[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Squeeze X86 with 4GByte RAM?

you could try the backported pae kernel I suggested, then

please keep your answers to the list only

Gábor Hársfalvi wrote, On 2013-04-04 19:37:
I know what Athlon 64 means. I use AMD CPU-s for a long-long years. I
used x64 systems too but I think x86 systems gives  me more
compatibility with any softwares so I stayed here. Also I know Linux
systems are able to manage more than 4 GByte of RAM with x86.

So if there is a suitable solution for me, I'd like to stay with x86
systems more.

baldyeti 2013. április 4., csütörtök napon a következőt írta:

    Athlon 64 was the processor which introduced the amd64 instruction set,
    so you should be able to run that if you want. If you're willing to
    re-install, you might as well go with wheezy at this point.

    Anyway, with a 4GB system you have to ask yourself whether you really
    need that extra 10-12% of memory: does your system swap currently?
    64 bits binaries tend to run a little faster yet use a little more
    memory (bigger words and pointers), so with a mere 4GB the gain is not
    huge. If I were you, I'd either let the system as is (specially if it
    runs comfortably under 3.5GB anyway), or parhaps try the PAE kernel
    available from backports (currently 3.2+46~bpo60+1, so fairly similar
    to the one wheezy uses).

    FWIW, I have an Athlon 64 3500+ system which runs fine with the
    2.6.36 PAE kernel from mepis11 (a squeeze variant).

    Gábor Hársfalvi wrote, On 2013-04-04 13:21:

        Dear Users,

        I installed 4GByte RAM in my motherboard succesfully. In BIOS I
        see all
        the 4096MByte, but after booting Squeeze it show me 3,5GByte. I
        know I
        should install the kernel with PAE - so I
        installed linux-image-2.6.32-5-686-__bigmem package and restart
        After it I choose this new kernel from GRUB. After loading it
        stuck with
        black screen with blanking cursor on the top left side of the

        What should I do?

    To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org with a
    subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
    Archive: http://lists.debian.org/__kjkd4l$486$1@ger.gmane.org
    <[🔎] kjkd4l$486$1@ger.gmane.org">http://lists.debian.org/[🔎] kjkd4l$486$1@ger.gmane.org>

Reply to: