder@gmail.com> wrote:
>>
>>> The proposed /etc/network/interfaces file:
>>> # begin =============================
>>> iface eth0 inet static
>>> address 142.54.186.2
>>> netmask 255.255.255.248
>>> gateway 142.54.186.1
>>> dns-nameservers 192.187.107.16 69.30.209.16
>>
>>> # add new IPv4 devices
>>> up addr add 142.54.186.3/29 dev $IFACE label $IFACE:0
>>> down addr del 142.54.186.3/29 dev $IFACE label $IFACE:0
>>
>> You don't need those up/down parts, you can add additional blocks for
>> eth0:
>>
>> auto eth0
>> iface eth0 inet static
>> address 142.54.186.2
>> netmask 255.255.255.248
>> gateway 142.54.186.1
>> dns-nameservers 192.187.107.16 69.30.209.16
>>
> I think that every additional interface should have suffix in its name -
> eth0:1, et0:2, etc.
No. That was ages ago and only a workaround for the broken ifconfig,
which is not able to cope with multiple IPv4 addresses per interface.
Since Wheezy you can have multiple "iface eth0 ..." blocks in
/e/n/interface without problems.
Grüße,
Sven
--
Sigmentation fault. Core dumped.
Reply to: