Dne 13.7.2016 v 09:52 didier gaumet napsal(a):
Le 12/07/2016 à 07:41, Pavel Kosina a écrit : [...] :~$ sane-find-scanner [...]found USB scanner (vendor=0x04b8 [EPSON], product=0x08a1 [EPSON L210 Series]) at libusb:001:005[...] Hi, according to sane-usb(5) and sane-epson2(5) manpages, it seems that sometimes a sane backend cannot automatically recognize a scanner despite sane-find-scanner finding it, so I would suggest you to insert this line in /etc/sane.d/epson2.conf in order for this backend to recognize your scanner: usb 0x04b8 0x08a1
Thank you - no, it doesnt not work, its the same: :~$ scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). # epson2.conf # # here are some examples for how to configure the EPSON2 backend # SCSI scsi EPSON # for the GT-6500: #scsi "EPSON SC" # Parallel port #pio 0x278 #pio 0x378 #pio 0x3BC # USB #usb # For libusb support for unknown scanners use the following command # usb <vendor ID> <product ID> # e.g.: #usb 0x4b8 0x110 usb 0x04b8 0x08a1 # Network # # net 192.168.1.123 net autodiscovery Pavel