Re: LSI MegaRAID SAS 9240-4i hangs system at boot
On 5/19/2012 2:52 AM, Ramon Hofer wrote:
> On Fri, 18 May 2012 17:57:56 -0500, Stan Hoeppner wrote:
>
>> On 5/18/2012 9:39 AM, Shane Johnson wrote:
>>
>>> After that I would look to see if
>>> something isn't shorting out a USB port.
>>
>> Yes, USB is the cause of the over-current errors, which is plainly
>> evident in his screen shot. But we don't yet know if this USB problem
>> is what's hanging the system. Further troubleshooting is required.
>
> The strange thing is as I mentioned in another post is that on the mb usb
> port 8 there's nothing attached and I haven't found where port 7 is :-?
I wouldn't worry about the USB errors at this point. Unless there is
some larger issue with insufficient power on the motherboard causing the
USB current error, it's likely unrelated to the storage hardware issue.
Fix it first, then worry about the USB errors. Given you have no
device plugged into those ports, it could be a phantom error.
--
Stan
Reply to: